Random data used by block cipher modes of operation to randomize the output in order to achieve semantic security. Also for other similar constructs in other iterative algorithms.

learn more… | top users | synonyms (1)

2
votes
3answers
207 views

How to renew keys for a statically-encrypted database

Preamble Before I ask this question, please accept that I fully understand that 'rolling your own' is never a good idea, and that I am a relative n00b. The only reason I am doing this the way I am is ...
3
votes
1answer
442 views

Generating an IV for ESP 3DES-CBC

I have an application written in C, running in Linux. It uses IPsec (ESP) (manually putting the IPSec packet together) to send certain packets. The algorithm used ...
2
votes
2answers
171 views

No IV for one off symmetric file encryption

My question is (hopefully, for somebody) a simple one; but my project is holding as I'm not sure. I read on SO that generating encryption keys without an IV is a bad idea, so is using a constant IV ...
3
votes
2answers
549 views

Encrypted counter as IV in CBC mode encryption using same key

I'm currently working with a secure transport protocol that defines the IV to be a counter (incremental nonce) to be encrypted with the same key. This is a followup to a protocol that did not provide ...
1
vote
0answers
474 views

Keepass Twofish plugin security

Keepass is a well known open-source password manager program, with plugin support. One of the offered plugin is a twofish encryption mode of operation in lieu of the build-in AES algorithm ...
3
votes
1answer
238 views

iOS Data Protection: What is the Input of the LFSR?

Every time a file on the data partition is created, Data Protection creates a new 256-bit key (the “per-file” key) and gives it to the hardware AES engine, which uses the key to encrypt the ...
4
votes
1answer
195 views

Swapping Key and IV in AES? Safe?

I have an application where I want to be able to send an encrypted file, and then mete out "keys" that allow the receipient to decrypt the file from a certain point to the end of the file. Actually, ...
5
votes
1answer
434 views

AES-SIV security

I am invesigating the AES-SIV (rfc 5297) based block cipher. The construction of the S2V is lying on the AES-CMAC and dbl and XOR operation. Given a AAD the size of L and in the 128bit block ...
1
vote
0answers
193 views

IV and Headers inside cipher text

I am a bit confused about the use of IV, and key hash. Is the key hash and IV stored inside the headers of the cipher text? Isn't it a security risk to store this header information? By key hash I ...
3
votes
0answers
56 views

CBC with random prefix but no IV - secure? [duplicate]

I'm looking at a datagram-based protocol that encrypts a payload. The payload is encrypted with AES or blowfish in CBC mode, and the result is then authenticated with a HMAC. To save space, the ...
2
votes
1answer
223 views

Why restrict nonce/IV and counter to specific sizes?

When setting up a nonce/IV and counter (e.g. for AES-GCM-128), why are the nonce/IV and counter restricted to specific sections (e.g. random nonce/IV in first 8 bytes and counter in last 8 bytes)? ...
3
votes
2answers
278 views

How to calculate leaked information from a check digit

Given a check digit calculated using mod 11, of an encrypted numeric sequence of 8 digits, how much information can be known about the plaintext? More specifically, a single 3DES encrypted CBC block ...
18
votes
2answers
7k views

Why use an Initialization Vector (IV)?

Why use an Initialization Vector (IV)? How are IV's used? What are the advantages/disadvantages of using an IV? Why use an IV instead of a longer key in which some section of the key is pubic? What ...
2
votes
2answers
268 views

IV Security Clarification

After doing lots of reading on SO and other websites relating to AES cryptography, I am trying to understand the security issues surrounding IV's. There seems to be a lot of confusion and ...
2
votes
2answers
344 views

Generating IV in TLS 1.2

I'm writing a TLS 1.2 implementation (in C#) using a custom protocol. My question is how to generate the IV attached to each message, I don't want to use RandonNumberGenerator because I've heard it ...
2
votes
1answer
194 views

Can prepending “junk” be equivalent to an IV when encrypting using CBC?

We are encrypting a small positive integer (1-1000) with a constant key using AES256 encryption. We are considering two approaches to make this secure; use an initial vector (which we then need to ...
5
votes
1answer
219 views

Is there an existing AEAD scheme with minimal IV requirements?

