AES (Advanced Encryption Standard) is a symmetrical block-cipher algorithm with a 128-bit block size, and key sizes of 128, 192 or 256 bits.

learn more… | top users | synonyms

0
votes
1answer
854 views

Diffie-Hellman Secret Exponent Size and Shared Secret Usage [closed]

I'm developing my own protocol and I'll use Diffie-Hellman to achieve PFS. It will work in this way: The symmetric encryption algorithm will be AES_256_CBC. The DH parameters will be: P: a 2048-bit ...
0
votes
2answers
184 views

The security of the AES secret itself

I am writing an application, running on a server, where multiple users access data from a database which is AES encrypted with a master secret. The master secret itself is initially randomly ...
0
votes
1answer
824 views

Is AES reducible to an NP-complete problem?

Is breaking AES NP-hard? Can the security of AES be reduced to a NP-complete problem? If it is reducible, what does the reduction look like? If it is not reducible, why do we assume it is secure?
0
votes
1answer
85 views

Is this cascading encryption, and is my security weakened as a result?

I'm trying to understand what is, and what is not, considered cascading encryption. All of the posts and conversations I've read over the past few days discourage the practice, including this article. ...
0
votes
2answers
49 views

Stripping off message authentication or signature

If attackers can strip off RSA / EC / -DSA digital signature and conduct CCA on AES-CTR or CBC payload, why can't they do the same for AES-GCM?
0
votes
1answer
51 views

Is webkey a reasonably secure authentication system?

I just created Webkey in the last couple days. This should allow any website to do single-password auth with a much higher level of auth security and convenience for users (single password with ...
0
votes
1answer
38 views

Proper authenticated encryption

I am using AES-CBC, authenticating using HMAC-SHA512 and I was wondering whether my thought process and implementation are correct. The message send over the network is: ...
0
votes
1answer
28 views

Sodium crypto_aead_aes256gcm_encrypt ciphertext length > plaintext length

Using the crypto_aead_aes256gcm functions from Sodium produces a ciphertext of "at most mlen (plaintext length) + crypto_aead_aes256gcm_ABYTES bytes (16 bytes) are put into c (ciphertext), and the ...
0
votes
1answer
40 views

PyCrypto and AES: can i use a longer key than the block size (16byte)?

I see that in many scripts are used keys of 16 characters for a block of 16 byte, but can I use key of 40 (for example)? And then why in some scripts with aes module the block size is set to 32 byte ...
0
votes
1answer
67 views

Why does AES ciphertext entropy always close to 8?

I have three binary files: 31744 byte length (1), 5712980 byte length (2) and 10806008 byte length (3). The alphabet is all 256 symbols from 00 to ff. I compute the shannon entropy, replacing ...
0
votes
2answers
32 views

Trying to understand MixColumns with Hexadecimal matrix

I am trying to read and understand the textbook's exercise questions. The sample solution at the end the textbook has a final answer and it does not clarify how it got the result. I am trying to ...
0
votes
2answers
120 views

NIST tests for AES [closed]

How to do the benchmarking of a self implementation of AES algorithm using NIST test suites? I am unable to find enough material on the internet regarding this.
0
votes
1answer
96 views

Making both the IV and salt public for PBE with AES-CFB

Is it okay to make both the IV for AES-CFB and the salt for PBKDF2 public? Does this action of mine compromise security in any way? I have an implementation of this cipher and had previously asked a ...
0
votes
1answer
70 views

Encryption(AES) and verification per message

I want to send/receive messages with A (an peer) using TCP socket. I want to encrypt messages using AES CBC. Only I and A know a symmetric key K1 used in AES CBC, and K2 used in HMAC. The size of each ...
0
votes
1answer
73 views

SSL certificate / SSL configuration - FIPS-197 compliance

What does it mean when we talk about FIPS-197 compliance in the context of SSL certificates, their deployment and usage ? I am almost certain that the FIPS-197 compliance in the context of SSL ...
0
votes
1answer
470 views

