ways of applying a block cipher to multi-block messages and enabling repeated use without changing the key.

learn more… | top users | synonyms

9
votes
1answer
678 views

What is wrong with AES-CTR-HMAC-SHA256 - or why is it not in TLS?

It seems the only specified CTR mode ciphers in TLS are all GCM based. GCM ciphers run AES-CTR and do authenticated encryption with a MAC based on Galois-field ...
4
votes
3answers
303 views

What is the difference between a 'cipher' and a 'mode of operation'?

What is the difference between the term cipher (a name like RIJNDAEL) and mode of operation (like ECB)? Aren't these both terms for the encryption/decryption technique?
4
votes
2answers
286 views

What (precisely) is a block cipher?

If I follow the wikipedia or crypto.stackexchange definition, any simple XOR encryption where the key is as long as the plain text should qualify as a secure block cipher. Now I thought what would ...
9
votes
2answers
2k views

Practical disadvantages of GCM mode encryption

It seems that GCM mode encryption has a clear advantage over CBC + HMAC in the sense that it only requires a single key. But it seems that there are some experts here that do not trust it enough to ...
2
votes
1answer
455 views

AES with different modes of operation

I'm taking up a cryptography class and this is for an assignment. We're asked to find the differences between AES/RSA in the different modes of operation vs the one timepad method. From wiki, I can ...
2
votes
1answer
143 views

Camellia cipher - is it a symmetric or asymmetric cipher?

I read a wiki page about Camellia cipher and know that it is a block cipher that can use 128-bit, 192-bit or 256-bit keys. But I cant find any information about if its a symmetric cipher (uses one key ...
2
votes
1answer
196 views

Is this method of deterministically using CBC secure?

I'm trying to design a deterministic encryption scheme to enable searching in untrusted databases with the smallest possible IV overhead on ciphertexts. I know it's very bad practice but unfortunately ...
4
votes
1answer
192 views

Swapping Key and IV in AES? Safe?

I have an application where I want to be able to send an encrypted file, and then mete out "keys" that allow the receipient to decrypt the file from a certain point to the end of the file. Actually, ...
5
votes
1answer
422 views

Authenticated encryption mode for stream cipher?

E. g. block ciphers have GCM or OCB, that take single cryptographic primitive (block cipher) and provide both authentication and encryption. Are there similar constructs for stream ciphers, which ...
6
votes
1answer
548 views

Practical uses of Manipulation Detection Code (MDC) and IGE

I've just skimmed over most of the paper "On Message Integrity in Symmetric Encryption". I've included (the last) part of the abstract below: We show that generic compositions of ...
4
votes
2answers
287 views

CTR mode nonce with aggressive key rotation policy

I'm writing a small encryption library which will be required to use the shortest possible amount of overhead for describing ciphertexts. I want to use CTR mode with a 6-byte random nonce. Normally ...
3
votes
2answers
91 views

Can CBC-encrypted files be modified in-place?

When changing a (small) part of the plaintext of a CBC-encrypted file, how much of the file will have to be rewritten? My suspicion is that everything after the modified block will have to be ...
4
votes
2answers
194 views

Why is it said that if we have a duplicate ciphertext block it can leak our information?

I have been recently going through a question: http://security.stackexchange.com/questions/15767/what-do-key-size-and-block-size-mean-in-cryptography and it created in me a series of doubts. Referring ...
3
votes
0answers
55 views

CBC with random prefix but no IV - secure? [duplicate]

I'm looking at a datagram-based protocol that encrypts a payload. The payload is encrypted with AES or blowfish in CBC mode, and the result is then authenticated with a HMAC. To save space, the ...
21
votes
1answer
14k views

What is the difference between PKCS#5 padding and PKCS#7 padding

One runtime platform provides an API that supplies PKCS#5 padding for block cipher modes such as ECB and CBC. These modes have been defined for the triple DES, AES and Blowfish block ciphers. The ...
4
votes
2answers
91 views

Is it possible to insert a key derivation function when using EAX?

I am currently investigating use of EAX mode for a dedicated application and following useful clarifications received from my previous post , to consider according to my applicable input security ...
4
votes
1answer
146 views

Does EAX use the same keys for encryption and authentication?

