4
votes
1answer
139 views

I need a 64-bit cryptographic hash for 96 bits of data

I have a situation in which I need to combine a 32-bit datum, G, and a 64-bit datum, I, to produce a 64-bit datum. No two ...
3
votes
2answers
157 views

Hashing SHA-512 1000 times

SageMathCloud security (http://goo.gl/dCujW1) is as follows: Only the hash of your password is stored by the server, which uses 1000 iterations of the sha-512 hash function, with a salt length of ...
1
vote
1answer
102 views

Hash functions with or without secret key

The classical definition of hash functions (found in books) are OK, but when studying a little more there is a lot of notions that seem ambiguous (contradictory) to me : Sometimes we have hash ...
1
vote
2answers
107 views

Current standard for hash function security parameter?

When designing a hash function, what should be the secure input and output lengths? In particular, what lengths do I need for collision resistance?
1
vote
1answer
73 views

Would this prevent FNV1a 32 bit hash collision?

I am considering the FNV1a 32 bit hash as part of a simple software security and authentication system. I am aware that FNV1a is NOT ideal but it may suit my needs. I am aware that FNV1a has rather ...
0
votes
2answers
84 views

Is the composition of collision resistant hash with non collision resistant hash a collision resistant hash?

Suppose $h_1$ is collision resistant, and $h_2$ isn't. Will $h(x)=h_2(h_1(x))$ always be collision resistant? [Edited:] the output of h2 must be uniformly distributed
5
votes
2answers
260 views

Can the XOR of two non-collision-resistant hashes be collision resistant?

Suppose I have two hash functions, of which neither (or only one) is collision resistant, and I want to create a new hash function by taking the bitwise exclusive or (XOR) of the results of those two ...
1
vote
0answers
35 views

TCR hash functions from MD5

I'm reading Collision-Resistant Hashing: Towards Making UOWHFs Practical (pag. 10 and 11) and here say The most direct way to construct a TCR hash function is to key a function like MD5 or SHA-1. ...
1
vote
1answer
67 views

Adversary to Any Collision Resistance Hash Function

I'm reading a notion Any Collision Resistance for Hash Functions. In the lecture define a collision finder CF. CF is said to $(t,\epsilon)$-break the family of hash functions $F_K$ if the ...
0
votes
0answers
40 views

Merkle-Damgard transform: necessity of the Length block [duplicate]

The Merkel-Damgard transform append the message length (in blocks) to the message itself and then computing the 'chained hash' algorithm. Does the last block (which contains the length of the ...
2
votes
2answers
81 views

MD5 theoretical question

Ok, so this is a very possible stupid question, but one of those things that has sat at the back of my mind for a while. We all know that MD5 has issues, and these have been known for about a decade. ...
0
votes
1answer
88 views

SHA-1 Keyed Hash Function

I know that SHA-1 is an unkeyed cryptographic hash function when used in practice. But, in the theory, all hash function are defined with keys. My question is: How I will be able to formalize the ...
0
votes
1answer
90 views

Explicit Key SHA-1

I'm reading “Collision-Resistant Hashing? Towards Making UOWHFs Practical” and in the Section 2 it says: Hash functions like MD5 or SHA-1 have no explicit key. But no notion of ...
0
votes
1answer
101 views

No Birthday Attack to TCR

I'm reading the paper “Collision-Resistant Hashing? Towards Making UOWHFs Practical” , which compared TCR (Target Collision Resistant) and ACR (Any collision Resistant). It says we wish to stress ...
2
votes
1answer
53 views

Weaker Notion of Target Collision Resistance

I'm reading the paper “Collision-Resistant Hashing? Towards Making UOWHFs Practical” which states: While it might be easy to find a collision $M,M'$ in $F_K$ by making both $M,M'$ depend on $K$ ...
2
votes
1answer
66 views

Dependence on Keyed Hash Function

I'm reading the paper “Collision-Resistant Hashing? Towards Making UOWHFs Practical” which states: With an ACR hash function $F$ the key $K$ is announced and the adversary wins if she manages to ...
2
votes
2answers
198 views

Difference between collision resistance and target collision resistance

For a hash function, what's the difference between Collision Resistance and Target Collision Resistance?. I understand the definition of hash function collision resistance, but I don't know about ...
1
vote
2answers
147 views

Are there attacks that break collision resistance but not preimage resistance?