AES Mix Columns and Shift Rows

Why we use Mix Columns and Shift Rows in AES? FOr example, if i want implement an AES algorithm without Mix Columns and Shift Rows what is the difference in the ciphertext?
0
votes
1answer
815 views

What do I use as the encryption key and initialization vector in AES cfb128

I'm writing a program that can encrypt a file using AES cfb128 (using Openssl and C++). The scenario of the program is this: Person A visits computer, encrypts a file they make, takes away a key ...
0
votes
1answer
80 views

AES inversion operation in sub byes

I was wondering why in the AES sub-bytes operation one can represent the inversion as computing $x^{254}$. What is the reason for this? Moreoever, I was wondering what the text on page 212 of ...
0
votes
1answer
242 views

Block cipher mode with diffusion on ciphertext

As I understand, diffusion property in AES-CBC ensures that one-bit change in plaintext will yield changes in all following blocks in ciphertext upon encryption. I'm looking for algorithm that will ...
0
votes
1answer
231 views

Repair AES-128 decrypted file

I decrypted a file which was encrypted with OpenSSL and AES-128 with the wrong password. Before I noticed it was the wrong password I removed the original file. Is there a possibility to reproduce the ...
0
votes
2answers
312 views

CTR HMAC SHA256 implementation

After trying to invent my own AES mode, I decided to just implement something that's known to work, namely CTR with HMAC SHA256. From what I understand, I can use the IV as a counter, and the IV ...
0
votes
2answers
137 views

AES key from encrypted text and VI

So I'm trying to figure out if it's possible to extract the private key if you have the ciphertext and the IV corresponding to that ciphertext. It's for some kind of a challenge, and can't really ...
0
votes
1answer
111 views

AES different modulo operations

I don't get the modulo 10001 operation in mixColumns so much. If I have to take the byte computations mod 100011011 anyway what leads me to a result of 4byte length, why do I need the mod 10001 ...
0
votes
2answers
367 views

Client-Server application how can data be encrypted so only clients can read it

Requirements We are building a system that connects multiple clients through a restful API. It allows the creation of groups of trusted clients. We need a way to store group shared data encrypted ...
0
votes
2answers
163 views

Where to store the file extension to retrieve it correctly after decryption

I am using Java to write AES-256 to encrypt various files with different extension, the problem is, where am I suppose to store the file extension so the if the data is decrypted, the file extension ...
0
votes
1answer
102 views

Direct sum of Binary numbers In Mixcolumns

I have just started learning cryptography and I am trying to make sense of the direct sum on some binary numbers. I am trying to find a column of a state space after a Mixcolumns operation has been ...
0
votes
1answer
331 views

Error propogation in CBC mode

Going through the wiki for modes of operation I see that the section error propogation says that an error in one block in the ciphertext in CBC mode only impacts two blocks. I do not quite get that. ...
0
votes
2answers
3k views

Multiplicative inverse in $GF(2^8)$?

I know how to do multiplication over $GF(2^8)$. Logic is... ...
0
votes
1answer
4k views

AES: keylength and password length? [closed]

What is the difference between the keylength and the length of a password for AES-256?
0
votes
1answer
493 views

What is the complexity of the Square attack against the reduced 4-rounds 128-bit Rijndael variant?

I'm looking at a square attack against a reduced version of AES-128 with only 4 rounds (with block and key size of each 128 bit). I have a set of 256 plaintext-ciphertext block pairs. What is the ...
0
votes
1answer
226 views

Design criteria for AES

I hope somebody can help me understand the design criterias for AES. Therefore, I would be really thankful if somebody could explain "non-linearity" in this context. A criteria for the s-box in AES ...
0
votes
2answers
73 views

Brute force knowing a part of the password

So here is the problem, my brother forgot about the eight digit numeric part of his password, he is using Ubuntu 15.04 default whole disk encryption To make it clear, this was his password (example) ...
0
votes
1answer
50 views

Key derivation using the main AES encryption key and some plain text

I am using AES 128 bit encryption in java. I have an encryption key and 10 digit plain text. I want to derive a key for HMAC using the AES encryption key and the 10 digit plain text. This plain text ...
0
votes
1answer
104 views

What is a branch number in the PAEQ algorithm?

