Implementing a cipher or protocol is the process of taking it from its mathematical or algorithmic description and producing a working version, often in computer software or hardware. This tag should be used for any question discussing the various potential considerations and pitfalls of this ...

learn more… | top users | synonyms

2
votes
1answer
290 views

How do TLS 1.1 and 1.2 generate IVs (initialization vectors) for each record?

According to RFC 4346 Explicit IVs [CBCATT] describes a chosen plaintext attack on TLS that depends on knowing the IV for a record. Previous versions of TLS [TLS1.0] used the CBC ...
1
vote
0answers
201 views

Does BouncyCastle (for ECC) resist timing attacks?

I need to extend the TLS protocol to be able to use other key exchange scheme based on elliptic curves. I am planning to use BouncyCastle's implementation in Java and in .NET. I am worring about ...
0
votes
1answer
461 views

Attribute-based cryptography [closed]

I am trying to create a social network, in which I want to use attribute-based cryptography. One professor told me it is possible to do it only in J2EE, but he can barely code! Some friends of mine ...
6
votes
4answers
2k views

Is there any opensource white-box implementation of AES or DES?

I googled it and give me no result. There is a binary executable of white-box implementation of DES (scroll down), but no source code provided. The same page also links various papers about ...
1
vote
0answers
102 views

Career advice for our readers [closed]

I am a first year math PhD student with work experience and an MS in math. Do you have any advice regarding internships involved with cryptography and other mathematics other than the NSA? Thanks.
3
votes
1answer
462 views

Is there any implementation of scrypt that allows a specific limit on memory?

The answerer has commented that scrypt's memory use is "only a function of r". $\:$ However, he has not addressed my argument that it also depends on N, in one of my comments from over 5 days ago. I ...
8
votes
2answers
640 views

Can one implement AES on 4-bit microcontroller?

It is possible to implement AES on 4-bit microcontroller? As far as I know, AES on 8-bit microcontroller are common especially for light weight application such as the RFID. I have yet to come across ...
4
votes
2answers
402 views

Signature schemes for underpowered devices (8bit microcontroller)

I am currently researching into a small scale home automation system, aiming for cost. The system architecture is basically one master and several slaves which are connected in parallel. Recently ...
0
votes
2answers
93 views

Create a field in PBC

Edited (I removed the emphasize on Integers): My question is partly cryptography and partly programming, I would appreciate any help on any aspect of it :) I want to use PBC library to do the ...
8
votes
3answers
306 views

Should I delete cryptographic data from memory?

When dealing with cryptographic data, is there a chance that attacker recovers portion of data I used in my program? Should I try to delete every bit of keys and encrypted data that I used, overwrite ...
1
vote
0answers
349 views

Keepass Twofish plugin security

Keepass is a well known open-source password manager program, with plugin support. One of the offered plugin is a twofish encryption mode of operation in lieu of the build-in AES algorithm ...
5
votes
2answers
624 views

How does one calculate the cryptoperiod?

NIST Special Publication 800-57 defines a cryptoperiod as the time span during which a specific key is authorized for use by legitimate entities, or the keys for a given system will remain in ...
6
votes
2answers
1k views
3
votes
2answers
2k views

How to perform file encryption using 128-Bit AES?

I am confused, how can I encrypt a file using 128 Bit Advanced Encryption Standard? Do I need only to encrypt the file name and it's content or is there something that I need to do to encrypt it? Is ...
2
votes
3answers
438 views

Questions about BCrypt and PBKDF2

I would ask you some questions about users' password storage in a login system. What algorithm do you suggest me to use? bcrypt or PBKDF2? I was looking for a way to implement them client-side and ...
2
votes
1answer
234 views

Ed25519 choice of private key implementation

This answer to another question describes the different values chosen as private key and public key by various Ed25516 implementations. What are the advantages / disadvantages of each? (Table ...
3
votes
1answer
580 views

SIMON implementation, decryption issues

I've been trying to implement the new SIMON block cipher in Ruby as a personal challenge. The spec didn't include a pseudocode version of the decryption but I thought I had it figured out. The code I ...
1
vote
1answer
254 views

Polynomial multiplication and division in2^128

I want to multiply and divide polynomials, and implement the extended Euclidean algorithm for polynomial greatest common divisors, over a Galois Field of size $2^{128}$. Moreover, I want to use the ...
4
votes
1answer
222 views

Length of data to hash for PGP

I have finally managed to verify some simple PGP signed message blocks. However, I discovered that for some reason, my implementation limits me to verifying data that is 9-16 bytes long. no less. no ...
1
vote
0answers
53 views

OpenPGP tag 18/19 description confusion Continuation [closed]

After coming back to try to finish more of my OpenPGP implementation, I refound one of my questions http://stackoverflow.com/questions/6021360/openpgp-tag-18-19-description-confusion that I am still ...
3
votes
1answer
665 views

What is U2FsdGVkX1?

Using CryptoJS 3.1 I noticed that using 3Des, the encrypted message always start with U2FsdGVkX1 Why is the first part of the encryption always the same? What information does this hold and ...
2
votes
2answers
135 views

How to compare two datasets „anonymously”?

Ok, I hope this question makes some sense because I am not so sure how to word it any differently… Imagine the following situation: There are 10 defined colors (blue, orange, yellow etc.) There are ...
3
votes
1answer
175 views

In ECDSA, how many field operations are used for signature verification?

I am wondering about the computational cost of ECDSA signature verification, in term of multiplications in the base field; and, as an aside, in term of (much cheaper) additions. To make things ...
4
votes
2answers
674 views

Why is SRP not widely used?

