an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

53
votes
3answers
32k views

Why is elliptic curve cryptography not widely used, compared to RSA?

I recently ran across elliptic curve crypto-systems: An Introduction to the Theory of Elliptic Curves (Brown University) Elliptic Curve Cryptography (Wikipedia) Performance analysis of identity ...
27
votes
4answers
3k views

How big an RSA key is considered secure today?

I think 1024 bit RSA keys were considered secure ~5 years ago, but I assume that's not true anymore. Can 2048 or 4096 keys still be relied upon, or have we gained too much computing power in the ...
25
votes
4answers
13k views

How can I generate large prime numbers for RSA?

What is the currently industry-standard algorithm used to generate large prime numbers to be used in RSA encryption? I'm aware that I can find any number of articles on the Internet that explain how ...
25
votes
10answers
4k views

Now that quantum computers have been out for a while, has RSA been cracked?

D-wave systems has released a commercially viable quantum computer. This means in theory, that all asymmetric encryption algorithms — such as RSA — are now useless due to the speed at which quantum ...
24
votes
3answers
6k views

How can I use asymmetric encryption, such as RSA, to encrypt an arbitrary length of plaintext?

RSA is not designed to be used on long blocks of plaintext like a block cipher, but I need to use it to send a large message. How can I do this?
24
votes
3answers
2k views

How are primes generated for RSA?

As I understand it, the RSA algorithm is based on finding two large primes (p and q) and multiplying them. The security aspect is based on the fact that it's difficult to factor it back into p and q. ...
18
votes
1answer
609 views

What security authorities and standards reject $e=3$ in RSA, when, and with what rationale?

In RSA, some security authorities and/or standards allow the public exponent $e=3$, others require or recommend $e>2^{16}$ (or perhaps some other minimum). I gathered the following: PKCS#1 allows ...
15
votes
5answers
1k views

Does RSA work for any message M?

I decided to read the original RSA paper A Method for Obtaining Digital Signatures and Public-Key Cryptosystem because of a question I had about RSA (which is not the question I'm about to ask, but ...
14
votes
5answers
721 views

Is it feasible to build an index of prime factors?

Would it be possible to break an RSA key, in for example 1 week of time, if the cracker have already spent X number of years building an index of primes by performing every permutation of existing ...
14
votes
4answers
806 views

Is Wiener's attack on RSA extendable to larger keys with low hamming weight?

Using small private exponents with RSA improves performance. However, it has been shown (Wiener, 1990) that if $\log d \leq \frac14 \log N$, the private exponent $d$ can be reconstructed from the ...
13
votes
8answers
2k views

RSA with small exponents?

Just to establish notation with respect to the RSA protocol, let $n = pq$ be the product of two large primes and let $e$ and $d$ be the public and private exponents, respectively ($e$ is the inverse ...
11
votes
6answers
5k views

Is Diffie-Hellman mathematically the same as RSA?

Is the Diffie-Hellman key exchange the same as RSA? Diffie Hellman allows key exchange on a observed wire – but so can RSA. Alice and Bob want to exchange a key – Big brother is watching everything. ...
10
votes
4answers
2k views

Why RSA encryption key is based on modulo $\varphi(n)$ rather than modulo $n$

While calculating RSA encryption key we take modulo $\varphi(n)$ rather that modulo $n$. I couldn't understand why its so?
10
votes
4answers
2k views

Encrypting small values with RSA private key

I'm looking for best practices when it comes to encrypting small (< 128 bytes) amounts of data with the RSA private key. Signing it would make the resulting payload too large.
10
votes
1answer
957 views

Security strength of RSA in relation with the modulus size

NIST SP 800-57 §5.6.1 p.62–64 specifies a correspondence between RSA modulus size $n$ and expected security strength $s$ in bits: ...
10
votes
2answers
7k views

Signatures: RSA compared to ECDSA

I'm signing very small messages using RSA, and the signature and public key are added to every message, which requires a lot of space compared to the actual content. I'm considering switching to ...
9
votes
2answers
2k views

Can two different pairs of RSA key have the same modulus?

Can $n=pq$ be part of two different pairs of RSA keys? If such keys exist, say $(e_1,n)$ and $(e_2,n)$, how are they related? What will be the security concerns for the two users?
9
votes
3answers
3k views

What is the relation between RSA & Fermat's little theorem?

