Take the 2-minute tour ×
Cryptography Stack Exchange is a question and answer site for software developers, mathematicians and others interested in cryptography. It's 100% free, no registration required.

Are there any cryptographic hash functions for which there is a known pre-image attack, or a known second pre-image attack, but not both?

The attack doesn't have to be practical - just anything that beats the security claim of the hash function.

Intuitively, 2nd pre-image attacks would be easier to find than pre-image attacks, but I'm not aware of any examples or that either property implies the other.

I believe there are no known pre-image attacks on the common crop of hash functions in use today, so I'm interested in historic, obsolete and proposed-but-not-adopted hash functions, but not toy hash functions constructed specifically to demonstrate the possibility of such attacks.

share|improve this question
    
I deleted my answer because I confused second-preimage with collision attacks - my bad. –  orlp Aug 11 '13 at 23:05

2 Answers 2

up vote 15 down vote accepted

A cryptographic hash function $f : \{0,1\}^{*} \to \{0,1\}^n$ has three properties: (1) preimage resistance, (2) second-preimage resistance, and (3) collision resistance. Even further, these properties form a hierarchy where each property implies the one before it, i.e., a collision-resistant function is also second-preimage resistant, and a second-preimage resistant function is also preimage-resistant (with a condition on $f$).

In the case of (3) ⇒ (2), it's not too hard to see why: if an adversary cannot find any colliding message pairs, then they certainly cannot find a colliding message when one of the messages is fixed.

However, (2) ⇒ (1) is substantially trickier. For some intuition, consider a second-preimage resistant hash function $f$ that was not preimage resistant (modeled by being given access to a preimage-finding oracle). Suppose you were given a $m_1$; then you could compute $H(m_1)$ and consult the oracle for the preimage of $H(m_1)$. The oracle would then return a $m_2$ such that $H(m_1) = H(m_2)$.

This is very nearly a second preimage. The only question is if $m_1 \ne m_2$. Intuitively, given that $f$ maps infinitely-many inputs to a finite number of outputs, there "should be" a high probability that $m_1 \ne m_2$. For all real-life hash functions, this is pretty much the case, so a second-preimage resistant hash function should not lack preimage resistance.

However, it is possible to define "pathological" hash functions that have perfect, provable second-preimage resistance but not preimage resistance. The example given in chapter 9 of the Handbook of Applied Cryptography is this:

$$f(x) = \begin{cases} 0 || x & \text{if } x \text{ is } n \text{ bits long}\\ 1 || g(x) & \text{otherwise} \end{cases}$$

where $g(x)$ is a collision-resistant hash function. In this case, for digests beginning with $0$, it's trivial to find a preimage (indeed, it's just the identity function), but such cases are provably second-preimage resistant, as there are no possible second preimages. In other words, this $f$ is bijective across the space of $n$-bit inputs.

To be more precise about when (2) ⇒ (1), Rogaway and Shrimpton have presented a theoretical analysis of the various relations between the three properties listed above in their Cryptographic Hash-Function Basics. Essentially, their analysis treats a hash function as having a finite, fixed-length domain, i.e. $f : \{0,1\}^m \to \{0,1\}^n$, wherein they show

  1. "conventional implications", like the implication (3) ⇒ (2); these are essentially "true" implications in the sense that they are unconditional, and

  2. "provisional implications", like the implication that (2) ⇒ (1); these are conditional in nature, relying on how much $f$ compresses the message space (as the message space gets larger relative to the digest space, the "stronger" the implication in a probabilistic sense).

So, provisional implications are essentially true if a hash function compresses the message space to a sufficient degree. (The "sufficient" example they provide is a hash compressing 256-bit messages to 128 bits.) Hence, second-preimage resistance implies preimage resistance only if the function in question compresses its input sufficiently. For length-preserving, length-extending, or low-compression functions, second-preimage resistance does not necessarily imply preimage resistance (as stated by the authors on page 8 about halfway down the page).

