Unique data used by block cipher modes of operation to randomize the output in order to achieve semantic security. Also for other similar constructs in other iterative algorithms.

learn more… | top users | synonyms (1)

4
votes
1answer
154 views

What are the steps to decrypt a TLS 1.1 record?

My question is related to another question in Cryptography about TLS 1.1 and 1.2. I have read both RFC 2246 The TLS Protocol Version 1.0 and RFC 4346 The TLS Protocol Version 1.1. What I know is that ...
4
votes
1answer
112 views

Are IVs and salts the same and usable for each other uses?

I'm new in the crypto world and I've just discovered PBKDF (I used to use typed passeword as symmetric key). When using some crypto mode, you're required to ...
3
votes
3answers
414 views

For AES CBC, can I encrypt the IV with AES ECB and the same key and include it with the message?

Is it safe to use this process: Generate Key, IV Encrypt Message with Key, IV and AES CBC into EMessage Encrypt IV with ECB into EIV Send over EIV + EMessage Then the recipient Decrypt EIV with ...
3
votes
4answers
3k views

Initialization vector in symmetric-key encryption

Can we use symmetric-key algorithms without an initialization vector? I am making an app where both the sender and receiver share a key and there is no way to create an initialization vector for each ...
3
votes
2answers
213 views

Why would an Initialization Vector be supplied externally?

My software uses a 3rd party encryption appliance. One of the capabilities they allow is for the client software to supply an IV while doing CBC encryption. Why would they not generate a random ...
3
votes
1answer
1k views

What is the difference between these AES encryption methods

I am using AES encryption (Rijindael) with Base-64 encoding in Obj-C and VB. I am currently using the following two projects to achieve this: Obj-C: ...
3
votes
1answer
245 views

AES 128 bits with 12 bytes IV vector composed of a 4 bytes counter : safe?

I have a 128 bits AES cypher (GCM, Galois/Counter Mode) using a 12-byte initialization vector (IV) composed of: 8 constant bytes: 6 bytes (device ID) 2 bytes (zero) 4 bytes (incrementing frame ...
3
votes
3answers
3k views

How to break AES/CBC/PKCS5 when key and IV are reused?

I'm doing a code review for a crypto solution that reuses the same key with a constant IV. I want to demonstrate that this is not the right way to do things by figuring out the key and decrypting all ...
3
votes
2answers
287 views

No IV for one off symmetric file encryption

My question is (hopefully, for somebody) a simple one; but my project is holding as I'm not sure. I read on SO that generating encryption keys without an IV is a bad idea, so is using a constant IV ...
3
votes
1answer
67 views

Is it secure to use hexadecimal data for IV instead of raw binary?

Is it safe and secure to use a function like bin2hex (which converts binary data to hexadecimal) on the binary output of functions like ...
3
votes
2answers
2k views

Validating successful decryption in AES

I have a program which uses AES-256 in CBC mode to encrypt and decrypt files. As I have quickly realized, AES will even use an incorrect passphrase to decrypt data, which leaves me with no way to ...
3
votes
1answer
69 views

Is it acceptable to write the nonce to the encrypted file during AES-256 GCM? [duplicate]

I've used AES-128 in CTR mode in the past and using the same key but different IVs for each file, I wrote the IV to the first 16 bytes. Is it safe to do so with the nonces used in AES-256 GCM? I'm ...
3
votes
1answer
512 views

How does the IV or initial counter increase internally for each block in AES CTR mode?

I am working on Intel AES-NI library and since the AES function is coded using low-level assembly instructions. I could not see how the IV or initial counter increases in CTR mode. In general, how ...
3
votes
2answers
804 views

Encrypted counter as IV in CBC mode encryption using same key

I'm currently working with a secure transport protocol that defines the IV to be a counter (incremental nonce) to be encrypted with the same key. This is a followup to a protocol that did not provide ...
3
votes
2answers
378 views

How to calculate leaked information from a check digit

Given a check digit calculated using mod 11, of an encrypted numeric sequence of 8 digits, how much information can be known about the plaintext? More specifically, a single 3DES encrypted CBC block ...
3
votes
2answers
325 views

Do I need an IV to use AES-CTR as a CSPRNG?

