A reference request is a request to be provided with (links to) documentation, official papers, and specs related to one or more specific algorithms or cryptographic procedures, to provide a trusted base for what's being said or written.

learn more… | top users | synonyms

16
votes
1answer
607 views

What exactly is the base for the KECCAK (SHA3) claim that a security strength of 256 bits is “post-quantum sufficient”?

On page 14 of "Keccak and the SHA-3 Standardization" (February 6, 2013) it says: Instantiation of a sponge function the permutation KECCAK-f 7 permutations: b → ...
10
votes
3answers
656 views

Bitcoin Research

I have recently been assigned to advise a student on a senior thesis in math. She has taken linear algebra, introductory real analysis, basic cryptography, and abstract algebra. Her interest is in ...
10
votes
7answers
2k views

How exactly is “true randomness” defined in the realms of cryptography?

Especially in relation to stream ciphers, I frequently read about (sometimes theoretical, sometimes practical) attacks that are able to "distinguish a ciphertext from a truly random stream". What's ...
10
votes
0answers
511 views

Who first published the interest of more than two prime factors in RSA?

Multi-prime RSA is now a well known technique: it uses $k>2$ distinct secret prime factors in the public RSA modulus, with the advantage that, using the CRT, we can gain a speed boost in ...
9
votes
3answers
3k views

Is secp256r1 more secure than secp256k1?

Curves secp256r1 and secp256k1 are both examples of two eliptic curves used in various asymmetric cryptography. Googling for these shows most of the top results are Bitcoin related. I've heard the ...
9
votes
3answers
838 views

Elliptic Curves of different forms

Looking at http://safecurves.cr.yp.to/ to find a safe curve, I find that most curves described here are of a different form from that generally used. In Bouncy Castle, for example, ...
8
votes
2answers
750 views

When using Curve25519, why does the private key always have a fixed bit at 2^254?

When using Curve25519, the private key always seems to have a fixed bit set at position 2^254. Why is that? Is there any good reason to use a fixed positioned most-significant-bit in the private key? ...
8
votes
2answers
896 views

Has threefish successfully been attacked (practically or theoretically)?

Reading Schneier's "The Doghouse: Crypteto" dated September 30, 2009, I noticed Bruce Schneier stating: Threefish, the block cipher inside Skein, encrypts data at 7.6 clock cycles/byte with a ...
8
votes
2answers
1k views

Webcam random number generator

I have a question about random number generators. I have read from a real random number generator, based on a webcam ("randcam"). My problem is, that I do not really understand how the generation of ...
8
votes
2answers
381 views

What current authenticated key exchange standards exist?

If neither of the 'big two' of TLS Handshake and IKE are appropriate in a given situation, what alternative Authenticated Key Exchange (AKE) standards exist and are recommended? Many protocols have ...
7
votes
2answers
359 views

How to do a literature search

How do I do a literature search of the research literature on cryptography? Assume there's some topic in cryptography I'd like to learn more about; how do I search the cryptographic research ...
7
votes
2answers
581 views

Implement deniable encryption with AES/RSA

I'm on a crypto app using OpenSSL (I'm more an implementer/cryptographer than a cryptologist), mainly as a hobby, for now. My app will be able to encrypt a file (not a container) with symmetric or ...
7
votes
1answer
182 views

Is there any general description language for block ciphers?

In page 9 (16 in the PDF) of Final report of European project IST-1999-12324 (NESSIE), it is mentioned that: The NESSIE project is also developing a new generic tool to analyze block ciphers ...
7
votes
2answers
84 views

Why develop Edward curve formulas that deviate from unification?

Edward curves were considered initially because they provide a unified formula for both doubling and addition, thus having inherent side-channel resistance. But a lot of work has been done recently ...
6
votes
4answers
735 views

Is the logic for how the enigma machine worked documented somewhere?

I know that there is a formula to calculate the result of any input but is the logic of how the machine actually worked documented? I have seen schematics for the circuitry and even a how to make ...
6
votes
3answers
484 views

Is there a string that's hash is equal to itself?

I was wondering if there's any string that has a hash equal to itself, so that – when using any (none specific) hash function – the hash would be equal to that string? so that: ...
6
votes
1answer
261 views

How can uniformity of hash functions (e.g. SHA-256) be proved?