I came across this while refreshing my cryptography brain cells. From the RSA algorithm I understand that it somehow depends on the fact that, given a large number (A) it is computationally ...
9
votes
1answer
1k views

Why do all SSH-RSA Keys begin with “AAAAB3NzaC1yc”?

My Friend and I have been generating a few ssh2-rsa keys and noticed that all the public keys began with "AAAAB3NzaC1yc". The similarity extended to "AAAAB3NzaC1yc2EAAAABIwAAAQEA" between two keys I ...
9
votes
2answers
602 views

Why RSA can't handle numbers above 76?

I'm going to encrypt the characters Zhu, and decrypt them using RSA. I'm using the public key $\{e, n\}$ and private key $\{d, n\}$. The values of $e$, $d$ and $p$ ...
9
votes
2answers
2k views

Are there practical upper limits of RSA key lengths?

Suppose one wanted to use RSA encryption for the sole purpose of sending key bits for use in symmetric crypto systems, a dedicated key exchange system so to speak. And say you didn't think that the ...
9
votes
3answers
376 views

Can we ensure the security of a crypto-algorithm and -implementaton against acoustic cryptanalysis?

Like people always say: “Attacks only get worse…” — which is why I'm asking early. I have been reading the paper “RSA Key Extraction via Low-Bandwidth Acoustic Cryptanalysis” published December 18, ...
9
votes
3answers
288 views

Is it possible to create an asymmetric cryptosystem where the private keys are not easily verifiable as such?

Plaintext that consists of an RSA key is easily recognizable as such, because it satisfies certain mathematical properties, in particular (See the answer for Why can an encrypted private key be brute ...
9
votes
3answers
407 views

Is there an intuitive explanation as to why only the private key can decrypt a message encrypted with the public key?

I have just learned about using PGP/GPG for email encryption and one thing has always bugged me: How is it possible that a message encrypted with somebody's public key can be decrypted only with that ...
9
votes
3answers
865 views

Are any of the major asymmetric ciphers distinguishable (EG, RSA, ECC)?

Related to "Is it possible to derive the encryption method from encrypted text?". Given ciphertexts generated by any of the major asymmetric ciphers (RSA, ElGamal, ECC, etc..) can these ciphertexts ...
9
votes
1answer
374 views

What changed in PKCS#1 v2.2, and why?

PKCS#1 is one of the most used (de-facto) standard for real-world use of RSA. That's for good reasons: PKCS#1 is well thought, versatile, understandable, has been relatively stable for over two ...
8
votes
3answers
11k views

RSA encryption with private key and decryption with a public key

Does the encryption with a private key and decryption with a public key works in RSA? Is it done when we use RSA for sender authentication ? Thanks.
8
votes
3answers
432 views

Is it reasonable to assure that p-1 and q-1 aren't smooth?

I came across the requirement that, in RSA, $p-1$ and $q-1$ shouldn't be smooth, shouldn't consist of lots of small factors. Therefore my question: How complicated is it to check whether $p-1$ is ...
8
votes
5answers
414 views

RSA leak bits to factor N

Suppose you randomly generate large primes p and q as in RSA, and then tell me N=pq but not p or q. Then, you would like to actually let me factor N, except you should tell me as few bits of ...
8
votes
3answers
2k views

Is it possible to validate a Public Key in RSA?

If I have a 1024-bit number, and someone is telling me that it is in fact a valid RSA public key, is there any way I can quickly validate that it is indeed so (without cracking RSA)? (I suppose I am ...
8
votes
2answers
368 views

Given a message and signature, find a public key that makes the signature valid

Given a message $M$ and a signature $S$, is it feasible to find a RSA public key $(n,e)$ such that $S$ verifies as a valid signature on $M$ (using this public key)? What if we're given one public key ...
8
votes
2answers
7k views

When to use RSA and when ElGamal asymmetric encryption

If i am not wrong in cryptography there are 2 basic cryptographic schemes for public key cryptography. RSA encryption whose security is based on the infeasibility of solving the factoring of big ...
8
votes
2answers
6k views

What's the fundamental difference between Diffie-Hellman and RSA?