Is there an existing AEAD scheme such that, for inputs with the same AD and IV ciphertexts are allowed to leak whether or not their plaintexts are equal, if the scheme can process the plaintext in a ...
4
votes
1answer
5k views

Does the IV need to be known by AES (CBC mode)?

I was thinking about this today and thought I should ask. I think I understand IV's enough to say that they are basically the same thing as Salts when talking about hashes. They are there to improve ...
1
vote
1answer
355 views

Is there a preferred way/standard on how to transmit an initialization vector for AES encryption

Is there a preferred way on how to transmit the initiliazation vector with witch AES encryption was made? I could imagine that, if the encrypted data is stored to a file, the IV is preppended at the ...
4
votes
1answer
728 views

What are the constraints for an IV using AES in CBC mode?

I'm designing a protocol for use into a VPN software. The VPN frames are encapsulated into AES-256 CBC encrypted frames. I understand that IVs must be uniquely used for each message encrypted with ...
3
votes
2answers
1k views

Validating successful decryption in AES

I have a program which uses AES-256 in CBC mode to encrypt and decrypt files. As I have quickly realized, AES will even use an incorrect passphrase to decrypt data, which leaves me with no way to ...
2
votes
1answer
789 views

How does Output Feedback mode use the initialization vector?

How can I process Initialization Vector inside the Block Cipher Encryption box (using for example AES) together with the Key? Will I encrypt the Initialization Vector like a block of plaintext? So ...
1
vote
2answers
323 views

AES encryption with shared IV

Sorry about the horrible title, didn't now what to say. I'm trying to avoid having to send an IV with every message purely to keep packet sizes down, so I thought of a method to establish a "IV ...
12
votes
5answers
2k views

Using CBC with a fixed IV and a random first plaintext block

What if, instead of using CBC mode in the normal way with a random IV, I used this approach: Use a fixed IV (like a block of 0's). Before encrypting, generate a random block and prepend it to the ...
3
votes
0answers
111 views

CBC with fixed IV but changing data [duplicate]

Possible Duplicate: Using CBC with fixed IV I am using AES in CBC mode. For some reasons I have some issues for transmiting the IV. So I am using a fixed IV. If the first 128bits of the ...
7
votes
3answers
476 views

Is it safe to use file's hash as IV?

I'm encrypting some files using AES in CBC mode. I'm also using file's digest (SHA-1) to check that data is decrypted correctly (so I need to store it with file). Is it safe to use this digest as ...
5
votes
1answer
195 views

Two way encryption with random IV

I'm attempting to encrypt some information into our database to be later pulled back out and displayed to the user. Searching and reading up on different methods I found a post over at stack exchanged ...
2
votes
0answers
174 views

Why not use CBC, not send IV, and assume first plaintext block is garbage? [duplicate]

Possible Duplicate: Using CBC with fixed IV Forgive me if this has been asked before, I looked but haven't seen any answers that suit. Is there any danger in using CBC, encrypting a ...
7
votes
2answers
248 views

Will varying plaintext compensate for a fixed initialisation vector?

This is a follow-up question to Relative merits of AES ECB and CBC modes for securing data at rest. I need to store encrypted Personal Account Numbers (PANs) in a database. The only encryption option ...
4
votes
1answer
3k views

Why, or when, to use an Initialization Vector?

i'm trying to figure out when an Intialization Vector (IV) should be used. There are anecdotal reports that WEP was broken because of weak IV's. It's also claimed that if two pieces of plaintext are ...
5
votes
2answers
3k views

Is AES in CBC mode secure if a known and/or fixed IV is used?

I have a need to encrypt credentials for a third-party app used by a secured internal app. Over on ITSec.SE, I was helpfully shown a scheme to encrypt the third-party credentials based on a hash of ...
3
votes
1answer
1k views

Implementing AES encryption for firmware distribution system

I need to implement an AES encryption for firmware distribution system. I have a bootloader that can decrypt various AES variants (ECB,CBC,CTR). When I approached this I found few issues that aren't ...
13
votes
2answers
4k views

What's is the main difference between a key, an IV and a nonce?

