ways of applying a block cipher to multi-block messages and enabling repeated use without changing the key.

learn more… | top users | synonyms

4
votes
4answers
679 views

Which block cipher modes of operation allow a predictable IV?

Recently I found out that in the modes CBC and PCBC the IV may be passed in cleartext but never must be predictable. However for this part of my app I rather have the IV be predictable and unique ...
4
votes
2answers
121 views

Implementing CBC Encryption Using Decryption

I've implemented this algorithm, which, working from the end of the message backwards, creates a valid CBC ciphertext from any plaintext, using the block cipher's decryption operation instead of the ...
4
votes
1answer
90 views

Authenticating Very Short (Sub-Block) Data

If I'm encrypting very short/small data - like an int or a long (32 or 64 bits), does it make any sense to authenticate the ciphertext, when using an "online" mode of operation (like EAX)? ...
4
votes
3answers
2k views

Why does CBC decryption with a wrong IV still give readable results?

While developing some code that uses the .NET AesManaged algorithm, I made some mistakes but was surprised at the results. My encryption was correct. I was generating a random IV block and writing ...
4
votes
1answer
135 views

What's the consequence of having a short IV? Is one mode better in that case?

I've read lots about null-length IVs being bad for most modes. In a scenario where passing a 128-bit IV along with each message isn't feasible, how would generating the IV from a smaller passed-along ...
4
votes
2answers
349 views

What (precisely) is a block cipher?

If I follow the wikipedia or crypto.stackexchange definition, any simple XOR encryption where the key is as long as the plain text should qualify as a secure block cipher. Now I thought what would ...
4
votes
2answers
325 views

CTR mode nonce with aggressive key rotation policy

I'm writing a small encryption library which will be required to use the shortest possible amount of overhead for describing ciphertexts. I want to use CTR mode with a 6-byte random nonce. Normally ...
4
votes
2answers
94 views

Is it possible to insert a key derivation function when using EAX?

I am currently investigating use of EAX mode for a dedicated application and following useful clarifications received from my previous post , to consider according to my applicable input security ...
4
votes
1answer
161 views

Does EAX use the same keys for encryption and authentication?

I am actually checking use of EAX AEAD mode, and following EAX spec review (scheme definition for my part), my question is: what about the derivation of the authentication and encryption keys? In the ...
4
votes
1answer
579 views

Has GMAC mode a future outside GCM?

Once gcm has been implemented for providing both encryption & authentication solution , it appears obvious to consider that such implementation can also provide (if required by new user) a Mac ...
4
votes
1answer
3k views

Why, or when, to use an Initialization Vector?

i'm trying to figure out when an Intialization Vector (IV) should be used. There are anecdotal reports that WEP was broken because of weak IV's. It's also claimed that if two pieces of plaintext are ...
4
votes
1answer
153 views

GCM: Math behind update of AAD after ciphertext has been processed

In the Bouncy Castle libraries, the GCM cipher implementation has an interesting property that does not seem described in the GCM papers (neither the NIST or the original paper): Some AAD was sent ...
4
votes
1answer
818 views

GCM vs CTR+HMAC tradeoffs

So these days I see everyone using AES-GCM. What are its advantages over simple CTR+HMAC modes? Is it speed? Or ciphertext length? And what are the security tradeoffs, both in terms of practical ...
4
votes
1answer
220 views

Swapping Key and IV in AES? Safe?

I have an application where I want to be able to send an encrypted file, and then mete out "keys" that allow the receipient to decrypt the file from a certain point to the end of the file. Actually, ...
4
votes
1answer
152 views

How do I decide what mode to use?

I'll be using AES from OpenSSL. I understand why I don't want to use ECB from reading pages like this Wikipedia article, which has a great example of what happens when you attempt to encrypt with ...
4
votes
1answer
286 views

Undecrypt using the OpenSSL EVP API?

