AES (Advanced Encryption Standard) is a symmetrical block-cipher algorithm with a 128-bit block size, and key sizes of 128, 192 or 256 bits.

learn more… | top users | synonyms

0
votes
1answer
55 views

PyCrypto and AES: can i use a longer key than the block size (16byte)?

I see that in many scripts are used keys of 16 characters for a block of 16 byte, but can I use key of 40 (for example)? And then why in some scripts with aes module the block size is set to 32 byte ...
6
votes
3answers
884 views

AES key reuse and guessing the key

Bit of a noob question and a fair bit of Googling didn't help. I understand that the current encryption standard is AES256. A few questions Is the point of this (and other encryption techniques) to ...
0
votes
1answer
77 views

Why does AES ciphertext entropy always close to 8?

I have three binary files: 31744 byte length (1), 5712980 byte length (2) and 10806008 byte length (3). The alphabet is all 256 symbols from 00 to ff. I compute the shannon entropy, replacing ...
1
vote
1answer
116 views

HMAC-SHA1 vs. AES

This might be a very silly question, but I am a total novice in encryption. I don't know where to start searching for an answer to this problem. I am building applications using a proprietary ...
0
votes
0answers
19 views

is it possible to reverse engineer the key on a AES-256 encryption? [duplicate]

If I have the original text and the encrypted one, is it possible to reverse engineer the key? And more importantly is it doable ? I tryed to look up the algorithm but i'm way too rusted and with no ...
0
votes
0answers
88 views

Difference between AES-CCM and AES-CCM*

I'm trying to understand the different between AES-CCM and AES-CCM* (as defined in IEEE Std 802.15.4™‐2011, Annex B). I see that there are more restrictions on L and M and also M=0 is allowed: L = 2 ...
1
vote
0answers
45 views

Rijndael variant using AES for key schedule?

The weakest part of Rijndael is considered to be the key schedule (I believe that this is true for all variants, including ones not standardized as AES). One solution to this problem is to use (...
6
votes
1answer
163 views

Is there any benefit to verifying PKCS#7 padding when using AES CBC and HMAC?

As I'm using HMAC to ensure integrity and authenticity of the ciphertext, is there any additional security benefit to verifying PKCS#7 padding when decrypting using AES CBC? A previous question asked ...
4
votes
2answers
148 views

Help with breaking AES reduced to 2 rounds

I was studying Rijndael AES proposal, and its cryptanalysis. I started with writing code to break AES reduced to 2 rounds. I am using 128 bit key size and 128 bit block size. 2 round AES means the ...
0
votes
2answers
45 views

Trying to understand MixColumns with Hexadecimal matrix

I am trying to read and understand the textbook's exercise questions. The sample solution at the end the textbook has a final answer and it does not clarify how it got the result. I am trying to ...
3
votes
2answers
700 views

Is AES solvable by reducing to SAT?

Consider a known plaintext attack on AES — just so we have an actual system of equalities that we can feed to a SAT solver. Is AES solvable in this way? In other words, will the algorithm eventually ...
0
votes
1answer
100 views

Key derivation using the main AES encryption key and some plain text

I am using AES 128 bit encryption in java. I have an encryption key and 10 digit plain text. I want to derive a key for HMAC using the AES encryption key and the 10 digit plain text. This plain text ...
5
votes
1answer
127 views

Fixed-prefix IV in CBC mode

I know the Initialization Vector needs to be unpredictable. Does it apply to the IV as a whole, or to every bit in the IV? I have multiple devices with poor entropy sharing the same key and I want to ...
0
votes
1answer
43 views

What about using AES-ECB with random IV?

Let P1P2...Pn be n blocks plaintext, and M0 be a random IV. Then a n+1 blocks message M0M1...Mn can be constructed by setting Mi+1 = Mi xor Pi+1. Finally, we use AES-ECB to encrypt this message. Is it ...
2
votes
0answers
49 views

Active s-box of 8x8 MDS for AES

one way to enhance the security of AES by increasing the number of active s-boxes .larger MDS matrices are used to increase the number of active s-boxes. using 4x4 MDS matrix generate 25 active s-box ...
0
votes
1answer
58 views

Apple encrypted DMG volumes strength?