This should be intuitive given the above algorithm for finding second preimages given a preimage oracle. If you are expanding 6-bit inputs to 256 bits, it's actually quite unlikely that a preimage oracle would be able to find a second preimage. This isn't a formal argument, by any means, but it's a nice heuristic one.


Now, back to real life. Given the above algorithm for using a preimage oracle to find second preimages, I would not expect any real-life hash functions to have preimage attacks and not second-preimage attacks, especially since real hash functions typically compress data well.

On the other hand, I'm not personally aware of any historically-used, non-toy cryptographic hash function which has a second-preimage attack but not a preimage attack. Typically, collision resistance is the first thing attacked by cryptanalysts since it is (in a sense) the "hardest" property to satisfy. But if a hash function is found to be broken with regard to collisions, cryptanalysts typically go straight for the heart: preimage attacks. So, I don't know how much luck you'll have trying to find such a hash function.

You can look at the hash function lounge for some historic hash functions; it hasn't been updated since 2008, apparently, but still contains some useful info. I glanced through a few attacks and found mostly collision and preimage attacks, but you may have more luck.

share|improve this answer
    
The easiest way to construct a provably secondary preimage resistant (hash) function, is to choose a bijective function. You might want to expand on that. –  Henrick Hellström Aug 12 '13 at 10:36
1  
@HenrickHellström: Usually, hash functions are assumed to be maps from $\{0,1\}^*$ to $\{0,1\}^n$ for some fixed $n$. No such map is a bijection. But yes, if we're allowed to narrow down the domain or expand the range of our hash function enough to make it bijective (or at least injective), it's easy to make even trivially weak hash functions 2nd preimage resistant. In particular, the identity function is clearly 2nd preimage and collision resistant, but finding first preimages is trivial. –  Ilmari Karonen Aug 12 '13 at 19:04
    
@IlmariKaronen: The example in HAC is a function $h(x) = 1|x$ if $x$ is $n$ bits long, $h(x) = 0|g(x)$ otherwise. If $g(x)$ is a cryptographic hash function, then $h(x)$ will be collision resistant and secondary preimage resistant, but not primary preimage resistant. –  Henrick Hellström Aug 12 '13 at 19:18
1  
@IlmariKaronen: The question I implied with my first question was if Reid might tighten up the argument that a not "pathological" hash function that is not primary preimage resistant, must lack secondary preimage resistance. I don't know, but it doesn't seem impossible, given a more technical definition of "pathological". –  Henrick Hellström Aug 12 '13 at 19:27
    
@HenrickHellström: Per your recommendation, I've fleshed out the answer quite a bit. It's quite lengthy now, but contains much more good content imo. –  Reid Aug 13 '13 at 4:06

In their paper Second Preimages on $n$-Bit Hash Functions for Much Less than $2^n$ Work, Kelsey and Schneier provide:

a second preimage attack on all $n$-bit iterated hash functions with Damgard-Merkle strengthening and $n$-bit intermediate states, allowing a second preimage to be found for a $2^k$-message-block message with about $k\times2^{n/2+1}+ 2^{n-k+1}$ work

as opposed to the expected $2^n$ work. This is firmly in the realms of theoretical attacks, but meets the criteria of being a second-preimage attack, not a preimage attack, and it applies to all the commonly used hash functions prior to SHA3.

The example they provide: a second pre-image can be found for a $2^{60}$ byte message processed with SHA1 in $2^{106}$ work rather than $2^{160}$. This is the largest message SHA1 can process; if we pick a more plausible but still large message size, say a SHA1 hash over a 4TB disk, or approximately $2^{38}$ message blocks, the work to find a second pre-image is approximately $38 \times 2^{{160/2} + 1} + 2^{160-38+1} \approx 2^{123}$.

Thanks to Reid for the pointer to the Hash Function Lounge where I found this paper.

share|improve this answer
    
Good to see you found some useful information! Apparently, what I should have used was the search function instead of trying to spot attacks on some historic hash functions... –  Reid Aug 15 '13 at 2:05

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.