I'm writing a client-server encryption scheme for homework, and I've stumbled upon what might be a fatal blow to my current implementation. When using AES-256-CBC on the two sides, it's important ...
4
votes
1answer
143 views

Parallelization of CFB mode encryption and decryption

While reading Evaluation of Some Blockcipher Modes of Operation by Rogaway (someone just linked it somewhere), I noticed two claims about CFB that I'm not sure I understand: Regarding whether CFB ...
4
votes
1answer
99 views

OCB and GCM security

Is OCB as secure as GCM or CCM ? Since OCB design is quite different from GCM and CCM, I was wondering if the security properties of these latters are satisfied by OCB, as well. Thank you.
3
votes
3answers
551 views

Is there any area where AES-CBC cannot be used ? If so, why ?

I would like to know the domains or specific applications where using AES-CBC is not advised due to any drawbacks like sequential encryption of AES-CBC ?
3
votes
2answers
397 views

AES-ECB as an authentication mechanism

ECB is considered to be insecure when used for confidentiality because identical plaintext result with identical ciphertext. But what if we use ECB for authentication? Assume A wants to transmit an ...
3
votes
2answers
457 views

How can I encrypt more than 64 bit with the Data Encryption Standard?

The Data Encryption Algorithm is designed to encipher and decipher blocks of data consisting of 64 bits under control of a 56-bit key. If my data is more than 64 bits, (suppose 66 or 67 bits), will ...
3
votes
2answers
236 views

Why isn't CTR mode (counter mode) used more often?

For the CTR mode, the design is good for parallelization, yes, it seems the benchmark of the program downloaded from crypto++ proves that on an Intel I7 CPU. My question is that as most of CPU on ...
3
votes
2answers
94 views

Can CBC-encrypted files be modified in-place?

When changing a (small) part of the plaintext of a CBC-encrypted file, how much of the file will have to be rewritten? My suspicion is that everything after the modified block will have to be ...
3
votes
2answers
106 views

Turning a 64 bit block cipher into a 128 bit block cipher

There are quite a few block cipher modes of operation that require 128 bits. There are also modes of operation where a higher block size than 128, e.g. a block size of 256 bit would even be practical. ...
3
votes
1answer
513 views

How much data can I encrypt with AES before I need to change the key in CBC mode?

In my cryptography class, the instructor suggested that in order to give the attacker a minimal advantage of $1/2^{32}$, we have to change the key after $2^{48}$ blocks are encrypted. It seems that ...
3
votes
2answers
180 views

Encryption for a short packet size

I have an 8051 microcontroller with a radio that can send packets with up to 32 bytes and I want to have the messages encrypted. It is a sensor network so I really only want to send one packet per ...
3
votes
2answers
118 views

How do I construct variable length input (VIL) in a block cipher mode?

I've just been skimming NIST's "Five Confidentiality Modes". I understand those block cipher modes are used to securely encrypt input longer that the block cipher length. However, the common block ...
3
votes
1answer
499 views

Symmetric encryption mode where ciphertext size is plain text size

I've had many questions on Stackoverflow on how to minimize the output of a cipher - during encryption of course - to the same size as the input. Obviously this is possible for a single block of ...
3
votes
1answer
275 views

OCB - brute force against unknown IV

I read that brute force attacks against a plaintext encrypted in OCB with unkown key and IV has approximately the same complexity as an attack where only the key is unknown. Why is that ? Is there a ...
3
votes
1answer
107 views

Galois field step in XEX mode

I'm reading through the XEX mode spec, and I want to make sure I've understood the $\alpha^j$ step correctly: $X = E_K(I) \oplus \alpha^j$ $C = E_K(M \oplus X) \oplus X$ where: $M$ is the ...
3
votes
1answer
115 views

Block Cipher Mode Amicable to Fast Key Change/Rotation Like XOR?

I'm working with documents encrypted in long term storage. When a client requests the document, the document should be delivered encrypted under a distinct key (distinct from the long term storage ...
3
votes
1answer
168 views

What “Tag Length” should be used for the EAX MAC?

Since EAX is very flexible with regard to the length of the calculated MAC (what they call "tag" is the MAC value right?), and the EAX paper as well as other documentations carefully avoid suggesting ...
3
votes
1answer
235 views

Can XEX or XTS modes be used with only one tweak?

