AES (Advanced Encryption Standard) is a symmetrical block-cipher algorithm with a 128-bit block size, and key sizes of 128, 192 or 256 bits.

learn more… | top users | synonyms

3
votes
1answer
68 views

Block Ciphers - Standardize plain text

I need to use AES-128 to encrypt a plain text about 720 bits. Is it correct to say that – in this case – the plain text will be divided in 5 blocks of 128, the result will be equal 640 bits, and the ...
4
votes
1answer
183 views

Implementing AES MixColumns with fewest XOR gates

I'm playing with Contiki (O.S. for constrained devices such as sensors and micro-controllers) and particularly with the AES encryption in software (the one available in Contiki source code). I'm ...
0
votes
0answers
98 views

Side channel attack on FPGA AES engine

I actually don't know if this is the right place where ask, but I try. The side channel attacks aren't a negligible problem. There are several ways to protect from these attacks its own IP inside the ...
5
votes
4answers
727 views

Which symmetric cipher is best for studying? [closed]

I would like to study a modern symmetric cipher (I have never studied a cipher before) and I was wondering which would be the best cipher for studying purposes of the following: AES (Rijndael), ...
0
votes
1answer
73 views

Encryption(AES) and verification per message

I want to send/receive messages with A (an peer) using TCP socket. I want to encrypt messages using AES CBC. Only I and A know a symmetric key K1 used in AES CBC, and K2 used in HMAC. The size of each ...
0
votes
3answers
113 views

How can complexity be increased or decreased in AES?

I have been studying data compression for a while. For educational purposes, after a lot of reading, I managed to create a software that performs encryption and authentication using AES256-GCM. ...
0
votes
2answers
63 views

Get AES key from client request

I get a request from a client who encrypts the message with the wrong AES key. Is there a way for me to know what AES key the client actually used? I understand I may get the decrypted msg which is ...
-1
votes
1answer
87 views

Safe way to generate different encrypted output from the “same” plaintext

Imagine I want to send imaginary defcon levels to another party over the internet. I know there are good protocols for this like SSL, but lets say I only have a blackbox tool where I can input an AES ...
2
votes
3answers
990 views

Is DES slow in hardware or only in software?

I have been reading that DES is slow. Is it only slow in software or slow overall? Also, as far as Triple DES being slow is concerned, is double AES with two 128 bit keys slower than single AES with ...
1
vote
1answer
147 views

Is it OK to encode data using key equal to data

For some project, I need to store some short string in encrypted form. It would be ideal for the current purposes to encrypt it using itself. ...
1
vote
0answers
109 views

Unicity Distance - AES

I am quite confused calculating the unicity distance and I was hoping that someone can clarify some things for me. My main issue comes from somewhat a difference of the calculation given by our ...
0
votes
1answer
144 views

computational complexity class of decryption of AES [closed]

I haven't really seen what computational complexity class of decryption of AES is. Can anyone provide reference papers or answers here?
1
vote
1answer
80 views

What is meant by - computational complexity $2^x$?

Recently Bi-clique Cryptanalysis allowed to obtain following results on full AES ES that claim to have The first key recovery attack on the full AES-128 with computational complexity $2^{126.1}$ The ...
3
votes
2answers
126 views

Is it OK to use a hash of the key as nonce for AES GCM?

I don't see an immediate risk of using the hash of the key as the nonce for AES GCM. Is there something I could be overlooking?
0
votes
2answers
1k views

AES-CTR in BouncyCastle with string key, without IV or salt [closed]

Our team is encrypting data using a javascript snippet. My problem is I'm supposed to parse them back in my Java code. I am having troubles identifying parts of the algorithm. The code says it's CTR ...
0
votes
1answer
427 views

How was the MDS matrix used in AES chosen?

$$\begin{pmatrix}2&3&1&1\\ 1&2&3&1\\ 1&1&2&3\\ 3&1&1&2\end{pmatrix}$$ In the above MDS matrix used in AES encryption, why are the numbers $2$,$3$ and $1$...
0
votes
1answer
261 views

Why using AES in ECB (Electronic Code Book) mode a bad idea? [duplicate]

Why using AES in ECB (Electronic Code Book) mode a bad idea? is CTR mode better? Given only these two can be used for parallelization.
1
vote
1answer
213 views

Can AES in CBC mode be parallelized?