Apple OS X can create encrypted AES 128/256 DMG volumes. Here is written about a men who was able to hack it. And also that DMGs use PBKDF2-HMAC-SHA-1. I couldn't find more information about encrypted ...
0
votes
1answer
126 views

What is a branch number in the PAEQ algorithm?

I'm reading an article about authenticated encryption algorithm - PAEQ. It uses a permutation function AESQ, which has transormations from AES. And there is written about MegaSBoxes, which contain 4 ...
5
votes
1answer
432 views

Applicability of birthday attack to AES brute force

Is the following snippet from a recently published cryptography book correct? EDIT: Expand the snippet from the book to make the context (symmetric key search) more clear. You can apply this to ...
1
vote
1answer
76 views

How to perform AES MixColumns as matrix multiplication in GF(2) (boolean values)?

AES MixColumns is done by multiplying a $4 \times 4$ matrix and a column of the AES state (a vector). Addition and multiplication are done in $\operatorname{GF}(2^8)$. In the paper White-box AES, the ...
4
votes
1answer
86 views

ChaCha20 immune to timing attacks

What are the reasons because of which ChaCha20 is immune to timing attacks ? Also why is not AES immune to timing attacks?
15
votes
3answers
686 views

Is there an AES identity key?

The following questions are of pure theoretical nature. I don't have an application in mind. Is there a key that makes AES the identity function? Is there a key that makes AES the identity function ...
1
vote
1answer
134 views

AES implementation to encrypt files

I'm making a small python program to encrypt an arbitrary text file. Currently I have a file to store passwords (hashed values), so nothing stored in plaintext. The user enters the command line ...
3
votes
2answers
269 views

Is it possible to decrypt cryptowall-encrypted files? [duplicate]

I am writing regarding a certain ransomware program called cryptowall (prop 4.0). I have lost many documents to this, and as it so happens, I have a few file duplicates before and after they were ...
0
votes
2answers
115 views

DIY over-encryption with a related key

I know next to nothing about cryptography, which is bad because I'm a programmer. I was exploring some code the other day and the encryption part of it seemed a little strange to me. I'd like the name/...
0
votes
1answer
65 views

Hardware optimized stream ciphers?

As I understand it, ChaCha20 is slower than AES-CTR in hardware. Are there any hardware-optimized stream ciphers?
1
vote
2answers
172 views

PHP AES 256 CBC faster than AES 128 CBC? Or am I doing something wrong?

for last couple of days I'm learning a bit about encrypting data in PHP, as I need a good encryption/decryption function for storing user's passwords in DB. I use ...
1
vote
0answers
47 views

Effect of the birthday bound on AES-GCM

What is the effect of the birthday bound on the security of AES-GCM, when a very large number of messages are encrypted? I am looking for attacks that are useful in obtaining information about the ...
0
votes
0answers
53 views

Importance of timing attack resistance with AES

I've implemented AES in my library with several variations: a straight C version, a version using x86 SSSE3, and a version using x86 AES-NI. The SSSE3 and AES-NI implementations are constant-time, ...
1
vote
0answers
36 views

Why was AES limited by NIST to a 128-bit block size, although Rijndael could support more? [duplicate]

Rijndael could support block sizes up to 256 bits; this seems to be useful in AEAD. Wht did NIST restrict AES to a 128-bit block size?
1
vote
1answer
115 views

128 Bit AES Issue

I'm trying to use the 128bit TI_aes implementation on my 16bit microcontroller and I'm having the weirdest issue. Every input where two bytes within a word are identical two nibbles within a byte ...
2
votes
1answer
71 views

Why is AES-128 considered secure while RSA needs a 1024-bit size to be considered secure [duplicate]

I got asked this question today and I didn't know the answer, AES-128 is considered secure, the key size is 2^128, so you would need in average 2^127 tries to break the key. Why does RSA need at least ...
0
votes
0answers
30 views

AES Twofish Serpent [duplicate]

AES-Twofish-Serpent how to create this combo encryption? I am using Linux Mint and i want to encrypt few big folders in one folder, but to be hiden.
1
vote
2answers
258 views

AES128 Decryption in Objective-C just slightly off

I have been asked to integrate a home-grown CRM system with a 3rd-party data service provider (DSP). The DSP has encrypted the information they are providing. I only have their decryption ...
3
votes
1answer
240 views

HW acceleration for Camellia cipher (x86_64/AES-NI/AVX2)

Modern processors support hardware acceleration for various crypto functions such as AES directly, or general vector operations which can be used in crypto ...
5
votes
1answer
96 views

How to convert AES to a PRNG in order to run NIST Statistical Test Suite?

