ECDSA is a signature algorithm. It is the elliptic curve (EC) implementation of the digital signature algorithm (DSA).

learn more… | top users | synonyms

2
votes
1answer
324 views

How to properly add ECDSA private keys?

I'm currently working on an application that requires me to add two ECDSA private keys in order to make a new private key. The result has to have the property, that its corresponding public key is the ...
2
votes
1answer
234 views

Can A PRNG Be Used To Generate Multiple Private Keys for ECDSA?

Suppose Alice seeds a cryptographically strong Pseudo Random Number Generator with a truly random number, and keeps it secret. Alice then uses the output of the PRNG to generate several 256-bit ...
2
votes
1answer
363 views

Is using Ed25519 parameters in ECDSA safe?

I recently discovered the Curve25519 key exchange lib and the Ed25519 signature lib. Due to the speculations about NIST-designed curves, there is a chance that I ditch them and use the curves above ...
2
votes
1answer
140 views

Verify Messages to Embedded Device

I'm building an embedded device that I plan on distributing. Periodically the device will poll my server to check for updates and commands. I'd like the device to verify that any messages(JSON strings ...
2
votes
1answer
57 views

ECDSA signature verifiable 1-way transformations

Alice signs a message $m$ with her private key, yielding a signature ($r$,$s$). I want to prove to someone else that I have this signature, but I don't want them to have the knowledge of what ...
2
votes
1answer
825 views

Where can I find Secp256k1 ECDSA test vectors?

I`m currently implementing an ECDSA library based on curves like secp256k1. I would like to test it using some test vectors, like ...
2
votes
1answer
65 views

Encoding a message to a point of curve y^2=x^3+7 and Bitcoin Core

Where should I look at in Bitcoin Core source code to figure out how the signature process trasform a message in a curve point? To sign a transaction (message) in Bitcoin system, you need to encode ...
2
votes
0answers
272 views

Elliptic Curve based blind signature implementation

I want to use Elliptic Curve based blind signature scheme for my research. There is no proper implementation of ECC-based blind signatures. Can someone describe to me which things I need to follow ...
2
votes
0answers
174 views

Sane implementations of Bitcoin cryptography routines w.r.t. side-channel attacks

Bitcoin uses SHA-256, Base58Check, ECDSA (Sep256k1) and RIPEMD-160 as the basis of its encryption (see this article for a short guide on how addresses are created). I would like to create an ...
1
vote
2answers
177 views

Is there a problem with this non-ECDSA message signing?

Is there a problem with signing a message like this? ...
1
vote
2answers
197 views

Elliptic curve brute forcing

I have elliptic curve of equation $y^2 \equiv x^3 -x $. And the coordinate of points $Q$ and $P$. I want to solve $Q=[k]P$ (where $k$ is the unknown) by testing all possible $k$. Is this the right ...
1
vote
1answer
48 views

The difference in size between ECDSA output and hash size

So if I use secp256k1 for example, I've got my key size of 256 bit, and say I sign a SHA256 hash of a message, with size 256 bit, I get an output of size 512bit. Why is there a difference between the ...
1
vote
1answer
109 views

Are there signatures that don't have subliminal channels?

Are there signatures that don't have subliminal channels and also don't require commitments or zero-knowledge proofs? DSA or Shorr signatures need a nonce which can leak valuable information. There ...
1
vote
2answers
348 views

DSA, RSA, ECDSA etc - which one is cheapest for signing?

For a protocol where the server presents its signature to prove authenticity (e.g. IKE/SIGMA/STS with only one party authenticated), it's essential that the signing is extremely cheap, while ...
1
vote
2answers
84 views

ECDSA Public key randomness

If I have a 256bit ECDSA public key how likely is it that the same public key will be generated by another person. Will it take on average 2^256 tries to generate same public key? If I xor the first ...
1
vote
1answer
192 views

ECDSA Public Key generation

Referring to both Wikipedia page and ECDSA-cert paper I can understand that, given $\mathcal{E} = \mathcal{E}(a,\,b,\,\mathbb{F}_{2^m})$ as our elliptic curve on $\mathbb{F}_{2^m}$ group $G \in ...
1
vote
1answer
742 views

Signature algorithm SHA 1-2 with ECDSA

Can someone please explain what key sizes are required for the ECDSA algorithm? I tried a 128 bit EC Key for SHA1withECDSA and it throws an error. However with 256 bit key I could run the algorithm. ...
1
vote
1answer
265 views

Can Secp 256 K1 curves “map” to a value on FIPS 186-3 or P-256?