I'm using AES128-CTR for generating pseudo-random values, which is considered secure for up to 1MB (at least from what I've read). I simply encrypt a 128-bit little-endian counter, starting from 0. ...
3
votes
1answer
327 views

OCB - brute force against unknown IV

I read that brute force attacks against a plaintext encrypted in OCB with unkown key and IV has approximately the same complexity as an attack where only the key is unknown. Why is that ? Is there a ...
3
votes
1answer
144 views
3
votes
2answers
162 views

Whats the point of an IV if public? [duplicate]

What is the point of the initialization vector in cryptographic modes like AES-CBC when it is sent in the public? Cant any attacker just listen and reverse the IV? and as such defeating its purpose? ...
3
votes
1answer
79 views

Use of the IV for the CBC Block Cipher in TLS1.2

I'm struggling to understand at what point a message is encrypted when looking at RFC 5246. The spec gives the generic block cipher in section 6.2.3.2 as: ...
3
votes
1answer
1k views

How are IVs used in association with RSA Encryption?

How are IVs used in association with RSA Encryption? Can someone explain why we use them in this RSA context?
3
votes
1answer
812 views

Generating an IV for ESP 3DES-CBC

I have an application written in C, running in Linux. It uses IPsec (ESP) (manually putting the IPSec packet together) to send certain packets. The algorithm used ...
3
votes
1answer
37 views

Two or more initialization vectors with the same key

I'm studying about WEP and I'm in doubt. It seems that because it uses a initialization vector of 24 bits, which is relatively short, is easy to determine which key was used to encrypt the data. But ...
3
votes
1answer
135 views

Secure method of encrypting data within a database

I'm designing a program which makes queries to a database stored locally which could potentially contain a lot of sensitive information. As such the information must be kept secure as possible from ...
3
votes
1answer
494 views

Possible CPA or CCA attack when using AES-CBC mode under the following situation?

Both client and server know a shared key in advance. Both sides us EVP_BytesToKey() derive a pair of same key and same IV. Then, client and server start transferring data encrypted by AES-CBC mode ...
3
votes
1answer
241 views

Why must IV be sent with each packet?

I was reading about Encrypt-then-MAC and everywhere I go it seems people include the IV with the ciphertext generated for each message then MAC that and send all the information concatenated. Why do ...
3
votes
1answer
333 views

iOS Data Protection: What is the Input of the LFSR?

Every time a file on the data partition is created, Data Protection creates a new 256-bit key (the “per-file” key) and gives it to the hardware AES engine, which uses the key to encrypt the ...
3
votes
1answer
38 views

How are the IVs of SHA512/256 and SHA512/224 calculated?

This seems odd to me, because there are a lot of resources out there saying that the initializer values of SHA512 and SHA384 are the first 64 bits of the fractional parts of the square roots of prime ...
3
votes
0answers
103 views

How does CTR-ESSIV work?

I'm using Wikipedia and Handbook of Applied Cryptography as references. I know that ESSIV generates an initialization vector (IV) by combining a hashed key with the sector number. However, I only see ...
3
votes
0answers
72 views

How to generate initial vectors during DPA attack on stream cipher in real life?

I was trying to understand the procedure of the DPA attack on Stream cipher (like Mickey-128). I learned that, the attacker need to build hypothetical power consumption matrix with different initial ...
3
votes
0answers
62 views

CBC with random prefix but no IV - secure? [duplicate]

I'm looking at a datagram-based protocol that encrypts a payload. The payload is encrypted with AES or blowfish in CBC mode, and the result is then authenticated with a HMAC. To save space, the ...
3
votes
0answers
114 views

CBC with fixed IV but changing data [duplicate]

Possible Duplicate: Using CBC with fixed IV I am using AES in CBC mode. For some reasons I have some issues for transmiting the IV. So I am using a fixed IV. If the first 128bits of the ...
2
votes
4answers
2k views

Is my pseudo-random initialization vector secure?