XEX Mode (with two tweaks) is the following scheme: $X = E_{k}(I) \otimes \alpha^j \\ C = E_{K}(P \oplus X) \oplus X$ where $I$ and $j$ are both tweaks (sector number and block number respectively). ...
3
votes
1answer
805 views

Security of authenticated encryption modes gcm & ccm

I have two questions for Clarification for AE mode choice criteria GCM : it appears to be actually the most popular and widely used AE mode of operation. however it is also well-known to be highly ...
3
votes
0answers
89 views

Streaming mode of operation that is more resistant against nonce reuse

Is it possible to create a streaming mode of operation where the reuse of a nonce does not destroy confidentiality? In this question it would be allowed for the streaming mode to leak if ciphertexts ...
3
votes
0answers
226 views

Increasing the diffusion of the AES-CBC encryption algorithm in pycrypto for python

When encryption is done using the AES-CBC algorithm, the encryption can be thought of as chaining the cipher texts with the previous ones and an IV. However, if its on CBC mode, we give our cipher ...
3
votes
0answers
57 views

CBC with random prefix but no IV - secure? [duplicate]

I'm looking at a datagram-based protocol that encrypts a payload. The payload is encrypted with AES or blowfish in CBC mode, and the result is then authenticated with a HMAC. To save space, the ...
2
votes
3answers
470 views

Does AES CTR mode store header information in encrypted files?

According to the movable-type.co.uk website, In the ‘counter mode’ used in this implementation, a counter which changes with each block is first encrypted, and the result is bitwise xor’d with the ...
2
votes
4answers
1k views

Is my pseudo-random initialization vector secure?

How can I know if I am generating a secure pseudorandom initialization vector? Currently I am planning to generate a pseudo-random initialization Vector using current date and time - is this secure ...
2
votes
2answers
7k views

Cipher Feedback Mode

I can't understand what CFB really is. It said in Wikipedia that CFB is same as CBC, but I find that CFB is more difficult than CBC. Can someone explain to me how CFB works. Such as how ...
2
votes
2answers
321 views

What cipher mode is suitable for independantly decryptable short messages?

I'm building a small VoIP client which transmits encrypted audio data via UDP, and some packet loss is expected, so each packet will need to be decrypted separately even if others in the stream don't ...
2
votes
2answers
1k views

Why do some block cipher modes of operation only use encryption while others use both encryption and decryption?

In Chapter 6, Question 6.8, of his book “Cryptography and Network Security Principles and Practices”, William Stalling asks: Why do some block cipher modes of operation only use encryption while ...
2
votes
1answer
362 views

Is it possible to split a large AES encrypted string and decrypt the parts one by one?

Due to some platform restrictions our decryption algorithm can only handle up to 1 million bytes. The string we receive is larger, having been generated by AES in cipher block chaining (CBC) mode, ...
2
votes
1answer
151 views

Camellia cipher - is it a symmetric or asymmetric cipher?

I read a wiki page about Camellia cipher and know that it is a block cipher that can use 128-bit, 192-bit or 256-bit keys. But I cant find any information about if its a symmetric cipher (uses one key ...
2
votes
1answer
125 views

What is the use of segments in Cipher Feedback Mode (CFB)

In NIST SP800-38A: Recommendation for Block Cipher Modes of Operation CFB can be used with a parameter s - the size of a data segment in bits - which determines the ...
2
votes
1answer
662 views

How can AES be considered secure when encrypting large files?

Why is AES considered to be secure when encrypting large files since the algorithm is a block cipher? I mean, if the file is larger than the block size, the file will be broken down to fit the ...
2
votes
1answer
522 views

AES with different modes of operation

I'm taking up a cryptography class and this is for an assignment. We're asked to find the differences between AES/RSA in the different modes of operation vs the one timepad method. From wiki, I can ...
2
votes
1answer
902 views

How does Output Feedback mode use the initialization vector?

How can I process Initialization Vector inside the Block Cipher Encryption box (using for example AES) together with the Key? Will I encrypt the Initialization Vector like a block of plaintext? So ...
2
votes
1answer
147 views

Modes of encryption for hard drives?

What are the currently recommended modes of encryption for large disks? Basic requirements would seem to be that you can update an encrypted sector independently of others, which rules out most ...
2
votes
1answer
70 views

Can IGE mode be parallelized?

As far as I know, in IGE mode (infinite garble extension) each block depends on the previous one. In that case, can the encryption be parallelized? Is there some way to do it?