AES (Advanced Encryption Standard) is a symmetrical block-cipher algorithm with a 128-bit block size, and key sizes of 128, 192 or 256 bits.

learn more… | top users | synonyms

1
vote
2answers
1k views

What is more secure, a ciphertext encrypted with AES-256 or encrypted with 3 different AES-128 keys?

Or better yet, is encrypting a block with 2 AES-128 keys just as secure as encrypting a block with 1 AES-256 key? By the way, I've only recently been learning cryptography stuff; I've made working ...
1
vote
1answer
755 views

Encrypting firmware with AES and no IV [closed]

I have an embedded device with a AES CBC engine on it that is used to ensure the integrity of the firmware. I know that CBC mode requires unique IVs to be any good, but I'm unsure if it makes a large ...
1
vote
2answers
5k views

AES Algorithm processing time in Arduino vs Raspberry Pi

The Arduino employs an 8-bit ATmega series microcontroller whereas the Raspberry Pi is based around a 32-bit ARM processor, and the Arduino is typically clocked at between 8-16MHz and with 2-8kB of ...
1
vote
1answer
364 views

How to verify a shared secret using only AES?

I have two devices that need to verify that they both are in possesion of the same secret key. One of the devices is a very limited embedded device that only has AES128 available, no SHA or other hash ...
1
vote
1answer
1k views

AES-CMAC passes every test except two

i wrote this code: ...
1
vote
1answer
6k views

How does one implement the Inverse of AES' MixColumns

I got an answer in the related question about Mixcolumn for encryption, but how about decryption? what will I do? Because it said that I will used this: During decryption the Mix Column the ...
1
vote
1answer
102 views

Is super encryption (aka “multiple encryption”) always good?

I'm trying to use super encryption (also known as “multiple encryption”) with AES in CFB mode with IV and password salting and AES in CTR mode both without padding. I first use AES CFB and then AES in ...
1
vote
1answer
135 views

Implement AES with 16 bit block size?

Can we implement AES with 16 bit block size ?if so what are its advantages and disadvantages?Is there any rule AES has to be implemented with 128,192,256 ?Can we use AES for odd number of ...
1
vote
1answer
189 views

Ensuring integrity and confidentiality together with symmetric encryption

I've been required to answer a question: As usually, we have Alice and Bob. Suppose Alice wants to send a file F to Bob, ensuring integrity and confidentiality. They share a symmetryc key ...
1
vote
1answer
264 views

Where is the authentication tag stored in file encrypted using AES-GCM?

So I am using cryptopp to encrypt a file in a project and I am using AES-GCM. I have a 256bit key and a 128bit ivec and a 128bit tag that I use to encrypt files. However, I want to know where the ...
1
vote
1answer
264 views

Is the output of AES-CBC + MAC the same size as the input?

I use AES-CBC and HMAC-SHA256 to encrypt a text file. Will the output be larger in size than the input or will it be the same size? Is it more secure secure if the size of the output is larger?
1
vote
1answer
140 views

Adding an IV to an AES implementation

I have an embedded project that requires AES, I seem to have found an AES implementation that fits the bill here: http://www.literatecode.com/aes256, but it does not include an IV. Are there any ...
1
vote
2answers
81 views

Key cracking: Prefer many small texts over one large text?

If an attackers sets out to crack the symmetric key of e.g. AES-CTR, would they prefer to have access to many small cryptotexts or one large cryptotext? I.e. is it more interesting for the attacker to ...
1
vote
1answer
201 views

Is CTS necessary on a AES-CBC DRBG?

As I understand it, CTS pads the last block and swaps it with the second last to compensate for a partial block of data. I have written a DRBG (Deterministic Random Bit Generator) using AES-CBC that ...
1
vote
1answer
111 views

Prefixing data before encryption for passphrase confirmation?

I'm encrypting data with AES, using CryptoJS. CryptoJS returns an empty string in case the data couldn't be encrypted with the given passphrase. I'm not sure if this is intended, or happens in all ...
1
vote
2answers
748 views

Using IV buffer after altered inside a Rijndael CBC Encryption/Decryption process as IV for next message?