In reading about the Bitcoin protocol I noticed how much its proofs-of-work apparently depend on uniformity of the SHA-256 hash function. And so presumably do many other applications. How do ...
6
votes
1answer
517 views

Keccak padding implementation, and bit ordering

I am trying to implement Keccak in Java for my school work. And I am getting stuck in two places: On the summary page the padding is shown as P = M || 0x01 || 0x00 || … || 0x00 P = P xor ...
6
votes
1answer
160 views

What's the state of the attack to get the first pre-image on MD4?

What's the state of the attack to get the first pre-image on MD4? Is it still $2^{102}$ as described by Gaëtan Leurent in "MD4 is Not One-Way" ?
5
votes
2answers
3k views

Does SHA-1024 hash exist?

Does SHA-1024 cryptographic hash function exist similarly to SHA-512? If not, what's the reason for that? Links: SHA-2 at Wikipedia
5
votes
1answer
692 views

How much entropy is lost via hashing when you add known or low entropy data?

(I updated the title, as I think there was some confusion as to the question) Here's the question: For example, if I have a bit stream that is 64K bytes long and there is about 16 *8 bits worth of ...
5
votes
2answers
150 views

ML/NN Cryptanalysis

Is it computationally plausible to use NN/ML to do any of the following tasks? "Real" cryptanalysis. Cyclic neural networks for extended computation, but break the hash all the way through. ...
5
votes
1answer
78 views

What was the NSA's reasoning for making their bitwise combination functions in SHA-1 the way they did?

I know that these functions are there to actually make the program work. What I want to know is why they made the functions one way but not another. For example, why did they pick F1(B, C, D) = (B ...
5
votes
1answer
685 views

Description of signatures with message recovery (as in ISO/IEC 9796-2 and EMV Signatures)

I'd like to get an overview of how the signatures with message recovery work, especially in case EMV and other smart card systems. Is there a nice overview available without being required to read the ...
5
votes
3answers
527 views

Security proofs for CBC mode

I'm looking for different approaches to proofs for the security of CBC mode encryption. What are the best sources of information about this subject?
5
votes
2answers
285 views

Encryption of small messages

Some time ago, I asked how to encrypt small messages like e.g., four decimal digit numbers (banking PINs). I've got my answer, but also a warning like it makes no sense as it's easy to guess: Even ...
5
votes
1answer
111 views

What is “witness encryption”?

I recently skimmed over tho papers on time-lock encryption: “Time-release Protocol from Bitcoin and Witness Encryption for SAT” by Liu, Garcia, and Ryan “How to Build Time-Lock Encryption” by Jager ...
5
votes
1answer
160 views

Is SRP post-quantum secure?

Is SRP-6a post-quantum secure? If it is not post-quantum secure, do any post-quantum secure alternatives similar to SRP-6a exist?
5
votes
1answer
205 views

Side-channel attacks against ECDH for Weierstrass normal form curves

I hear a lot about why Montgomery curves are used in ECC, and one reason is that the same algorithm can be used to do both point addition and doubling (this is not true for the Weierstrass normal ...
5
votes
1answer
90 views

What is degree of randomness in individual bits of MD5 hash?

I am researching on Hashing Algorithms and would like to know if we take individual bits of MD5, say we take first 8 bits or any random 8 bits of MD5 then what is the randomness probability of having ...
5
votes
1answer
335 views

Adi Shamir's secret database of all primes

I was going through these presentation slides (PDF) on Crypto 2013. It summarizes the paper, Factoring RSA keys from certified smart cards: Coppersmith in the wild. In the last slide, it was ...
5
votes
1answer
149 views

Difference between “ECDH with cofactor key” and “ECDH without cofactor key”?

I need to use “ECDH with a cofactor key” for generating symmetric key. I have a fair idea on how ECDH works, but I don’t understand the cofactor part. What is the difference between ”ECDH with a ...
5
votes
0answers
23 views

What is the original SKID3 protocol?

While searching for a mutual authentication protocol I often stumbled upon SKID3. However I encountered different variations of it. The basic structure is the following: (1) A --> B: rA (2) B --> ...
4
votes
4answers
502 views

Why $n=pq$ with $p=2p'+1$ and $q=2q'+1$ instead of just $n=p'q'$ for RSA crypto?