SRP seems to be a very good password authentication protocol, compared to any other things used now. So why is there no popular implementations, or even no working secure implementations? I tried to ...
0
votes
1answer
73 views

Encrypting a broadcast channel

We're building a data service that is expected to go out through a single "fat pipe" channel. The design requirement says that the data in the channel must be protected by authentication and ...
1
vote
3answers
595 views

Implementing secret reconstruction in Shamir's Secret Sharing

I am trying to implement Shamir's secret sharing in C++. I have got the generation of shares working. However, I am very confused with the reconstruction of shares. I get the part on how three users ...
6
votes
3answers
680 views

McEliece Cryptosystem Implementations

Are there any current implementations (language irrelevant) of the McEliece Cryptosystem? I have been hunting around all day, and yet, have only found a few mathematical equations pertaining to the ...
2
votes
2answers
194 views

Zero-Knowledge Challenge-Responce Protocol

Good day to everyone. I am trying to implement an e voting system (just for reference -it is not important though-it is described at the Internet Voting Protocol Based on Improved Implicit Security ...
1
vote
1answer
112 views

Trapdoor implementation

Please refer to this secure index paper. On page#6, a trapdoor is defined as ...
4
votes
2answers
523 views

Is this a correctly formatted PGP session key packet?

RFC 4880 may be full of information, but it can be incredibly vague at times, so im looking for someone who actually knows the answer to this. Given this public key: ...
1
vote
1answer
79 views

What is the most secure way to let Alice “input” her private key, transfer it to the server and decrypt the message?

What is the most secure way to let Alice "input" her private key, transfer it to the server and decrypt the message? (Then destroy the private key on the server) Every connection is using SSL. ...
1
vote
1answer
175 views

What does modular inversion mean?

I'm trying to implement an e-voting algorithm, which is described at the paper "Internet Voting Protocol Based on Improved Implicit Security" by Abhishek Parakh & Subhash Kak. At the Example 1 ...
4
votes
1answer
162 views

Two way encryption with random IV

I'm attempting to encrypt some information into our database to be later pulled back out and displayed to the user. Searching and reading up on different methods I found a post over at stack exchanged ...
3
votes
1answer
615 views

On-the-fly computation of AES Round Keys for decryption?

The usual implementation of AES first computes all the Round Keys sequentially starting from the key, and stores them in RAM for later uses. However, when enciphering a single block with a key that ...
5
votes
1answer
299 views

Are there any Implementations of Secure Indexes? [closed]

There are several papers about Secure Indexes, for Example "Searchable Symmetric Encryption: Improved Definitions and Efficient Constructions" and "Secure Indexes". ...
1
vote
2answers
202 views

What cipher mode is suitable for independantly decryptable short messages?

I'm building a small VoIP client which transmits encrypted audio data via UDP, and some packet loss is expected, so each packet will need to be decrypted separately even if others in the stream don't ...
3
votes
2answers
592 views

Implementing AES in C++: 4x4 Array of unint8_t, or 4x1 array of uint32_t?

I'm implementing AES in C++, and, inspired by the way words are handled in SHA, I decided this time to handle the state as a one dimensional array of 4byte unsigned integers as opposed to a two ...
1
vote
1answer
1k views

How can I implement the “Multiplication Modulo” and “Addition Modulo” operations in IDEA?

I am currently working on IDEA (International Data Encryption Algorithm), and I don't know how to perform Multiplication Modulo and Addition Modulo. This is how IDEA operates: IDEA operates on ...
3
votes
3answers
400 views

How to avoid a chicken and egg scenario with encrypting passwords?

I am working on application that allows users to upload files containing company data and then share those files with a list of other users that have specific roles within the system. I want to ...
1
vote
1answer
434 views

RSA 1024bit decryption performance

i want to know how many RSA 1024 bit long key decryption can a regular pentium4 computer do per second ? how to calculate RSA performance and determine its remaining time ?
1
vote
1answer
364 views

Recommended Books for Cryptography : Theory and Implementation [closed]

It is a great idea if experts in Cryptography from mathematicians to security engineers introduce books and textbooks which they think is helpful or instructive for all people interested in the ...
4
votes
2answers
368 views

Cryptographic GUID?

I need a GUID. Really just any number that is likely to be unique. However I prefer not to leak time and other things as a GUID may leak. What should i use as a cryptographic replacement? I was ...
7
votes
1answer
326 views

Why x00 is usually avoided in salt?

In .NET Framework, there is a cryptographic Random Number Generator (RNG) provider which enables to generate a cryptographically strong sequence of random bytes. This provider contain, among others, ...
1
vote
3answers
107 views

MISTY1 Implementation error

I am trying to implement MISTY1. It's RFC, RFC2994, contains psuedocode that I basically copy and pasted into Code::Blocks. However, I managed to mess that up somehow. After 2 days, I still have not ...
2
votes
0answers
136 views

How to properly format a PGP Message Block?

As sort of a follow up to my (currently) unanswered question, if it is correct, how do i properly calculate and format the packet that actually stores the data being encrypted? I thought I knew what I ...
3
votes
2answers
458 views

Additive ElGamal cryptosystem using a finite field

I'm trying to implement a modified version of the ElGamal cryptosystem as specified by Cramer et al. in "A secure and optimally efficient multi-authority election scheme", which possesses additive ...
2
votes
1answer
453 views

Is there a standard for OpenSSL-interoperable AES encryption?

Many AES-encrypted things (files, strings, database entries, etc.) start with "Salted__" ("U2FsdGVkX1" in base64). I hear it's some sort of OpenSSL interoperability thing a b c. Is there some ...
1
vote
1answer
692 views
1
vote
0answers
177 views

Proper formatting of symmetric algorithm secret key

Given this description from RFC 4880 sec 5.1: The value "m" in the above formulas is derived from the session key as follows. First, the session key is prefixed with a one-octet algorithm ...