HMAC is a method for constructing a message authentication code based on a cryptographic hash function.

learn more… | top users | synonyms

30
votes
2answers
5k views

What do the magic numbers 0x5c and 0x36 in the opad/ipad calc in HMAC do?

Wikipedia lists the following pseudocode for HMAC: ...
14
votes
2answers
6k views

Is HMAC-MD5 considered secure for authenticating encrypted data?

I've read something to the effect that the HMAC construct is able to lessen the problem of collisions in the underlying hash. Does that mean that something like HMAC-MD5 still might be considered ...
12
votes
2answers
649 views

Can I use HMAC-SHA1 in counter mode to make a stream cipher?

Say I have an embedded device which is only capable of doing HMAC-SHA1 transformations (that device is, in fact, a YubiKey). Would it be secure to feed it like a block cipher in counter mode to get a ...
17
votes
2answers
6k views

Using the same secret key for encryption and authentication in a Encrypt-then-MAC scheme

Is it a weakness to use a single shared secret for protecting messages using a Encrypt-then-MAC scheme? Assuming a system is using AES-256-CBC and a SHA1-HMAC and the same secret key for both ...
20
votes
3answers
1k views

Purpose of outer key in HMAC

From what I know, the HMAC constructions has two strength: It's resistant to length extensions Since the key is consumed before the message, the attacker does not know the initial state, preventing ...
7
votes
2answers
553 views

Is HMAC needed for a SHA-3 based MAC?

HMAC does nested hashing in order to prevent Length Extension Attacks. Given that you use the SHA-3 hash (which is resistant against length extension attacks), would you still need to go through that ...
17
votes
2answers
20k views

HMAC-SHA1 vs HMAC-SHA256

I have three questions: Would you use HMAC-SHA1 or HMAC-SHA256 for message authentication? How much HMAC-SHA256 is slower than HMAC-SHA1? Are the security improvements of SHA256 (over SHA1) enough ...
11
votes
2answers
823 views

Why is the salt used only once in PBKDF2, while the password is used often?

The purpose of PBKDF2 is to create a derived key (DK) from a master password (PW) and a salt, often using a function like HMAC-SHA256. I have read that the salt should be as random as possible. But ...
7
votes
2answers
728 views

Which risks are associated with deriving multiple keys from the same DH secret Z?

NIST recommends Krawczyk's HMAC-based key derivation function (HKDF) in SP-800-56C (PDF). HKDF shall e.g. be used to create keys from shared secrets after Diffie Hellman key establishment. NIST ...
5
votes
2answers
250 views

How is HMAC(message,key) more secure than Hash(key1+message+key2)

I understand how for hash functions which are vulnerable to length extension attacks (such as SHA1 and SHA2) it is safer to use a HMAC construction. What I don't understand is, how or why is ...
6
votes
2answers
352 views

Is my HMAC secure if I have a complete series of HMAC'd prefix strings

Let's say I have a long sentence, like "The quick brown fox jumped over the lazy dog." Let's further say that I need to keep this string encrypted, so I use an HMAC. Let's further further say I want ...
9
votes
4answers
964 views

Can I determine if a user has the wrong symmetric encryption key?

We're using the Objectivity/DB object database with a custom encryption plugin that encrypts serialized objects on disk. Encryption uses AES with a shared secret key held by all users. I would like to ...
9
votes
1answer
766 views

Why does a broken hash function undermine an HMAC?

For instance, what makes MD4 a bad choice for an HMAC? In this case I am asking about MD4 because its less than ideal. I know that a preimage attack can be used to undermine the system, but why? ...
20
votes
1answer
1k views

How secure would HMAC-SHA3 be?

It would be possible to implement the HMAC construction with (draft) SHA-3, leading to HMAC-SHA3-224, HMAC-SHA3-256, HMAC-SHA3-384, HMAC-SHA3-512 (the last 3 digits are the output size $\ell$, where $\...
15
votes
1answer
1k views

Is Encrypt+HMAC stronger than AEAD?

There are a few posts that I've come across that seem to infer that using regular encryption and a MAC might be better than using the newer AEAD (ie: AES/GCM) modes. http://www.daemonology.net/blog/...
11
votes
1answer
3k views

Use cases for CMAC vs. HMAC?

Both can be used to verify the integrity of a message. Assuming you have the needed primitives available to you (i.e. the code space of needing both a cipher and a hash function isn't prohibitive), is ...
10
votes
1answer
228 views

Can Skein be used as a secure MAC in format H(k || m)?