When sending a block to be decrypted or encrypted, with RijndaelCBC, we input the data to decrypt/encrypt and an IV for syncing and to prevent identical outputs for identical inputs. This question is ...
1
vote
1answer
1k views

Is the salt value a secret or can it be stored in cleartext just like the IV? [duplicate]

From Wikipedia I read that the IV is used to randomise the mapping of cleartext to cipher text and that the IV is usually stored (in cleartext) together with the encrypted record. ...
1
vote
2answers
496 views

Is it worth applying a MAC on data in a HSM?

I'm building a basic HSM out of an Arduino, and am using the following scheme to store data: Master symmetric key $k_m$ stored in firmware (secure bit set to prevent trivial extraction). Secondary ...
1
vote
1answer
609 views

Partial decryption of large file in AES-GCM (or other modes)?

Lets assume a 4gig file that is internally made of 1 million pages of 4k bytes each (page). the file was originally AES-GCM encrypted these pages (or entire file) lives across the internet i.e. ...
1
vote
5answers
2k views

How easily could this be cracked?

I'm looking into encrypting files like this: First, I SHA-1 hash the password. Let's say the password is something normal like "hello123", and then hashed. Then I encrypt a file using this: ...
1
vote
1answer
4k views

Removing Padded Value in Decrypted Message

How to remove padded value in Decrypted Message? I am using AES Algorithm. Let's take this as the decrypted message: "abcdefghijklmn " There is a 2 space in ...
1
vote
1answer
40 views

How is decryption done in AES CTR mode?

Since AES CTR mode uses a unique IV and counter to produce the key to XOR with the plain text to get the ciphertext, the question is so as to how decryption is done. Since AES CTR produces a ...
1
vote
1answer
65 views

SHA256(RsaPrivateKey) == AES key?

I have an RSA private key (more specifically, an SSH key in Putty format, 4096bit) and want to use its SHA256 hash as an AES256 key, instead of using an independent newly generated AES key. Are ...
1
vote
1answer
51 views

Disk encryption using AES-CBC: is reliance on previous block data a downside?

I have seen drives that boast that they use AES with CBC mode, which doesn't really make sense in my opinion, sure it's more secure than ECB (but actually, leaving security aside, ECB is better suited ...
1
vote
1answer
88 views

HMAC-SHA1 vs. AES

This might be a very silly question, but I am a total novice in encryption. I don't know where to start searching for an answer to this problem. I am building applications using a proprietary ...
1
vote
3answers
69 views

Is it safe to use AES-CBC like this?

Is it safe to generate the IV for AES-CBC as the following? It's like the real IV is all zeros. The first block of data will be a low-entropy but unique data. Once the first block is encrypted, the ...
1
vote
1answer
118 views

AES-256 mode with per-block-key being a SHA-256 of SHA-256 of secret key, random public salt and block number. What's amiss?

Please criticize the (homebrew?) mode described below; to point out a single major defect/uncertainty or the link to (the analysis of) an equivalent construction is quite enough. Assume the ...
1
vote
1answer
527 views

Precisely how does CBC mode use the initialization vector? [duplicate]

As I understand it, AES in CBC mode does an XOR of the 128-bit initialization vector and the first 128 bits of plain text. Is this correct? I am using the PHP 5.3 openssl extension in aes-256-cbc ...
1
vote
1answer
112 views

Padding size with a CBC Block cipher in TLS

I'm currently looking at an encrypted Client Finished message in Wireshark from a TLS session. The cipher suite that was agreed on in previous messages was ...
1
vote
1answer
145 views

Is it OK to encode data using key equal to data

For some project, I need to store some short string in encrypted form. It would be ideal for the current purposes to encrypt it using itself. ...
1
vote
1answer
178 views

Clefia Vs AES 128 bit

I am running a comparison between Clefia (Lightweight cipher from Sony Corporation which is a standard now http://www.sony.net/Products/cryptography/clefia/standard/index.html) and AES 128 bit. The ...
1
vote
2answers
83 views

Is a padding oracle attack possible if data is only encrypted internally on a server (e.g. for storage)?

I read something about the padding oracle attack when analysing the use of an AES-encryption of data in a database and was "scared" it could be a serious issue. But after investigating a bit further, ...
1
vote
1answer
485 views

Why don't PyCrypto and M2Crypto produce the same result as OpenSSL here (AES-128 ECB)

If I run the following, for openSSL: echo -n "0123456789abcdef0123456789abcdef" | openssl aes-128-ecb -nosalt -nopad | xxd and enter the key "YELLOW SUBMARINE", ...
1
vote
2answers
163 views

Equivalent key size between HMAC and AES?