I'm reading an article about authenticated encryption algorithm - PAEQ. It uses a permutation function AESQ, which has transormations from AES. And there is written about MegaSBoxes, which contain 4 ...
0
votes
1answer
62 views

Hardware optimized stream ciphers?

As I understand it, ChaCha20 is slower than AES-CTR in hardware. Are there any hardware-optimized stream ciphers?
0
votes
2answers
105 views

Why IV does not have to be secret yet has to be random [duplicate]

The IV used in schemes such as CBC has to be random and unpredictable. But at the same time it does not have to be kept secret. If the IV does not have to be secret, why does it have to be random ...
0
votes
1answer
62 views

Are there AES128 keys such that first round key equals last round key?

I am looking for AES128 keys such that the last round key is exactly the first round key (which is simply the key). Any pointer to a proof that they exist or that they don't would be welcome. In the ...
0
votes
1answer
106 views

Using AWS KMS with AES GCM

I am implementing client-side encryption for data stored in AWS DynamoDB, and was wondering about the correct use of AWS KMS for key management in addition to using AES/GCM. I am using the master key ...
0
votes
1answer
95 views

Galois Field ($2^{16}$) for encryption in place of $GF(2^8)$ in AES

AES algorithm is using $GF(2^8)$ Galois Field. What if we use $GF(2^{16})$ in place of $GF(2^8)$? Will this improve the algorithm or not?
0
votes
1answer
96 views

how to get the file used to brute force any encryption method [closed]

Bitlocker as example uses AES 128 Bit encryption as default - if it was brute forced how it can be done , I mean where's the file that will be brute forced to generate the password (If I'm right that ...
0
votes
1answer
89 views

Explain same encryption time for two files of different sizes

I am encrypting files in a two layered fashion as follows: Inner layer is 128 bit AES-CTR encryption Outer/Second layer is a simple one time padding with a particular key. While testing the ...
0
votes
1answer
50 views

Probability of $D_k(a*k+b) =p$ for a PRP

I'm wondering what the probability of a PRP having numerous keys (say 3 or more) with the same simple idempotent, or near identity, function. For example, does there exist values of $p, a, b, x_1,$ ...
0
votes
2answers
62 views

Get AES key from client request

I get a request from a client who encrypts the message with the wrong AES key. Is there a way for me to know what AES key the client actually used? I understand I may get the decrypted msg which is ...
0
votes
1answer
133 views

computational complexity class of decryption of AES [closed]

I haven't really seen what computational complexity class of decryption of AES is. Can anyone provide reference papers or answers here?
0
votes
2answers
1k views

AES-CTR in BouncyCastle with string key, without IV or salt [closed]

Our team is encrypting data using a javascript snippet. My problem is I'm supposed to parse them back in my Java code. I am having troubles identifying parts of the algorithm. The code says it's CTR ...
0
votes
1answer
364 views

How was the MDS matrix used in AES chosen?

$$\begin{pmatrix}2&3&1&1\\ 1&2&3&1\\ 1&1&2&3\\ 3&1&1&2\end{pmatrix}$$ In the above MDS matrix used in AES encryption, why are the numbers $2$,$3$ and ...
0
votes
1answer
231 views

Why using AES in ECB (Electronic Code Book) mode a bad idea? [duplicate]

Why using AES in ECB (Electronic Code Book) mode a bad idea? is CTR mode better? Given only these two can be used for parallelization.
0
votes
1answer
75 views

Authenticating small packets

I intend to authenticate small packets of data, between 16 and 256 bytes each. For some of them encryption will also be required. This will be used on small micro controllers, with RAM sizes ranging ...
0
votes
1answer
73 views

Segmenting encryption to get the same results with the same key

The given examples below are dummy and in English. They are mainly for place holding as this is a concept question rather specific example based Given AES has a block size of 128 bit (16 letters of ...
0
votes
1answer
315 views

Where can I learn the basics of AES?

I was tasked with making an expo about AES and its steps, but I still can't grasp it, especially when it comes to "key schedule". Does anyone know some good material to start learning? Or can someone ...