I want to run statistical tests on my implementation of AES. How should I convert it into a PRNG? Is there a standard way to go about doing this? I could not find much information about this although ...
3
votes
1answer
84 views

Help with AES decryption with AES-NI Instructions

I am in process of implementing a AES 128 encryption in AVX2 assembly (using AES NI), and am having some problems with decryption logic. I have implemented the encryption sequence without any trouble. ...
0
votes
0answers
60 views

total effective key length of the AESX-192

If I have a AESX-192 be a block cipher which is similar to DESX but has the DES being replaced by AES and the AES key size is 192 bits. How should I compute the total effective key length of the ...
3
votes
1answer
49 views

What information should I send along with an AES ciphertext and is there any standard to do that?

While using some crypto implementations I got to see that many times a comment is added to the ciphertext. For example: ...
8
votes
1answer
120 views

Side channel security of HMAC in software

Assume we have a processor with a symmetric co-processor that supports AES. This processor does however not provide co-processor support for hash algorithms such as SHA-1 or SHA-256. I've got the ...
2
votes
0answers
33 views

Are collisions in AES-128 theoretically possible when the plaintext is the same? [duplicate]

Is it theoretically possible to find $P$, $K$, and $K^\prime$ such that $E_K(P) = E_{K^\prime}(P)$ where $E$ is AES-128 and $K \ne K^\prime$? I'd imagine this would be infeasible, but is it actually ...
1
vote
0answers
40 views

Compressing AES [duplicate]

I have this program which encrypts multiple files using AES then compress it using LZO into one single file. The problem is that the final file is almost equal in size than all the files which means ...
1
vote
1answer
140 views

AES key and block size

I am trying to understand $AES$ and I wondered what happens in the case of a $128$ bit block size and a $256$ bit key. All documents I read about $AES$ told me the key expansions algorithm for $128$ ...
3
votes
1answer
115 views

How to correctly encrypt data with proper authentication using AES-256-CBC in php?

I have been using the openssl function for encrypting data with AES-256-CBC in php. I have been able to encrypt it using an unique IV (by generating with openssl_random_pseudo_bytes)for each new ...
-3
votes
1answer
105 views

How to encrypt a number using AES?

How to do padding to input giving to encrypt using AES algorithm if the input is less than 128 bits? I need to encrypt a decimal number such as 10.
4
votes
2answers
196 views

Security of encrypting many short values with AES in GCM mode

We intend to encrypt certain values in a database which holds personal information such as addresses so as to prevent data leakage should the database be compromised. The intention is that each field ...
1
vote
0answers
20 views

If you use an AES key just once, do you need to use IV, and/or pad the message? [duplicate]

I am developing an application that is going to use AES encryption. Since it is going to use a different key for every message encrypted... Would it be secure to use a constant IV? (i.e null bytes) ...
3
votes
1answer
503 views

Should AES.decrypt(ct, wrong_key) return blank or wrong result?

I am trying to use AES as cipher for an application I am building. I am using a JavaScript library (https://code.google.com/p/crypto-js/) to perform encryption and decryption with AES. When I ...
2
votes
1answer
82 views

Which ciphers produce random ciphertext?

I already know AES produces a "random" output. 5e4e6440826d6afc4535fbf078455f791159701a9df624ddd4e4dda84523b6a7 Its ciphertext doesn't follow a pattern and is ...
3
votes
1answer
128 views

Practical attack on an impractical implementation of Rijndael (AES?)

My understanding of the cryptanalysis of AES, is based on what I've read on Wikipedia and my intuition, I have nothing but self-taught education on the subject. So I want you to imagine: I have only ...
1
vote
1answer
102 views

Encrypting and Authenticating The Simplex Communication Between Embedded Devices

I am planning to build temperature sensor nodes for my home heater control. Central device will control the heater using temperature data read by nodes. These nodes will send temperature data to ...