Is there any way to parallelize AES running in CBC mode? (The plan is to parallelize it using OpenMP)
0
votes
1answer
77 views

Authenticating small packets

I intend to authenticate small packets of data, between 16 and 256 bytes each. For some of them encryption will also be required. This will be used on small micro controllers, with RAM sizes ranging ...
1
vote
2answers
185 views

Can AES be considered as Perfectly Secure?

I am studying about the AES encryption standard, and as I know from the theory there is no known weaknesses today about this block-cipher. I would like to find out or at least to understand what "...
1
vote
4answers
814 views

Why don’t all AES encryption tools produce the same key from the same password?

Alice and Bob meet regularly. They have agreed face-to-face a 128 bit password which they want use to encrypt/decrypt emails written between them. They decide to use 256-bit AES. Alice wrote her ...
7
votes
2answers
357 views

What does a stream cipher provide that cannot be obtained with AES CTR mode operation?

I can precompute the key stream for the CTR mode operation and the encryption at that point is similar to a stream cipher. So why are there stream ciphers still used and proposed after RC4? Recently ...
2
votes
1answer
401 views

How many bits of entropy can I expect from /dev/urandom in iOS?

Apple's latest security documentation indicates that it now uses CTR_DRBG for generating pseudo-random numbers (previously Yarrow instead of CTR_DRBG), using "timing variations during boot" and "...
2
votes
1answer
102 views

Are pseudorandom permutation really permutation in mathematical sense?

In security, and specifically Block Cipher (AES, DES, etc), when we talk about pseudo random permutations, is the term "permutation" refer to the same meaning as in discrete mathematics. That is, the ...
2
votes
2answers
267 views

Post-quantum authenticated encryption

It is well-known that the Grover's algorithm reduces cryptographic strength of symmetric ciphers to a square-root - e.g. AES-256 becomes only 2128 strong. However, these statements are always made ...
1
vote
1answer
110 views

AES process candidates implementations and usages

There were fifteen candidates in the AES selection and I suppose that Rijndael wasn't the single good algorithm. I know that Camellia is an evolution of E2 candidate and can be used as symetric ...
0
votes
2answers
213 views

DH with AES - is that an acceptable security scheme over UPnP?

I'm trying to devise a good security scheme to protect comms over Wi-Fi. Right now, I have 2 devices that already communicate via UPnP but I need to secure this communication. I've come up with this: ...
0
votes
1answer
78 views

Segmenting encryption to get the same results with the same key

The given examples below are dummy and in English. They are mainly for place holding as this is a concept question rather specific example based Given AES has a block size of 128 bit (16 letters of ...
1
vote
1answer
217 views

How openssl padding for AES cfb IV?

From a few documents I have read and a few questions about padding here, I think if I passed a encrypted text fewer than BLOCK SIZE, openssl would pad it per PKCS7. And use that padded encrypted text ...
0
votes
1answer
334 views

Where can I learn the basics of AES?

I was tasked with making an expo about AES and its steps, but I still can't grasp it, especially when it comes to "key schedule". Does anyone know some good material to start learning? Or can someone ...
1
vote
1answer
223 views

CLEFIA vs AES 128-bit

I am running a comparison between CLEFIA(Lightweight cipher from Sony Corporation which is a standard now http://www.sony.net/Products/cryptography/clefia/standard/index.html) and AES 128-bit. The ...
1
vote
2answers
178 views

Can I use the output from a DRBG directly as K for AES, or do I need to use a key generator algorithm?

NIST has 3 validated "Recommendation for Random Number Generation Using Deterministic Random Bit Generators" (DRBG's) that are based on NIST SP 800-90A: Hash_DRBG (based on hash functions) ...
3
votes
1answer
363 views

Where is the authentication tag stored in file encrypted using AES-GCM?

So I am using cryptopp to encrypt a file in a project and I am using AES-GCM. I have a 256bit key and a 128bit ivec and a 128bit tag that I use to encrypt files. However, I want to know where the ...
2
votes
1answer
106 views

How to generate the APA SBox?

