Authentication is successfully validating that an entity you are communicating with is actually who they claim to be. The entity typically demonstrates who they are by showing they possess a secret that only they could know.

learn more… | top users | synonyms

2
votes
0answers
91 views

Is this a valid real-time authentication scheme?

The scenario in Alice/Bob/Cindy terms: Alice approaches someone she doesn't know, but thinks is Bob, and asks for some secret information. Bob doesn't know and doesn't trust Alice, but Alice says she ...
4
votes
6answers
469 views

Is there an authenticated encryption scheme where the recipient can attribute the message to a single sender?

With a standard authenticated encryption scheme (or MAC), Alice and Bob share a symmetric key. When Alice sends something to Bob, Bob can check that it is authentic. At that point, Bob can deduce ...
2
votes
0answers
120 views

Computer appliance protocol

I build the computer appliance system that consist of software server and multiple controllers. The system I want to build must be pluggable in the sense that when I connect a controller C to the ...
4
votes
1answer
118 views

What authentication techniques can be used by QKD Systems?

As it is well known that QKD systems are prone to simple MITM attacks… what authentication techniques are being used in QKD to prevent those attacks in practice?
2
votes
2answers
109 views

When is each key used when encrypting an email using OpenPGP?

When you send an email using PGP to encrypt emails, is the recipients public key used to encrypt the email, or is your private key used? Are they both used? At what points do each of the four keys ...
2
votes
1answer
222 views

Is it considered insecure in an HOTP implementation to publicly provide the next counter?

I am working on a project that needs to securely authenticating one or more smartphone clients with a server running on a microcontroller so it has very limited resources. I have found plenty of ...
2
votes
1answer
287 views

implications of SSH server key compromission when authenticating users against a public key

Friday we had a disagreement with a colleague of mine about the implications of SSH server key compromission The question was stated as this : What could a hacker do while provided with the SSH ...
1
vote
0answers
181 views

Is TOTP or a timestamp encryption a better timestamp-based authentication token system?

Are there advantages to using TOTP over encrypting a timestamp with a shared secret, in cases where the readability or ease of typing the token are not important?
7
votes
2answers
2k views

Is there a way to make RC4 (ARCFOUR) secure, or is it completely broken?

I need a method to authenticate a process with another in order to establish interprocess communication between them, to prevent malicious processes from trying to hook onto the system. Currently I ...
2
votes
1answer
307 views

Is there another resource for Carter-Wegman-style message authentication?

I'm wondering if there are other resources that cover Carter-Wegman style message authentication, besides the sources themselves. Is there an online text or a book that covers their ideas? I'd ...
4
votes
3answers
550 views

Can I use PBKDF2 for authentication and decryption?

I want to store a hash for authenticating a password. I also want to use the same password for decryption. Can I use PBKDF2 for both? (I plan to use different salts for the authentication and the ...
6
votes
1answer
363 views

Why does SRP-6a use k = H(N, g) instead of the k = 3 in SRP-6?

I've been reading up on the Secure Remote Pasword protocol (SRP). There are a couple different versions of the protocol (the original published version being designated SRP-3, with two subsequent ...
7
votes
3answers
764 views

Is this a secure implementation of password reset email?

I am redesigning a password reset email mechanism because the existing implementation scares the hell out of me. My goal is to generate reset codes that are: Expired Tamper Resistant Single Use ...
11
votes
2answers
8k views

Signatures: RSA compared to ECDSA

I'm signing very small messages using RSA, and the signature and public key are added to every message, which requires a lot of space compared to the actual content. I'm considering switching to ...
2
votes
2answers
111 views

KDF with low-entropy salts

I need to derive a key from a username and a password. These are the only two things I have access to. What I thought is using PBKDF2 with username as the salt and password as the master password. ...
1
vote
0answers
126 views

Setting protocol parameters to achieve concrete security

Background One issue with modern security proofs is that they are usually asymptotic. In other words, such proofs are usually formulated as follows: For any polynomial-time adversary $\mathcal A$, we ...
6
votes
4answers
1k views

How can I validate a hashed password if all I have is another hash?

The Scenario I have a client-side web application that bounces requests against a server-side API. For the sake of simplicity, every request must pass a username and password. This is similar to ...
4
votes
2answers
514 views

How did LinkedIn “salt” all their passwords?

First, just to make sure I understand "salting" correctly: You randomly generate a string to append to the password before hashing it, so as to increase its length and make precomputed tables much ...
5
votes
2answers
2k views

What are advantages of using a HMAC over RSA with SHA-1 hashes?

I am currently studying for an exam and this was a previous question: Give one advantage of using HMACs over using RSA to sign SHA-1 hashes. My thoughts are that it has something to do with the ...
4
votes
1answer
651 views

Efficient and stateless anti-forgery method

One use of an anti-forgery token is to prevent Cross-Site Request Forgery (CSRF) attacks. The attacker doesn't need to sniff the wire in order to carry out a CSRF attack. This attack relays on the ...
7
votes
1answer
282 views

Is there any known malleability of scrypt outputs?

The scenario is single-use passphrase-based non-interactive message authentication. The obvious try to do this is to chose a random salt of the appropriate length and send: ...
6
votes
3answers
501 views

How to authenticate over open channel?

