Combination of encryption and authentication in a way that ensures confidentiality and integrity.

learn more… | top users | synonyms

4
votes
1answer
70 views

Security of this scheme

I am developing a software and I am not sure if it is completely secure. I have 22 Mb of data to encrypt used multiple times, random IV (generated using RAND_bytes from OpenSSL lib) and password ...
4
votes
1answer
215 views

Combining AEAD with RSA

'Hybrid' encryption, where we combine symmetric encryption with public-key cryptography, is pretty 'tried and tested'. To summarise, we generate a symmetric key and encrypt it using RSA. We would ...
4
votes
1answer
497 views

Using a derived key for CMAC

Consider the following authenticate-and-encrypt scheme that uses AES-128 in CBC mode for encryption and AES-128 - based CMAC for authentication: Two keys are derived from the master key k (16 byte): ...
4
votes
1answer
1k views

Is this authenticated one-way communication protocol secure?

I am looking to see if this one-way communication protocol is secure. Assume Alice wants to send Bob a message (and doesn't need Bob to reply in the same session/channel - think email). Bob knows ...
4
votes
1answer
63 views

Should the signature be prefix or postfix to the message in the sign-then-encrypt scheme?

Let's assume we have a message $M$ and it's signature $S$ and that $|$ is the concatenation operator. Should we encrypt $S|M$ or $M|S$? Does it even matter?
4
votes
2answers
208 views

Why must we generate the signature before any compression being done at PGP?

I have done some research on PGP and I found out there are of two reasons why we must generate the signature before doing any compression. Yet, I am not sure I really understand them both. One ...
4
votes
0answers
47 views

Are there any test vectors for the CMS content type AuthEnvelopedData (for AES-GCM)?

I am looking for CMS AuthEnvelopedData test vectors for AES-GCM mode. I haven’t seen any ready-to-use test vectors for it. There are test vectors for AES-GCM mode but not for its CMS support. I even ...
4
votes
0answers
96 views

Can convergent encryption be turned into deterministic authenticated encryption with HMAC?

If you take a convergent encryption algorithm and replace the hash $H$ used to derive the key with HMAC-H, keyed with a secret key $k'$, does the resulting algorithm provide you with deterministic ...
3
votes
4answers
1k views

Tamper-proofing log files

Problem Overview I want to securely store log files so the contents are secret, and they can't be modified without detection. The files will be encrypted using authenticated encryption (AES in GCM ...
3
votes
1answer
658 views

What are the potential security impacts of using CRAM-MD5 for Emails, when not using an SSL connection?

Background: My current server-provider tells me it's no problem to store the passwords in plain-text in the database, saying he has to do so because they use CRAM-MD5 for email authentication. But ...
3
votes
1answer
247 views

Difference between lightweight, online and low memory Authenticated Encryption schemes

What is the basic difference between the following types of Authenticated Encryption (AE) schemes? Lightweight Authenticated encryption Online Authenticated Encryption Authenticated Encryption for ...
3
votes
3answers
270 views

Does ECIES imply authenticity?

Assume: Alice and Bob both generate separate EC keypairs Alice obtains Bob's public key, and together with her private key creates a shared secret key Alice encrypts a message using the shared key ...
3
votes
2answers
116 views

Can we build authenticated encryption using Feistel Networks?

Most of the encryption modes of Feistel Networks especially the ones used to build fixed length block ciphers just provide confidentiality . Can we build authenticated encryption using Feistel ...
3
votes
2answers
177 views

CBC-MAC key can be added to ciphertext?

I use AES both CBC and CBC-MAC to encrypt some stuff. I generate one key for CBC and one different key for CBC-MAC. Does the second key (for CBC-MAC) need to be secret? How to join such key with the ...
3
votes
1answer
1k views

AES CCM vs CCMP

Are the terms AES CCM and AES CCMP are equivalent, or is there any technical differences between the two?
3
votes
1answer
48 views

Are deployed MACs IND-CPA?

There are a number of message authentication codes (MACs) used in practice. They are highly used in practice (f.ex. in TLS), but there's (at least) one application where they can't be used: Full Disk ...
3
votes
2answers
491 views

Does CCA security imply authenticated encryption?