I am actually checking use of EAX AEAD mode, and following EAX spec review (scheme definition for my part), my question is: what about the derivation of the authentication and encryption keys? In the ...
1
vote
0answers
333 views

Non-malleable file encryption using AES XTS 256?

I'm looking to do file encryption of a bunch of individual files, some small, some quite large. The files will be write-once/read-many, so I could use CBC, however, since the read-access needs to ...
1
vote
1answer
115 views

How to build a secure AE scheme with generic composition?

I am actually looking for using a secure Encrypt-Then-MAC AE scheme , and consider using either an existing "ready-to-use" dedicated AEAD mode (GCM, OCB, CCM, EAX, etc ..) or an alternate composed ...
4
votes
1answer
405 views

Has GMAC mode a future outside GCM?

Once gcm has been implemented for providing both encryption & authentication solution , it appears obvious to consider that such implementation can also provide (if required by new user) a Mac ...
3
votes
1answer
647 views

Security of authenticated encryption modes gcm & ccm

I have two questions for Clarification for AE mode choice criteria GCM : it appears to be actually the most popular and widely used AE mode of operation. however it is also well-known to be highly ...
3
votes
1answer
432 views

How much data can I encrypt with AES before I need to change the key in CBC mode?

In my cryptography class, the instructor suggested that in order to give the attacker a minimal advantage of $1/2^{32}$, we have to change the key after $2^{48}$ blocks are encrypted. It seems that ...
5
votes
2answers
2k views

AES plaintext is smaller than 128 bits - how to expand?

We are currently developing a little AES implementation in a crypto-course at university. As far as I know, AES uses a 128 bit block length, so all data that will be encrypted gets split up into ...
1
vote
2answers
151 views

Do I need to know the “mode of operation” to decrypt a message encrypted with a block cipher?

If I have received an AES encrypted message, and if I do know the key with which it was encrypted, do I also need to know the mode of operation with which it was encrypted in order to decrypt it? My ...
6
votes
1answer
309 views

Single-purpose symmetric encryption scheme for single files

I'm writing a simple password manager program that will encrypt/decrypt a single file (it's size will most likely stay under a few K). This is my initial file format design: ...
1
vote
1answer
379 views

Partial decryption of large file in AES-GCM (or other modes)?

Lets assume a 4gig file that is internally made of 1 million pages of 4k bytes each (page). the file was originally AES-GCM encrypted these pages (or entire file) lives across the internet i.e. ...
1
vote
1answer
176 views

Is there an efficient way to hide the encrypted plaintext length with a block cipher?

In block cipher modes of operation for encryption on input of a plaintext of $N$ blocks (We assume that the input size is always a multiple of the blockcipher mode: $N·16$ bytes) the size of the ...
7
votes
3answers
648 views

Is this encryption algorithm build from MD5 secure?

I'm being asked to use an encryption algorithm in my code, and besides the fact that I'm sure there will be implementation faults that lead to vulnerabilities, I also have concerns about the algorithm ...
1
vote
2answers
225 views

Why nobody considers counter re-keying as a standard Block Cipher Mode?

One of the simplest possible cipher modes is setting each successive key as a function F of the previous one. ...
3
votes
1answer
406 views

Symmetric encryption mode where ciphertext size is plain text size

I've had many questions on Stackoverflow on how to minimize the output of a cipher - during encryption of course - to the same size as the input. Obviously this is possible for a single block of ...
11
votes
1answer
4k views

Compare Blockmode CBC (with diffuser) against XTS

I have some problems in understanding the "advantage" of AES-XTS compared to CBC with diffuser. I read something about FileVault, in this paper they mention the two modes of operations XTS and CBC ...
2
votes
2answers
273 views

What cipher mode is suitable for independantly decryptable short messages?

I'm building a small VoIP client which transmits encrypted audio data via UDP, and some packet loss is expected, so each packet will need to be decrypted separately even if others in the stream don't ...
7
votes
2answers
240 views

Will varying plaintext compensate for a fixed initialisation vector?