What is the difference in the purpose of DH and RSA? Aren't they both public-key encryption?
8
votes
0answers
233 views

Who first published the interest of more than two prime factors in RSA?

Multi-prime RSA is now a well known technique: it uses $k>2$ distinct secret prime factors in the public RSA modulus, with the advantage that, using the CRT, we can gain a speed boost in ...
7
votes
3answers
751 views

Is RSA padding needed for single recipient, one-time, unique random message?

I want a way to encrypt files using this process: http://crypto.stackexchange.com/a/15 . That is: generate a random password, use that to AES-encrypt a file, and use an RSA public key to encrypt the ...
7
votes
2answers
4k views

Definition of Textbook RSA

What is the definition of Textbook RSA? What are some of the properties of textbook RSA? How does it differ from other RSAs?
7
votes
3answers
2k views

Why hash or salt when signing?

I've seen an example of how to sign using RSA. Besides the signing itself (s = m^d mod n) it also hashes and adds an IV. Why is that needed?
7
votes
2answers
943 views

Cycle attack on RSA

I originally posted this question in the mathematics section, you can see it here. Let $p$ and $q$ be large primes, $n=pq$ and $e : 0<e<\phi(n), \space gcd(e, \phi(n))=1$ the public encyption ...
7
votes
2answers
206 views

RSA: Letting $p$ and $q$ have different bit-size

I am aware that there are concerns if $p$ and $q$ are close i.e. $\Delta=|p-q|$ can't be too small. But I would like to know if there are any known attacks for cases where $p$ and $q$ take on ...
7
votes
1answer
349 views

Exposing RSA private-key data… bad?

We know that exposing $p$, or $q$ or $\phi(n)$ results in trivial attacks on RSA since they allow us to factor $n$ and to compute the private exponent $d$. In OpenSSL (and most RSA implementations) ...
7
votes
2answers
3k views

Impacts of not using RSA exponent of 65537

This RFC says the RSA Exponent should be 65537. Why is that number recommended and what are the theoretical and practical impacts & risks of making that number higher or lower? What are the ...
7
votes
1answer
1k views

Why does the PKCS1 RSA private key structure contain more than just exponent and modulus?

The ASN.1 spec for the PKCS1 RSA private key format is as follows: ...
7
votes
4answers
494 views

Is an RSA variant with public exponent $e=f+(p-1)\cdot(q-1)$ safe (for $f$ random in some small interval)?

Alice is going to use some existing RSA scheme (employing industry-standard signature or/and encryption with proper padding), which she can't change, or influence beyond her choice of key. In this ...
7
votes
1answer
3k views

Calculating RSA private exponent when given public exponent and the modulus factors using extended euclid

When given $p = 5, q = 11, N = 55$ and $e = 17$, I'm trying to compute the RSA private key $d$. I can calculate $\varphi(N) = 40$, but my lecturer then says to use the extended Euclidean algorithm to ...
7
votes
1answer
309 views

Is SSH public key authentication weakened by 'none' cipher?

As far as I know, SSH2 first does a key exchange based on the server host key and brings up transport authentication and encryption derived from this kex. The real authentication (password or public ...
6
votes
3answers
407 views

Initialize a PRNG with a password

Let's assume that we have a secure PRNG. Is it "safe" to initialize it with password, or seed based on a password like SHA256(password)? If yes, is it "safe" to generate an RSA or DSA key from it? ...
6
votes
2answers
433 views

Why hash the message before signing it? Digital signature with RSA

Here's a method to sign the message with RSA: Why hash the data before signing it? Why not sign the whole message? It'll save time if you sign the hash value, but I've heard there are also security ...
6
votes
2answers
408 views

Would RSA make sense if we used no computers?

I was recently wondering - would RSA be useful if we brought it to, say, medieval times? Could you choose the keys so that you could encrypt/decrypt messages quite easily, but factoring the private ...
6
votes
3answers
1k views

What are some disadvantages of homomorphic encryption schemes?

I'm doing some self-teaching / research for my own benefit in homomorphic cryptography. I've studied both additive and multiplicative schemes (Pallier and RSA respectively), but all I can seem to ...
6
votes
2answers
260 views

Is encrypting credit card numbers one by one with rsautl secure?

I wish to encrypt credit card numbers one by one using asymmetric encryption on the command line. My current approach is this… Encrypt: ...