Does CCA security imply authenticated encryption?
3
votes
1answer
216 views

When is it safe to not use authenticated encryption?

I have read the post Why should I use Authenticated Encryption instead of just encryption? When is it safe to not use authenticated encryption? I assumed hard drive volume encryption or per file ...
3
votes
1answer
94 views

Encrypt-then-authenticate variant used in IPsec

I am trying to understand the variant of Encrypt-then-Authenticate (EtA) that is used in IPsec. For this I have looked at this chapter. What I got so far is that the integrity and confidentiality ...
3
votes
1answer
71 views

How do I tack on “additional data” to libsodium's public-key authenticated encryption?

I note that libsodium provides AEAD when using symmetric cryptography. And yet, under section 8 (Public-key cryptography) there are no public-key methods described which allow for additional data ...
3
votes
1answer
89 views

Compression step of PGP

We do compression in PGP. Does this step increase/decrease or either have any effect regarding the authentication of a message?
3
votes
1answer
899 views

Difference entity authentication and implicit key authentication

From the Handbook of Applied Cryptography, in discussions of key sharing algorithms, I see definitions: Implicit key authentication is when one party is assured that no other aside from a ...
3
votes
1answer
286 views

efficient authentication with broadcast encryption?

(I am not a crypto expert, so I apologize if the terminology I use is incorrect.) Suppose I have the following simple broadcast encryption scheme for securely sending content to $n$ authorized ...
3
votes
1answer
194 views

What “Tag Length” should be used for the EAX MAC?

Since EAX is very flexible with regard to the length of the calculated MAC (what they call "tag" is the MAC value right?), and the EAX paper as well as other documentations carefully avoid suggesting ...
3
votes
1answer
32 views

Is it okay to send an encrypted key using XSalsa20-Poly1305, and send subsequent messages using ChaCha20-Poly1305?

I am looking at a cryptographic protocol in a somewhat unusual environment: the communicating parties can share arbitrarily long secret keys over a secure channel. If forward secrecy is not required, ...
3
votes
2answers
48 views

Is the security of an HMAC equally important as the security of the cipher itself?

I'm a little unclear on how hash based MAC works... So I would like to know, is the security of your hash function as important as the security of the overall cipher? Basically, if you can crack the ...
3
votes
1answer
65 views

Is authenticated encryption basically a lockable box?

I recently used a custom construction as a commitment scheme, which was taken from the standard picture you give people while explaining commitment schemes. Basically commitment schemes can be ...
3
votes
2answers
100 views

Does authenticated encryption add any protection to a signed digital envelope?

The general scenario of hybrid encryption is to use public key cryptography for the exchange of a one time session key that can be used for the encryption of the plaintext with a symmetric encryption ...
3
votes
1answer
90 views

How to enforce data privacy, integrity and authenticity of distributed firmware images for an embedded device?

I'm developing a bootloader for an embedded device, with which it should be possible for customers (i.e. device owners) to update the device's firmware. It is required that: the firmware is ...
3
votes
1answer
121 views

EAX cipher mode with nonce equal header

I am using EAX AEAD with an 8-byte message header which carries a 32-bit sequence number, a message length, and some other bits that I don't mind exposing. Assuming the sequence number never repeats ...
3
votes
2answers
173 views

Can a secret message be securely transmitted within a MAC tag?

A sender wants to transmit an ultra secret code $M$ which could be either 'go', 'stop' or 'wait'. This could be any selection of code words really and adopted for any use such as transmitting short ...
3
votes
1answer
104 views

Managing data access through asymmetric cryptography

I want to manage authorization, as 3rd-party permissions, through asymmetric cryptography. I'm concerned about how it is possible to share access of encrypted data with N entities, be able to revoke ...
3
votes
1answer
90 views

The exact definition of a symmetric encryption

I have doubts for the definition of the decryption algorithm $D(.)$. I think I've already seen that the decryption returns a plaintext $M$ on input the key $K$ and $C=E_K(M)$. I have also seen thet ...
3
votes
1answer
294 views

Is this an acceptable authenticated encryption?