I'm looking at Secp 256K1 vs UProve's FIPS 186-3 or P-256 implementation. Is there any relationship between the curves such that I can consistently "map" or "project" values from one curve to ...
1
vote
1answer
416 views

Is there a method to break an EC curve for all key-pairs (Q,d) such that (Q=d*G) faster than breaking every single key-pair?

Related to this question: Is there any memory trade-off that helps such attack? Obviously if the field size is very small (say 40 bits) it´s possible, but what if the field size is 160 bits long? or ...
1
vote
0answers
68 views

BER or DER X9.62 ECDSA signature

The signature format for ECDSA signatures can be encoded using ASN.1 integers according to X9.62 or it can comprise of two integers with the same size as the key size. In case the X9.62 format is ...
1
vote
0answers
197 views

Is this a secure (and correct) sign-then-encrypt technique for transferring messages?

After reading some information on the way iMessage works I have been working on writing some code to try my hand at securely transferring messages in a similar manner and I wanted to confirm that the ...
1
vote
0answers
168 views

Where can I find examples of ECC implemented in VHDL?

I am looking into implementing ECDSA signature and ECDH key agreement in a Xilinx FPGA. All the examples I have found of VHDL implementations skip over how to construct the low level ECC primitives ...
0
votes
1answer
119 views

ECDSA for encryption

ECDSA keys are much shorter than RSA keys, but typically only used for signing, not encryption. Is there an accepted way of doing this? (https://bitcointalk.org/index.php?topic=196378.0 ...
0
votes
1answer
78 views

How to calculate kinv from the given k value

I am implementing an ECDSA NIST test vectors verification application. The test vectors are taken from http://csrc.nist.gov/groups/STM/cavp/#09. One of the test vectors is given below: ...
0
votes
1answer
2k views

ECC key size and signature size

My understanding of ECDSA signature length is that it depends on the key size. So for instance, if a "prime256v1" is used, the signature length will be 64 because (n/8)*2 and for "secp384r1" it will ...
0
votes
1answer
42 views

Converting ECC Code from python to Java. Extended Euclidean Algorithm not working. [closed]

I'm in the process of converting a Python program I found for calculating ECDSA public keypairs from a given private key. In this particular case it's on the Bitcoin curve. ...
0
votes
1answer
195 views

ECDSA - point order criterion

i am creating some primitive demostration for ECDSA over small curve (p < 229). But my implementation have some weird issues. Verify process return false even if the signature is correct. Because I ...
0
votes
0answers
28 views

How can a lattice attack be applied to ECDSA signatures?

The aim is to check if it is possible to break the ECDSA cryptosystem under the following criteria. Suppose that each ECDSA signature is generated by using the GLV method for point multiplication ...
0
votes
0answers
30 views

verify fails on 3rd party after signing with BouncyCastle

I am using BouncyCastle to perform ECDH and then encrypt the data between the mobile (Android) and my hardware with ECIES. It all works fine. When I try to sign a byte array and send it to the ...
0
votes
0answers
64 views

request for data to test deterministic ecdsa signature algorithm for secp256k1

I’m implementing the RFC 6979 procedure to compute a message signature. I want to test my program on the secp256k1 elliptic curve. Note the “k” in secp256k1, i.e. the Koblitz curve. If you have the ...
0
votes
0answers
76 views

Generating a public key certificate with ECDSA params

I have an ECDSA key generated in a HSM and I am able to retrieve it's public key components via the PKCS11 library. I would like to create a public x509 certificate with the public params for the ...
0
votes
0answers
43 views

Selecting a Bouncy Castle named curve for ECC [duplicate]

I have been tasked with implementing ECDSA and ECDH in Java using the Bouncy Castle library. However, I am unsure of what curve to use. I am aware of the named curves listed in BC, and I've done a ...
0
votes
0answers
36 views

Is it possible to weaken a bitcoin private key by 'using' it elsewhere? [duplicate]

What are the increased possibilities (if any) of being able to crack a private key given the following: The associated bitcoin (ECDSA Secp256k1-based) public key is known. The private key has been ...
-1
votes
1answer
39 views

What does L_n is the bit length of the group order n states need for my calculation in ECDSA algorithm?

I am doing the program of implementing ECDSA for which I am trying to solve the equation scenario. In ECDSA that signature generation algorithm which states as hash value from the SHA-1 and where $l$ ...
-2
votes
1answer
159 views

Why is 2 the inverse of 10?

I have one question about the ECDSA signature scheme. When Bob wants to send a message to Alice that is to be signed she makes following things (with for example $A = (5,1)$, $d=7$, $q=19$). ...