Are there any examples of attacks on hash functions which: break collision resistance and second preimage resistant, or break collision resistance and preimage resistant? I have looked at ...
2
votes
0answers
163 views

Question about modifying the MD5 plain text to cause a collision

I was trying to understand MD5 and got stuck with this question, its from Michael sipser's book on Information security Principles and Practice, 2nd edition The MD5 collision in Problem 25 is said ...
4
votes
1answer
384 views

Will rehashing an SHA256 hash continually, eventually produce every possible value?

So let's say you had infinite time and energy. You have a hashed string of some sort. Because you have infinite time and energy, you can produce a collision(or the original value) easily enough. But, ...
4
votes
5answers
388 views

Is it theoretically possible to construct a string that contain its own hash value?

After saw the xkcd comic self-description, I wonder is it theoretically possible to construct a self-descriptive string that contains its own hash value? Let's say the string's md5 value is ...
12
votes
1answer
1k views

Is truncating a SHA512 hash to the first 160 bits as secure as using SHA1?

I am from a web development background (I don't know an awful lot about cryptography or how the algorithms themselves work), so I am asking this question in simple terms. Consider a hash of the word ...
4
votes
4answers
355 views

Compare two hashes with different salt

I'm storing the salted hash of a credit card number in a database. What I'd like to be able to do is determine if two different entries in the same database correspond to the same credit card. ...
7
votes
1answer
353 views

Is it possible to actually verify a “sponge function” security claim?

When using a “sponge function” to create a cryptographic hash, we can look at the flat sponge claim, which flattens the claimed success probabilities of all attacks using a single parameter: the ...
1
vote
2answers
129 views

Digital Signature Scheme Count

My question is How I will be able to count digital signature Scheme that can sign many documents with one private key. There are signature scheme as long as exists private keys in the keys spaces? or ...
5
votes
1answer
558 views

Is there a hash function which has no collisions?

Is there a hash function which has no collisions? To clarify: it would be some function which would produce variable-length output, and never produce the same output for differing input. It would ...
1
vote
2answers
115 views

Does collision resistance stay when extending a hash function to a set domain?

Given a Cryptographic hash function $h$ for element $x$, let's extend it to sets via $H(S)=\prod_{x\in{S}}{h(x)}$. I am asking if the new hash $H$ (in domain of set) is still collision resistant? To ...
11
votes
1answer
576 views

Is Wikipedia's table about SHA-2 collisions correct?

I was looking a Wikipedia article on SHA-2, and the "Comparison of SHA functions" table seems to indicate that SHA-2 is less secure than SHA-1. Is this true, or is the table wrong / misleading? ...
6
votes
1answer
634 views

Using an MD5 hash as a password

Suppose Alice is using a password prompt that only accepts up to 32 characters for any particular password. Memorization of long strings of random characters is not one of Alice's strengths, so she ...
7
votes
2answers
266 views

Finding hash almost-collisions

A few months ago, XKCD posted a challenge to find a plaintext which hashed (using Skein 1024 1024) to a specified value. Inputs were scored based on the hamming distance between the hash of the ...
3
votes
4answers
621 views

Increased CRC collision probability when adding bits to input message

The Scenario I have a message string I need to transport over a wireless network that may be unreliable. This message string is about 100 bits long, and is packaged with an 8-bit CRC. When the ...
5
votes
2answers
327 views

Are cryptographic hash functions perfect hash functions?

For a cryptographic hash function and input values of shorter length than the hash function output, it's pretty obvious that there should be as few collisions as possible. But are there guaranteed to ...
0
votes
0answers
59 views

Strength of Combining Hash functions [duplicate]

If I combine two hash functions, what will the impact on the strength of the resulting function. If I combine in following way: H1*H2 (multiply) H1 + H2 (concat) H1 Xor H2 H1 (H2) EDIT: Lets say H1 ...
2
votes
0answers
79 views

Is SHA-1 collision free on data up to 20 bytes long? [duplicate]

Is SHA-1 collision free on data up to 20 bytes long (lenght of hash / internal state)? That means that every input produce unique output, but you surely know that, i just write it in order my question ...
5
votes
2answers
243 views

Is SHA-1 still practical secure under specific scenarios?