I have seem comparison between AES and RSA, e.g., AES 128 bit key is equivalent to RSA modulus 3072 bits. Is there such comparison between AES key size and HMAC?
1
vote
1answer
76 views

Hardness proof?

I am little curious about how do we calculate hardness proof of any cryptography algorithm? Also where can I find hardness proof for AES and AES-CBC ?
1
vote
1answer
72 views

where to keep the AES keystream?

I am trying to implement an AES encryption on my messages in my app and I want to have a different keystream for each "message group". Therefore, currently I am holding the keystreams in the database ...
1
vote
1answer
316 views

How can I find the multiplicative inverse in the first transformation of the SubBytes() transformation in AES?

In FIPS-197 §5.1.1 , it says the first transformation in the SubBytes() transformation is: Take the multiplicative inverse in the finite field $\text{GF}(2^8)$ described in Sec. 4.2; the ...
1
vote
1answer
406 views

About the Rijndael/AES sbox polynomial (subBytes)

I've recently read a question about the irreducible polynomial behind the subBytes() operation in the Rijndael that has awakened and old curiosity I have: Why $\,m(x)$ was chosen as ...
1
vote
1answer
392 views

AES-256 Shift-Rows Offsets

I am currently trying to implement a AES-256 cipher according to this sepcificaciton: http://techheap.packetizer.com/cryptography/encryption/spec.v36.pdf As well as on Wikipedia and in the document ...
1
vote
1answer
193 views

simple multiplication in GF(8)

I am trying to do multiplication in the GF($2^3$) defined by the irreducible minimum binary polynomial $X^3+X^2+1$. I want to multiply $A(x) * B(x)$ where $A(x) = x$ and $B(x) = x^2$. The ...
1
vote
1answer
704 views

AES mode for file encryption

I'm working on software that should eventually result in a crypto file system similar to encfs. So far, i have a user password that goes through PBKDF2 using ...
1
vote
2answers
567 views

AES-CBC and IV — Encrypting multiple blocks of a file with the same IV?

I have large files which are broken into blocks of 512 KB and uploaded to a server. In my DB I store the IV, and the user knows the security key themselves. When downloading, I use the same IV and ...
1
vote
2answers
518 views

Game traffic encryption AES CTR + HMAC

I was asked to implement traffic encryption between the game server and clients. Currently, the traffic is not encrypted in any way, which lets players use cheats to listen to the traffic in order to ...
1
vote
1answer
478 views

Can AES decrypt with a wrong key?

The title is asking the question in layman terms, but what I really mean to ask is this: Let $x \in \lbrace 0,1 \rbrace^{128}$ (an arbitrary input block) and let $K \in \lbrace 0, 1 \rbrace^{128}$ ...
1
vote
1answer
5k views

What does AES256-CTS-HMAC-SHA1-96 mean in relation to Kerberos?

I'm not completely clueless as to what it means, but I'd like to understand it at a higher level. The highest encryption type used by Active Directory domain controllers for Kerberos authentication ...
1
vote
1answer
5k views

Can AES use PKCS#5 padding

From What is the difference between PKCS#5 padding and PKCS#7 padding, I understand that PKCS#5 is defined for 8 byte block sizes. Does this rule it out as a padding option for AES since AES has a ...
1
vote
2answers
2k views

is AES secure for java application licensing

I have to license a java application and want to code a quick implementation, the scheme I came up with is: 1) The Application calculates a string X which we assume to be the md5 sum of the ...
1
vote
1answer
2k views

Use of CBC-AES-256 to encrypt usernames

I came across some code in our project that encrypts usernames (limited to 50 chars, most are less than 10) using the following parameters: IV size is 16 bytes Key size is 32 bytes Algorithm is ...
1
vote
1answer
369 views

brute force attack on KDF vs KEY

if we believe 256bit keys are secure in AES against any brute force attack, is that possible we use a KDF (convert user's weak entered password in truecrypt into a fixed AES key) with too much round ...
1
vote
1answer
1k views

AES CBC with fixed or predictable IV, what are the risks?

I am making a call with parameters from application "A" to a web application "B". Parameters are in the query string of the URL. They don't need to be hidden. But I want to be sure that nobody can ...