How can I know if I am generating a secure pseudorandom initialization vector? Currently I am planning to generate a pseudo-random initialization Vector using current date and time - is this secure ...
2
votes
1answer
131 views

Guessing the IV for CBC

If I have the key, the ciphertext under AES-CBC and the plaintext, then how can I guess the initialisation vector?
2
votes
2answers
479 views

Is it safe to reuse a symmetric key when using asymmetric encryption?

I've written a C# Library that I hope will be used for security purposes in a commercial application. The application will communicate through the internet and not on an internal network. I am using ...
2
votes
3answers
2k views

Problems with using AES Key as IV in CBC-Mode

I'm a pentester and currently analysing a web application which are using some strange encryption scheme. The point is: They encrypt using AES-128, generate a (not cryptographic secure) key and use ...
2
votes
2answers
348 views

Is the Blum Blum Shub PRNG suitable to create initialization vectors?

Is it a good idea to use a Blum Blum Shub Generator to create my initialization Vector (IV) in AES-OFB (Output Feedback Mode)?
2
votes
1answer
394 views

Why restrict nonce/IV and counter to specific sizes?

When setting up a nonce/IV and counter (e.g. for AES-GCM-128), why are the nonce/IV and counter restricted to specific sections (e.g. random nonce/IV in first 8 bytes and counter in last 8 bytes)? ...
2
votes
1answer
182 views

Does an attacker gain an advantage if they have the initialisation vector?

Does an attacker gain any advantage by knowing which initialisation vector was used for encryption?
2
votes
3answers
280 views

How to renew keys for a statically-encrypted database

Preamble Before I ask this question, please accept that I fully understand that 'rolling your own' is never a good idea, and that I am a relative n00b. The only reason I am doing this the way I am is ...
2
votes
1answer
38 views

Can one passively load-balance HTTPS traffic based on TLS SNI?

Is it theoretically possible to passively snoop into the HTTPS traffic, reliably detect whether or not TLS SNI is attempted to be used by the client, and, if it is, redirect the stream of the ...
2
votes
2answers
109 views

Why is ECIES complex?

Wouldn't encrypting a message with AES, then encrypting the (randomly generated) AES key and IV with the EC public key suffice? What attack vectors does ECIES protect against, that an ...
2
votes
1answer
1k views

How good is using AES CTR mode with initial counter as 0?

Is it advisable to use AES CTR mode with the counter initialized to 0? How good is it in security terms?
2
votes
2answers
401 views

IV Security Clarification

After doing lots of reading on SO and other websites relating to AES cryptography, I am trying to understand the security issues surrounding IV's. There seems to be a lot of confusion and ...
2
votes
1answer
164 views

Format of NONCE in Initialization Vector (IV)

When we talk about a Number used ONCE (NONCE) in Initialization Vector (IV), is it required to use numbers only? Is is possible to use letters or special characters?
2
votes
1answer
1k views

How does Output Feedback mode use the initialization vector?

How can I process Initialization Vector inside the Block Cipher Encryption box (using for example AES) together with the Key? Will I encrypt the Initialization Vector like a block of plaintext? So ...
2
votes
1answer
70 views

Using scrypt to generate key + IV/nonce together

Is there any security issue in using scrypt for Key + IV/nonce generation? In other words, can I safely use only a salt for scrypt and derive the nonce along with the key? For example: I have data I ...
2
votes
2answers
442 views

Generating IV in TLS 1.2

I'm writing a TLS 1.2 implementation (in C#) using a custom protocol. My question is how to generate the IV attached to each message, I don't want to use RandonNumberGenerator because I've heard it ...
2
votes
1answer
247 views

Can prepending “junk” be equivalent to an IV when encrypting using CBC?

We are encrypting a small positive integer (1-1000) with a constant key using AES256 encryption. We are considering two approaches to make this secure; use an initial vector (which we then need to ...
2
votes
1answer
1k views

Generating a strong unique Initialization Vector

How can I determine if I am generating a unique and strong Initialization Vector? If my mode is generating Keystream? Is there any scientific explanation in generating a unique and strong ...