What are the main differences between a nonce, a key and an IV. Without any doubt the key should be kept secret. But what about the nonce and the IV. What's the main difference between them and their ...
4
votes
4answers
630 views

Which block cipher modes of operation allow a predictable IV?

Recently I found out that in the modes CBC and PCBC the IV may be passed in cleartext but never must be predictable. However for this part of my app I rather have the IV be predictable and unique ...
3
votes
1answer
1k views

What is the difference between these AES encryption methods

I am using AES encryption (Rijindael) with Base-64 encoding in Obj-C and VB. I am currently using the following two projects to achieve this: Obj-C: ...
11
votes
2answers
2k views

Is using a predictable IV with CFB mode safe or not?

While writing this answer, I noted that NIST SP 800-38A says that (emphasis mine): "For the CBC and CFB modes, the IVs must be unpredictable. In particular, for any given plaintext, it must not be ...
2
votes
4answers
1k views

Is my pseudo-random initialization vector secure?

How can I know if I am generating a secure pseudorandom initialization vector? Currently I am planning to generate a pseudo-random initialization Vector using current date and time - is this secure ...
3
votes
2answers
983 views

Why can't the IV be predictable when its said it doesn't need to be a secret?

I heard multiple times not to reuse the same IV and IV should be random but doesn't need to be secret. I also heard if the IV is something like sequential numbers or something predictable I should ...
4
votes
3answers
1k views

Why does CBC decryption with a wrong IV still give readable results?

While developing some code that uses the .NET AesManaged algorithm, I made some mistakes but was surprised at the results. My encryption was correct. I was generating a random IV block and writing ...
2
votes
2answers
304 views

Is the Blum Blum Shub PRNG suitable to create initialization vectors?

Is it a good idea to use a Blum Blum Shub Generator to create my initialization Vector (IV) in AES-OFB (Output Feedback Mode)?
2
votes
1answer
814 views

Generating a strong unique Initialization Vector

How can I determine if I am generating a unique and strong Initialization Vector? If my mode is generating Keystream? Is there any scientific explanation in generating a unique and strong ...
4
votes
1answer
1k views

Why must IV/key-pairs not be reused in CTR mode?

Many sources mention that IVs must not be reused with the same key in CTR mode, for encrypting 2 different pieces of data, because that totally destroys security - but I haven't found an explanation ...
4
votes
1answer
299 views

Is it secure to use the hash of key as the IV in AES encryption?

I need to store some sensitive data for a program. For each copy of the program, there will be a unique key for encrypting one (and only one) file using AES encryption (OFB). The key will not be ...
1
vote
2answers
4k views

Initialization vector length insufficient in AES

I use AES with AES/CBC/PKCS5Padding with the following encryption and decryption code sections in Java: ...
6
votes
3answers
2k views

Encryption with “constant” initialization vector considered harmful

I try to get the full reasoning behind the above statement. First, after reading articles here and at wikipedia i understand that using an IV only once is good practice. For stream ciphers not doing ...
8
votes
3answers
1k views

Is it okay to use a hash of a timestamp as the IV for AES?

The message format includes a datetime field in the clear. Is it okay to also use this field (or some hash thereof) as the initialization vector? In this case, CBC is the mode being used.
7
votes
2answers
2k views

How to calculate an IV when I have a shared private key?

I'm working with a server/client system that has securely negotiated a private key. I need to encrypt/decrypt messages passing in both directions which are typically between 100 bytes to 100 KB. I'm ...
6
votes
1answer
2k views

Why not use CTR with a randomized IV?

I'm currently reading the chapter of Cryptographic Engineering (Ferguson, Schneier, Kohno 2010) about block cipher modes of operation. They have recommended CBC with random IV instead of CTR due to ...
7
votes
1answer
4k views

How do I correctly derive a Key and IV?

Mainly I'm trying to understand how to correctly create the Key and IV for use with the .NET Implementation of AES (AesManaged class). This encryption code will be used in conjunction with existing ...
3
votes
1answer
265 views

OCB - brute force against unknown IV

I read that brute force attacks against a plaintext encrypted in OCB with unkown key and IV has approximately the same complexity as an attack where only the key is unknown. Why is that ? Is there a ...