After much deliberation, I've decided to use a normal Encrypt-then-MAC scheme instead of an authenticated encryption mode such as GCM as authenticated encryption primitive. This is due to the lack of ...
3
votes
0answers
16 views

StoredKey in Salted Challenge Response Mechanism (SCRAM)

In SCRAM (RFC5802, page 8) the client generates ClientKey to server, which is a derivation of the original password. This is communicated to the server in a secure ...
3
votes
0answers
25 views

Authenticate encrypted seed for KEM + AEAD hybrid cryptosystem

Say I want to encrypt something using RSA / KEM and an authenticated cipher. I encrypt using the following scheme: generate random seed z using ...
3
votes
0answers
165 views

Design requirements for a keyed hash function?

I am actually preparing for a cryptography exam, and I found a question asked by the professor in the class, below are the lines that I copied from the slide : Example: Let $Ek$ be the encryption ...
2
votes
3answers
455 views

Can ECB mode really leak some characters?

In an Ars Technica article about Adobe's use of 3DES in ECB mode, there's a paragraph The passwords, according to password expert Steve "Sc00bz" Thomas, are encrypted in a mode known as ECB. That ...
2
votes
2answers
306 views

Why is MAC using nonce+message+hash(nonce+message+identifier) not the standard?

Given that we know that nonce + message + hash(nonce + message + mac-key) all inside the encryption makes it possible to detect if any bits of the message have been ...
2
votes
2answers
212 views

secure embedded/microcontroller crypto using AES-ctr with hmac-sha2

The embedded device is a low-power 8-bit microcontroller (memory usage is constrained to about 10kb code, 1kb ram). As the device is battery-powered and manual service should be minimal, more powerful ...
2
votes
3answers
244 views

Encrypt-then-MAC: full random keys or keys derived from master key?

I have this scenario where I use Encrypt-then-MAC (AES256-CBC and HMAC-SHA256) with keys generated by a CSPRNG (specifically, SecureRandom in Java). I'd like to know which is better: Use the CSPRNG ...
2
votes
1answer
477 views

How is padding oracle attack mitigated by encrypt-then-MAC?

Let us suppose Alice sends a message to Bob. As far as I know, the most popular scheme of MAC-then-encrypt is as follows: Alice computes the HMAC of the plaintext using her private key, and then ...
2
votes
2answers
224 views

Is there a point using GCM block chiper with Authenticated DH?

I'm delivering shared secret with DH exchange, using a static key for signing and an ephemeral for session, so is there a point using GCM for encrypting the data, or is a simple CBC/CTR block cipher ...
2
votes
1answer
322 views

Does SpongeWrap (from the Keccak team) absorb ciphertext or plaintext?

I have been reading the Cryptographic sponge functions paper, but I'm still confused. Does Keccak in authenticated encryption mode absorb ciphertext or plaintext? Edit: Are there any test vectors to ...
2
votes
1answer
458 views

Encrypt-then-MAC paradigm

I read that the Encrypt-then-MAC paradigm is provably secure. From what I understand, when using for example AES for encryption and HMAC_SHA256 for MAC generation (and the keys $K_1 \neq K_2$), this ...
2
votes
1answer
177 views

ID-Secret Scheme

I have an ID-Secret scheme and I'd like to hear if there are any vulnerabilities present. Party 1 and Party 2 hold some credentials, an ID and a Secret. Party 1 Creates this message: ...
2
votes
1answer
36 views

PBEWithMD5AndDES Cipher does not check for integrity first?

I am running FindBugs with findsecbugs plugin to scan java code for security issues. I am getting "Cipher With No Integrity" error for a Cipher function implemented with "PBEWithMD5AndDES". The legend ...
2
votes
1answer
119 views

Format preserving encryption FFX

In FFX mode the format of the ciphertext is same as plaintext. How does it ensure data integrity and authentication? Is there any bit flip attack in FFX mode? Is it malleable?
2
votes
1answer
252 views

Flaw in the security definition of *Stateful* Authenticated Encryption?

I'm in search of the correct definition of a stateful authenticated encryption scheme (sAE), and its related security notion. This has been treated several times in the academic literature, however, ...
2
votes
1answer
261 views

The security of an encrypt-and-MAC

I would like to know what is the security of an encrypt-and-MAC with different keys for each transaction For example: the one-time-pad with $k_1$ and the HMAC with $k_2$ $$C = M \oplus k_1\\ MAC = ...