Can Skein be used as a secure MAC in format H(k || m)? I understand it can work with HMAC, but it is fine as a one-pass MAC in the format above and resists length extension attacks. Is this ...
7
votes
1answer
405 views

What size should the HMAC key be with SHA-256?

I'm trying to generate a secret key to be used for HMAC SHA-256 signature processing. I've seen many sample of keys with variable length from 32 characters to 96 characters. What is the ironclad rule ...
7
votes
3answers
3k views

What is the difference between a HMAC and a hash of data?

On a recent question it became apparent that there's a significant difference between an HMAC of input data and a hash of input data. What exactly is the difference between an HMAC and a hash of a ...
4
votes
2answers
6k views

Why is HMAC-SHA1 still considered secure?

This Q & A http://security.stackexchange.com/questions/33123/hotp-with-as-hmac-hashing-algoritme-a-hash-from-the-sha-2-family says that the security of HMAC-SHA1 does not depend on resistance to ...
3
votes
1answer
468 views

Should HMAC or NMAC or plain Keccak be used for a secure MAC?

After some digging around in the HMAC spec I found this (paraphrased): Step 1: If the length of Key equals the block size of the hash function (512 bits/64 Bytes for SHA-256), set the key equal ...
5
votes
1answer
659 views

For a one-time pad, which MAC method is information-theoretically secure?

In the the main post about MAC methods it mentions a few methods: Authenticate And Encrypt: The sender computes a MAC of the plaintext, encrypts the plaintext, and then appends the MAC to the ...
2
votes
1answer
492 views

Encryption and HMAC key derivation

I'm deriving keys from a user-supplied passphrase for symmetric encryption using AES-256 in CBC mode with a HMAC for authenticity/integrity. My key derivation function currently looks like this: ...
1
vote
2answers
1k views

Deriving HMAC key and cipher key from passphrase? [duplicate]

I'm encrypting a file with AES-256 in CBC mode. I needed to add an HMAC for authentication and validation of the file contents and passphrase, so I used a SHA-256 HMAC over chunks of my file ...
11
votes
2answers
12k views

What is the difference between MAC and HMAC?

In reference to this question, what are the "stronger security properties" that HMAC provides over MAC. I got that MAC requires an IV whereas HMAC doesn't. I also understood that MAC may reveal ...
7
votes
3answers
1k views

How to authenticate over open channel?

I am making an arduino project to open my garage door. I want to make it so users with the passphrase can open the door. Due to computational restrictions it is unlikely encryption is possible. ...
8
votes
2answers
940 views

HMAC vs ECDSA for JWT

I will be implementing JSON web tokens into my website and have a question about implementing them. I have a choice of using two algorithms, HMAC-SHA256 and ECDSA-SHA256. I have used HMAC-SHA256 in ...
6
votes
2answers
3k views

Is PBKDF2-HMAC-SHA1 really broken?

I just read through this article which demonstrates practical (and seemingly trivial) collisions in PBKDF2-HMAC-SHA1, and provides a few examples of collisions. Am I missing something here? Is PBKDF2-...
17
votes
1answer
13k views

HMAC vs MAC functions

I've read definitions of MAC and HMAC, but can't say I've completely grasped the differences. What are principle differences? When to use one and when the other?(Typical Use Cases)
9
votes
2answers
928 views

Encrypt-then-MAC: Do I need to authenticate the IV?

In the setting of Encrypt-then-MAC, do I need to include the IV in what I'm HMACing, or is authenticating just the AES-encrypted data sufficient?
4
votes
1answer
3k views

SHA256 HMAC brute force with chosen plaintext attacks

This is a follow up to Is It Possible To Reconstruct a Cryptographic Hash's Key I am using a SHA-256 HMAC function on a single-word input: sha256hmac(privatekey,word) = output. The private key length ...
3
votes
1answer
2k views

Brute forcing an HMAC

Given current technology such as GPUs and GPU cracking software I was wondering if anyone has an idea on how long it would take to brute force the key used to derive an HMAC?
2
votes
2answers
6k views

AES+CTR+HMAC Encryption and Authentication on an Arduino

In my project we would like to encrypt and authenticate the the communication channel between our server and our Arduino nodes, which relies on an underlying TCP channel. We have chosen AES in CTR ...
7
votes
2answers
225 views

Should HMAC-SHA3 be preferred over H(C(k,M))?