It is conjectured that SHA-1 has been broken from the "research" perspective but no in real world. That is that there is an algebraic attack that explores weaknesses on its algrebraic construction. ...
7
votes
1answer
730 views

Can I find two specific words with the same md5 hash?

I want to find two strings containing special words like "yes" or "no", mixed with random characters, for which the MD5 hash is equal. An example of what I'm looking for: ...
7
votes
1answer
1k views

From hash to Cryptographic hash

After reading some excellent papers on SipHash, I understood that good non-cryptographic hashes such as MurmurHash and CityHash are not secure for MAC usage, due to a certain type of DDos attack ...
2
votes
2answers
1k views

what kind of hash function can provide a short hash and be collision resistant?

When you try to connect via SSH, you see a signature which is short but I heard it is even stronger than sha256. It is perhaps stronger because it uses more rounds. Is there a hash function or a ...
2
votes
1answer
160 views

Finding a collision for a hash function

I'm trying to find a collision for the following (modified) Merkle-Damgard hash function. Suppose we already have a hash function $h : \mathbb{Z}_2^{2·n} \to \mathbb{Z}_2^n$ for fixed length bit ...
5
votes
3answers
258 views

How many bits of hash are realistically needed for key verification?

Say I'm connecting to a web server secured with TLS but with a self-signed certificate. Accordingly, I call the owner of the server and ask him what SHA1 fingerprint he has. He starts reading out the ...
2
votes
0answers
158 views

Does Keccak have an eTCR mode?

On page 7 of NIST's views on SHA-3's security requirements and Evaluation of attacks, I see that, at least at this point, NIST planned on offering SHA-3 having eTCR security (defined on page 3): ...
1
vote
1answer
129 views

Does a break in a collision resistance property of a hash function by definition implies an attack at the first pre-image attack?

Is there a formal security proof in the shape of reduction that states that if an attacker manages to break the collision resistance property of a cryptographic hash function (a random oracle) he will ...
5
votes
4answers
306 views

Can there be two hash functions without common collisions?

Is there a way to prove/create (or are there known hash functions) two hash functions that never have the same collision? I mean, like provable in way that someone who took one cryptography class in ...
19
votes
1answer
3k views

No SHA-1 Collision? Yet SHA1 is broken?

Is there a known pair of distinct bit strings (A,B) such that SHA1(A) == SHA1(B)? If the answer is no than how can SHA1 be considered broken?
5
votes
2answers
244 views

Do MD5's weaknesses affect Oplop?

Oplop is an algorithm that generates account-specific passwords from a master password and user-chosen nickname (typically username@domain). From the website: Concatenate the master password with ...
8
votes
1answer
3k views

How does a birthday attack on a hashing algorithm work?

A "normal", brute-force attack on a cryptographic hashing algorithm $H$ should have a complexity of about $2^{n}$ for a hash algorithm with an output length of $n$ bits. That means it takes about ...
1
vote
1answer
357 views

How to represent a 32-byte SHA2 hash in the shortest possible string?

I'm calculating a SHA2 hash of a certain sensitive key value. I need to store files on disk using this hash a directory path prefix. So lets say I hash the key value 150023, I get a 32-byte value ...
1
vote
2answers
395 views

Real life collision when only using truncated hash

For MD5 two different inputs are known that produce the same 128 bit hash value. However, these inputs are artificially created for this specific purpose. For normal, real life inputs I believe no ...
4
votes
1answer
163 views

Question about hash collisions

If we have a hash function $h(x)$ and then a hash function $H(X) = h(h(X_0) || h(X_1))$ where $X_0$ is the first half of $X$, $X_1$ is the second half of $X$ and $||$ is concatenation. Then assuming ...
5
votes
2answers
1k views

128 bit hash with least chance of collision

I'm building a storage system for JSON documents where they are looked up on a 128 bit key. These JSON documents have a timestamp within them, but apart from that are user-entered data. These JSON ...