I am making an arduino project to open my garage door. I want to make it so users with the passphrase can open the door. Due to computational restrictions it is unlikely encryption is possible. ...
8
votes
3answers
13k views

RSA encryption with private key and decryption with a public key

When using the RSA cryptosystem, does it still work if you instead encrypt with the private key and decrypt with the public key? What about in the case of using RSA for sender authentication?
2
votes
2answers
328 views

How to generate successive stream-cipher keys?

I've identified a weakness in a distributed simulation system I'm looking at, and I'm looking for some advice on how to fix it. Clients initially negotiate an authentication token with a login server ...
4
votes
2answers
351 views

X.509 CSR: Why does CA remove signature?

I just read this article on Wikipedia: Certificate Signing Request I'm not a PKI or Crypto expert. As I understand, a CSR (certification request) is always signed by the PKCS#10-Request creator. ...
4
votes
1answer
1k views

What is “Implicit Authentication”?

What is “Implicit Authentication” in the context of authentication methods? I searched the Web but could not find any article that describes this. If anyone can describe it, that would be a great ...
3
votes
2answers
157 views

Helper data authentication in PUFs

As I understand, PUFs work by using two procedures: generation and reproduction. Generation reads a value $w$ from a fuzzy source and generates a key $R$ and helper data $P$. Then, in the reproduction ...
1
vote
1answer
134 views

How is the password sent across for verification?

I am familiar with Challenge-Response Authentication scheme. However I would like to know actual message content sent between client and server for 1 way authentication, over an insecure channel. ...
5
votes
2answers
941 views

RSA-based authentication and key-agreement protocol

An authentication and key-agreement protocol between devices shall mutually demonstrate their identity, and establish a shared random secret $R$ suitable for securing later communications. To that ...
5
votes
1answer
282 views

Why are the random exponents so much bigger in the Socialist Millionaire protocol versus Diffie-Hellman key exchange?

Section 8, Security considerations, of RFC3526, which defines groups used for Diffie-Hellman has a table recommending some random exponent sizes. In particular, it says: The strength of a key ...
2
votes
1answer
477 views

Hash or encryption function for challenge-response protocol?

Say I have an authentication protocol where the shared secret is never transmitted. The server passes a challenge to the client and the client calculates a response using an algorithm where the ...
5
votes
1answer
690 views

What is the proper way to use a client nonce?

I've implemented an API for one of my clients, it relies on nonces and a shared secret. The structure: Client's Site (CS) requests nonce from My App (MA), posting their username MA verifies the ...
1
vote
3answers
303 views

How does one provide a secure and authentic communication channel?

Let assume two participants Alice and Bob who perform a given protocol which is a sequence of messages exchange between them. My question is: How can I provide a secure and authentic communication ...
5
votes
1answer
1k views

How can I encrypt + authenticate short strings into similar short ciphertexts?

I wish to manipulate short ASCII strings (namely unpredictable domain names) into a form which cryptographically assures authenticity and confidentiality, for use in the local part of email addresses. ...
2
votes
1answer
155 views

Signature scheme with two private keys, neither derivable from the other

Is there any scheme, ideally one widely used or at least widely available, where you can treat both the signing and verifying keys as secret? Basically, the functionality I'm looking for is this: ...
4
votes
1answer
510 views

Need an introduction to SPKI (or “SPKI for dummies”)

I am familiar with concepts such as the following: PKI and CAs ID based cryptography Certificateless cryptography PGP web of trust more or less anything in basic Crypto that is taught in a college ...
7
votes
2answers
2k views

What advantage does facebook's new encrypted access_token have?

When a user on facebook grants an app access to their account, an API key is issued to the app. This key is app and user-specific. This process is described in Facebook's developer documentation. ...
6
votes
3answers
2k views

SHA1 usage for passwords, alternatives and advantages?

My application can authenticate via openid and oauth (facebook, twitter, etc) and also with its own authentication system. I previously switched hashing from MD5 to SHA1 and during migration I had to ...
2
votes
1answer
132 views

How to collect, process, and transmit data securely?

In my question "Authenticating data generated by a particular build of an open source program", Dave Cary requested that I post a question stating my real problem on a high level rather than the ...
5
votes
4answers
165 views

Authenticating data generated by a particular build of an open source program

[I was torn between posting here or security.stackexchange.com. In the end, I felt that this was more of a design question, rather than an implementation question and so chose this forum.] My ...
3
votes
2answers
136 views

What is sent on the initial communication with Kerberos?

When a user wants to communicate with another user (let's say Alice and Bob), what is sent over the network during the initial communication? Alice uses her Kerberos client and enters her password ...
3
votes
3answers
582 views

Is public-key cryptography the only option in this scenario?

Two parties: a client and a server are to a agree on a symmetric key. Both the client and the server are aware of a master password. The way this is currently done ...
8
votes
2answers
821 views

How should I store passwords that need to be available in plain text?

Suppose I need to store login information for a third-party website for a few users, how would I go about doing it? Since I am logging into a third party website, I need the password in plain-text, ...
19
votes
6answers
311 views

advances in usability for cryptography/authentication

I'm wondering if there have been any recent advances (say, the past 5-10 years) in human usability for cryptography and/or authentication? By that I mean something that makes it easier for an ...