This is a follow-up question to Relative merits of AES ECB and CBC modes for securing data at rest. I need to store encrypted Personal Account Numbers (PANs) in a database. The only encryption option ...
11
votes
5answers
2k views

Using CBC with a fixed IV and a random first plaintext block

What if, instead of using CBC mode in the normal way with a random IV, I used this approach: Use a fixed IV (like a block of 0's). Before encrypting, generate a random block and prepend it to the ...
6
votes
1answer
333 views

Why doesn't CTR mode require blocking?

I've been reading a bit about block cipher modes and I have a relatively straightforward question regarding CTR. In essence, I was hoping you guys would be kind enough to validate my understanding of ...
4
votes
1answer
3k views

Why, or when, to use an Initialization Vector?

i'm trying to figure out when an Intialization Vector (IV) should be used. There are anecdotal reports that WEP was broken because of weak IV's. It's also claimed that if two pieces of plaintext are ...
5
votes
2answers
3k views

Is AES in CBC mode secure if a known and/or fixed IV is used?

I have a need to encrypt credentials for a third-party app used by a secured internal app. Over on ITSec.SE, I was helpfully shown a scheme to encrypt the third-party credentials based on a hash of ...
2
votes
2answers
1k views

Difference in one time key and one time pad and many time key

These terms are confusing me. One time pad is when you use one key for one message. That is what One time key is. Secondly, what is the connection of many time key, can i use one time pad many ...
11
votes
2answers
2k views

Is using a predictable IV with CFB mode safe or not?

While writing this answer, I noted that NIST SP 800-38A says that (emphasis mine): "For the CBC and CFB modes, the IVs must be unpredictable. In particular, for any given plaintext, it must not be ...
4
votes
4answers
615 views

Which block cipher modes of operation allow a predictable IV?

Recently I found out that in the modes CBC and PCBC the IV may be passed in cleartext but never must be predictable. However for this part of my app I rather have the IV be predictable and unique ...
5
votes
2answers
2k views

Replay attack in ECB mode

How do replay attacks work in ECB mode? I found this in Wikipedia: "ECB mode can also make protocols without integrity protection even more susceptible to replay attacks, since each block gets ...
6
votes
2answers
145 views

Abstracting primitives and modes of operation

I am developing a symmetric crypto library and have reached a roadblock. Looking at block ciphers, it is quite obvious that all block ciphers are trivially abstractable as a simple primitive ...
4
votes
3answers
1k views

Why does CBC decryption with a wrong IV still give readable results?

While developing some code that uses the .NET AesManaged algorithm, I made some mistakes but was surprised at the results. My encryption was correct. I was generating a random IV block and writing ...
-1
votes
1answer
442 views

File Encryption/Decryption in ECB mode [duplicate]

Possible Duplicate: Removing Padded Value in Decrypted Message I tried to encrypt and decrypt a file in ECB mode using AES Algorithm but I encountered one problem during decryption, I don't ...
2
votes
4answers
1k views

Is my pseudo-random initialization vector secure?

How can I know if I am generating a secure pseudorandom initialization vector? Currently I am planning to generate a pseudo-random initialization Vector using current date and time - is this secure ...
6
votes
3answers
2k views

Encryption with “constant” initialization vector considered harmful

I try to get the full reasoning behind the above statement. First, after reading articles here and at wikipedia i understand that using an IV only once is good practice. For stream ciphers not doing ...
6
votes
1answer
856 views

How can disk encryption systems (like Truecrypt) resist frequency analysis when they allow random access?

I don't understand how disk encryption (e.g. TrueCrypt) is supposed to resist frequency analysis. If blocks can be randomly accessed (which they can), doesn't that mean that frequency-domain ...
1
vote
3answers
934 views

Which attacks can be avoided by the use of OFB instead of ECB?

For a file encryption program, I was told to use Output Feedback mode (OFB) instead of ECB (Electronic code book) mode. Which attacks can I avoid by this choice?
1
vote
2answers
366 views

Complexity of ECB and OFB

What is the complexity of ECB in terms of Time and Memory? and also in OFB? I can't find it in the internet, so I decided to ask it in here.
2
votes
1answer
755 views

How does Output Feedback mode use the initialization vector?

How can I process Initialization Vector inside the Block Cipher Encryption box (using for example AES) together with the Key? Will I encrypt the Initialization Vector like a block of plaintext? So ...