I am trying to generate the S-Box provided in the Affine Power Affine paper (PDF) but I'm not sure I understand it fully. The essence of the paper is this: ...
0
votes
1answer
80 views

SSL certificate / SSL configuration - FIPS-197 compliance

What does it mean when we talk about FIPS-197 compliance in the context of SSL certificates, their deployment and usage ? I am almost certain that the FIPS-197 compliance in the context of SSL ...
0
votes
0answers
104 views

side channel attacks against TDES (compared to AES)

We all know AES has some pretty strong side channel attacks, some where (with a couple of hundred know plain- and ciphertext combinations) a key can be derived in a matter of minutes. Others may take ...
1
vote
2answers
90 views

Is a padding oracle attack possible if data is only encrypted internally on a server (e.g. for storage)?

I read something about the padding oracle attack when analysing the use of an AES-encryption of data in a database and was "scared" it could be a serious issue. But after investigating a bit further, ...
0
votes
2answers
90 views

How is the MAC or HMAC secret shared with the other party for verification?

I've seen people everywhere say to use a MAC or HMAC with block ciphers. I think I understand the basics, but I'm still not sure how the HMAC secret is distributed so the other party can verify that ...
0
votes
1answer
275 views

Multiple AES/ECB encryptions of different data with same key all end with same pattern

We have used "AES/ECB/PKCS5Padding" with a 256 bit key. We encrypt different streams of data (blockwise) with the same key. Each encrypted stream ends with same pattern. What is the reason for this?
3
votes
2answers
1k views

nonce of AES-GCM in SSL

It seems that the nonce of AES-GCM in SSL has 3 parts: salt, 4 bytes, generated in handshake, not changed in whole session nonce_explicit, 8 bytes, chosen by the sender and carried in each SSL ...
0
votes
0answers
29 views

AES-XTS: find key from ciphertext and plaintext [duplicate]

Let's say I have a plaintext, the corresponding ciphertext encrypted using AES-XTS, and the initialization vectors. Is there any way - not brute force, of course - to compute the key? Even if there's ...
0
votes
1answer
526 views

AES Mix Columns and Shift Rows

Why we use Mix Columns and Shift Rows in AES? FOr example, if i want implement an AES algorithm without Mix Columns and Shift Rows what is the difference in the ciphertext?
0
votes
1answer
871 views

What do I use as the encryption key and initialization vector in AES cfb128

I'm writing a program that can encrypt a file using AES cfb128 (using Openssl and C++). The scenario of the program is this: Person A visits computer, encrypts a file they make, takes away a key (...
0
votes
1answer
84 views

AES inversion operation in sub byes

I was wondering why in the AES sub-bytes operation one can represent the inversion as computing $x^{254}$. What is the reason for this? Moreoever, I was wondering what the text on page 212 of https://...
0
votes
1answer
352 views

Affine transformation in AES: Matrix representation

I know that the affine transformation of the AES can be represented both as a polynomial evaluation over $\operatorname{GF}(2^8)$ and as a matrix-vector multiplication (see, e.g., p.212 C.4 of The ...
1
vote
3answers
836 views

Decrypt AES-encrypted data with another key

Here is a plain question, all filled with pseudo-real data :) We have a string: "hello" and two keys for AES: GoodKey and BadKey. We encrypt our string with GoodKey, and receive something like "...
3
votes
1answer
102 views

Device intercommunication with commands

I want to create a smart house project, and in that I bought some simple RF modules. Those modules don't support crypto out of the box but I want to connect them to a device that I would program to ...
4
votes
1answer
211 views

Can Poly1305-AES be used with AES-256?

I'm reading through Bernstein's The Poly1305-AES message-authentication code. The MAC is predicated on 16-byte block ciphers like AES and produces 16-byte authentication tags. However, Bernstein does ...
0
votes
0answers
39 views

AES product function

Small description: consider a polynomial in GF($2^8$) , which has the form $$f(x) = b_7x^7 + b6x^6 + b_{5}x^5 + b_4x^4 + b_3x^3 + b_2x^2 + b_1x + b_0 $$ If we multiply by x , we have $$x * f(x) = ...
2
votes
1answer
364 views

About the Security of PCBC Encryption Mode

We are designing an encrypted file system. We plan to use the PCBC (Plaintext Cipher Block Chaining) encryption mode for encryption. This is because we desire the feature ("small changes in the ...