For RSA cryptography, we know that the modulo $n$ is a product of two big prime numbers(say $p$ and $q$). However, in some documents I see an extension of $p=2p'+1$ and $q=2q'+1$ with $q'$ and $p'$ ...
4
votes
3answers
443 views

Can I create a fixed length output from a fixed length input?

I use AES256 for various purposes in my app. However, the purpose I am now trying to achieve is the following: Input is for example AU00000001 and I would like a ...
4
votes
1answer
325 views

Is knowing the private key of RSA equivalent to the factorization of $N$?

Given the RSA modulus $N$ the fastest method to factor it is of sub-exponent order. But, now if I know the private key $d$ of RSA, does that mean I can factor $N$ efficiently?. It intuitively seems ...
4
votes
3answers
5k views

What algorithm could/should be used to encrypt files for storage on untrusted servers?

I need an encryption algorithm that works fast on large files and doesn't increase the file size. It should use a key to encrypt/decrypt data. The files will be sent using REST and over HTTPS, but a ...
4
votes
2answers
581 views

Is there a standard way to use a nonce with HMAC?

Many protocols use HMAC on messages that include a nonce, but they don't seem to do it in a consistent way. For example, in OAuth the nonce is in the middle of an URL-encoded key-value string, like ...
4
votes
2answers
449 views

Update to “Cryptographic Right Answers”

I'm a big fan of Colin Percival's "Cryptographic Right Answers" post. This was written in 2009, which is a long time ago in Internet years. Is the advice still valid or, if not, can someone point me ...
4
votes
2answers
197 views

Combining two keys

What is the most secure way to combine two "random" keys X of size k (k ≤ 512 bits) and Y of size 512 bits in one key Z of size k? Result Z will be used for encryption/decryption with various ...
4
votes
3answers
283 views

Encrypting text file line by line with stable encryption

I want to store files in a secure manner (i.e. no one should be able to decrypt the contents of the file without the secret key) but I also want a diff tool to be able to show me which lines changed ...
4
votes
1answer
132 views

Generating unsigned, bounded random value using signed bounded random values

Use case: I have a random number generator that can generate random numbers in a range that is limited by a number $x$, say $x$ ranges from $2$ to $2^{(n - 1)} - 1$ exclusive. In this case $n$ is ...
4
votes
1answer
2k views

What is “Implicit Authentication”?

What is “Implicit Authentication” in the context of authentication methods? I searched the Web but could not find any article that describes this. If anyone can describe it, that would be a great ...
4
votes
2answers
168 views

Use cases for “online” authenticated encryption?

What is the the point of an "online" mode for an authenticated cipher? I understand what "online" means in this context. However, I have trouble coming up with applications that would benefit from ...
4
votes
1answer
75 views

What is the Geometric Generalised T' Method?

This page by Nicolas T. Courtois mentions Geometric Generalised T' Method. It is described as an advanced geometric algorithm, never published, for finding extra linearly independent equations at ...
4
votes
1answer
164 views

Cryptanalysis of AES on SSD with TRIM enabled

Attack scenario: SSD physically retrieved from a computer that is turned off. The entire disk is encrypted with AES 256-bit (GNU/Linux, LUKS). The SSD has had TRIM enabled for several years and the ...
4
votes
1answer
569 views

Families of public/private keys in elliptic curve cryptography

I'm looking for a related key scheme for elliptic curve cryptography. The basic idea would be that there would be a master public key and a master private key. From the master public key, you could ...
4
votes
2answers
198 views

Hash or compression function in Merkle tree nodes?

Wikipedia says about a Merkle tree: Nodes further up in the tree are the hashes of their respective children. Usually, a cryptographic hash function such as SHA-2 or SHA-3 is used for the hashing. ...
4
votes
1answer
274 views

reducing false positives in searchable encryption

Practical techniques for searchable encryption proposed by Song et al. [1] have a false positive rate of $l/2^m$ where $l$ is left half of encrypted bits and $m$ is right half and $l+m=n$ where $n$ is ...
4
votes
3answers
374 views

Comparison: complexity measures vs. security

Assume that you want to compare several cryptographic primitives (say, encryption schemes), and choose one. You need to consider several complexity measures, such as the key length, encryption time, ...