If I understand correctly SHA-3 (Keccak) is resistant against more attacks than SHA-2. This would make it possible - again if I understand correctly - to use SHA-3 with a simpler scheme than HMAC. ...
7
votes
2answers
646 views

Is HMAC-MD5 still secure for commitment or other common uses?

MD5 collisions have been out for some time. In spite of this, HMAC-MD5 is still secure for authenticating data1. This illustrates a strength of the HMAC construction, it does not require that the hash ...
6
votes
1answer
347 views

Security of this deterministic encryption scheme

I recently came across a library that promises to do deterministic encryption with the following scheme: AES with 256 bit key in CBC mode with PKCS7 padding and Synthetic Initialization vector ...
6
votes
1answer
281 views

Is HMAC-SHA-1 secure?

Although SHA-1 theoretically has collisions, HMAC-SHA-1 which is based on SHA-1 is still widely used (in TLS for example) and is considered to be secure. How is that possible?
5
votes
1answer
705 views

Security for IV in AES-GCM mode

I'd like to use AES-GCM instead of HMAC for authentication and privacy in a token used in a web application, but I'm unsure how to securely tag each token with an IV. Is it safe for me to prepend the ...
4
votes
2answers
128 views

Is it okay to use an HMAC of the plaintext and a (possibly distinct) key as the IV for symmetric cryptography?

I was thinking of how to create an IV for a block cipher that doesn't require stored state, and I came up with the idea of using an HMAC of the (padded) plaintext and a (possibly distinct) key as the ...
3
votes
1answer
152 views

Double randomised HMAC verification to prevent timing attack

A way to prevent timing attacks for hash string comparison is to perform additional HMAC signing in order to randomize the verification process (see Double HMAC Verification). In addition to the ...
2
votes
2answers
192 views

Equivalent key size between HMAC and AES?

I have seem comparison between AES and RSA, e.g., AES 128 bit key is equivalent to RSA modulus 3072 bits. Is there such comparison between AES key size and HMAC?
7
votes
2answers
340 views

Is the HMAC construction really neccessary for a fixed length message?

The HMAC Construction is defined as: Hash( (Key XOR opad) || Hash((Key XOR ipad) || Message) ) This was designed because a simpler construction such as: ...
7
votes
2answers
366 views

Is calculating HMAC from hashed input a good idea?

Original HMAC algorithm is as follows: H(K XOR opad || H(K XOR ipad || text)) What if text would replaced with H(text)? ...
6
votes
1answer
589 views

HMAC for short messages

I am using HMAC (hmac-sha256 to be precise) message authentication without encryption. My question is, is having a short message make it easy to determine what my secret key is? My C# code is as ...
5
votes
1answer
271 views

HMAC construction based on the combination of two hash functions

I would like an $\operatorname{HMAC}$ that's based on two different hash functions ($H_1$ and $H_2$), so that a break of the combined $\operatorname{HMAC}$ would imply a break of $\operatorname{HMAC}(...
4
votes
1answer
228 views

Securely generating passwords based on a secret and a public identifier

I'm trying to create a good scheme for generating passwords in my systems management scripts. What I'd like to do is have a secret key (let's say hello123), which I ...
4
votes
1answer
187 views

Authenticate a short message with redundant encryption instead of using a MAC?

I have a short message that’s exactly 128 bits of length. The message serves as a time-limited authorization token for a database. It contains a permission profile ID (64 bits) and an issue timestamp (...
4
votes
2answers
171 views

Encrypt-then-HMAC implementation - am I doing it right?

I want to implement authenticated encryption using C#. There is a dot net class called encryptAndAuthenticate, but it is only supported on windows 8 or later, and I need the code to also work on ...
4
votes
1answer
2k views

HMAC-SHA1 input size

I know that the HMAC is a message authentication code that uses a cryptographic key in conjunction with a hash function (SHA1 , MD5, etc.). The HMAC output is 160 bits for HMAC-SHA160 and 256 bits for ...
4
votes
1answer
109 views

Using HMAC as a nonce with AES-CTR encrypt-and-MAC

Suppose I use the following encrypt-and-MAC construction: $E(k_1, k_2, n, m) = E_\text{AES256-CTR}(k_1, n, m) \| \text{HMAC-SHA256}(k_2, m)$, where: $k_1$ and $k_2$ are 256-bit keys $n$ ...