an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

2
votes
1answer
365 views

Why is RSA usually limited to messages up to 1 block

I'm wondering why RSA encryption usually is only used for messages that fit into one block. For larger messages hybrid encryption in combination with symmetric ciphers like AES seem to be the solution ...
9
votes
1answer
3k views

Why do all SSH-RSA Keys begin with “AAAAB3NzaC1yc”?

My Friend and I have been generating a few ssh2-rsa keys and noticed that all the public keys began with "AAAAB3NzaC1yc". The similarity extended to "AAAAB3NzaC1yc2EAAAABIwAAAQEA" between two keys I ...
4
votes
1answer
802 views

What happens if an RSA key pair has identical public and private exponents?

Rather, is it possible for big prime numbers? Classroom examples usually involve smaller primes, so for example if you are given a prime number pair $p = 3$, $q = 13$ you would get $n = 39$ and $e = ...
10
votes
1answer
8k views

Calculating RSA private exponent when given public exponent and the modulus factors using extended euclid

When given $p = 5, q = 11, N = 55$ and $e = 17$, I'm trying to compute the RSA private key $d$. I can calculate $\varphi(N) = 40$, but my lecturer then says to use the extended Euclidean algorithm to ...
0
votes
1answer
1k views

Why the following attack in common modulus RSA works?

Suppose that i share a common modulus $N$ with two users $u_1$ and $u_2$ with public, secret keys ($e_a,d_a$), ($e_b,d_b$). Why then $gcd(V,e_b)=1$ where $V=d_a*e_a-1/$W and $W=gcd(e_b,d_a*e_a-1)$ ...
6
votes
4answers
3k views

Why is it important that phi(n) is kept a secret, in RSA?

Why is it important that $\phi(n)$ is kept a secret, in RSA?
1
vote
0answers
53 views

Generating Polynomials for the MPQS

I'm going to try and eventually factor RSA-100, but my current QS needs a lot of improvement, so I'm going to try and switch over to the MPQS. I'm a bit confused as to how the MPQS works, which is ...
1
vote
1answer
83 views

Tweaking textbook RSA to make the encryption a Pseudorandom function

Lets say I want to tweak/alter the textbook RSA encryption function to create a pseudorandom function by pre-processing the input. Suppose I do something simple like add 2 to the input before ...
2
votes
1answer
89 views

Individual bits of Textbook RSA

This question relates to the underlying RSA assumption. Forgetting about the fact that Textbook RSA is deterministic, I am curious about the assumed strength of the RSA problem. Does RSA hide all ...
3
votes
3answers
172 views

Can the encryption exponent e be greater than ϕ(N)?

So I was just wondering in RSA, can the encryption exponent e be greater than ϕ(N)?? For an examples sake, lets just say N = 707, so p = 101 & q = 7. So, we have ϕ(707) = 600. Can I have e = ...
2
votes
2answers
1k views

phi(P*Q) = (P-1) * (Q-1)

I was trying to understand RSA when I encountered the Euler Function. I do understand this: $\phi(P)$, where $P$ is a prime is $P-1$. However it seems that for a number $N$ such at $N=P\cdot Q$ where ...
1
vote
1answer
78 views

Is there a big RSA Data Set

Is there a big dataset containing RSA public $(n,e)$ and private keys $d$ and primes $p,q$ where $n = p.q$ ?
3
votes
1answer
176 views

Is this attack for RSA possible?

$N=p·q$ ($p$ and $q$ are prime numbers), $m_1, ..., m_x$ are the messages, $e$ and $d$ are RSA encryption and decryption exponents, respectively. I am given $e, m_1, m_1^e, m_1^d, ..., m_x, m_x^e, ...
3
votes
2answers
611 views

How much extra information is in an RSA public key?

I'm trying to calculate the size of an RSA public key in Ruby. I've retrieved the key in PEM format, and once I've decoded the base64 part from the PEM format, I get the size in bytes. What I find is ...
4
votes
2answers
541 views

Attacks on the RSA Cryptosystem

I was reading some articles about attacks on RSA system and I wonder about some generalization of the following theorem. Theorem (Coppersmith). Let $N=pq$ be an $n$-bit RSA modulus, where ...
2
votes
1answer
224 views

RSA Key generation Public exponent too big

I'm currently writing a paper about RSA (a self-chosen subject). I'm writing about the key-generation in RSA, and I have problem finding the public exponent e. I have chosen p = 61 and q = 53. Then ...
5
votes
2answers
1k views

RSA blind signatures in practice

Hi I have a problem with moving my blind signature implementation from educational (textbook RSA) to more practical (padded RSA) side. David Chaums paper gives a following figure: $r$ - blinding ...
1
vote
1answer
3k views

RSA 4096 bit key benchmark

How can I benchmark RSA operations on my computer? I want to know about 4096-bit long keys on general computers. How many encryptions and decryptions are possible per second? All benchmarks I found ...
1
vote
0answers
121 views

Factorize RSA knowing several N and E

I did a CRT challenge yesterday and there`s one problem I was unable to solve, probably due to my lack of understanding advanced crypto math. It`s about RSA. There are ten given pairs of N and E ...
2
votes
1answer
426 views

using Post-quantum asymmetric ciphers instead of RSA

We can't trust RSA to encrypt our Emails so what is best post-quantum cryptography system as alternative for RSA which provide good security and don't be breakable? because McEliece cryptosystem looks ...
3
votes
1answer
246 views

RSA Without Padding?

I've been looking at the weakness with plain/textbook RSA, where the same message is encrypted and sent to multiple destinations. In this case, it is possible to recover the message. Given that an ...
5
votes
1answer
1k views

Get RSA PlainText without Knowing Private Key

If I have an algorithm,RSA-Crack(), that, for a given RSA public key (n,e), is able to decrypt 1% of the messages encrypted with that key (without knowledge of the corresponding private key).Can there ...
1
vote
1answer
270 views

Does RSA-OEAP have integrity and authenticity properties?

RSA-OAEP is IND-CCA2 secure (indistinguishable under an adaptive chosen ciphertext attack). Does it also have the INT-CTXT (integrity of ciphertext) and INT-PTXT (integrity of plaintext) properties? ...
5
votes
1answer
699 views

In RSA encryption, does the value of e need to be random?

I am a novice programmer and am just finishing up an RSA encryption program that I am writing for practice. Currently I have the program generate a relatively small random value for the public key e. ...
1
vote
1answer
718 views

Weakness in using only one RSA key pair for two-way communication?

In Alice/Bob/Cindy terms (EDIT: and with a little more detail): Alice and Bob have each securely obtained one key of an RSA keypair from a trusted third party. Alice has one key ($e$ and $n$), Bob ...
3
votes
1answer
2k views

Constructing RSA private key, given public key

As part of a puzzle I was given an RSA 256-bit public key and an encrypted message. The key itself is very weak, having exponent e = 65537 and modulus N = ...
-2
votes
1answer
471 views

Encrypting with private key in Public Key InfraStructure [closed]

In Public key infrastructure, the MD5 of a piece of data is encrypted with the private key of a sender and this encrypted MD5 – along with the data – is again encrypted using an algorithm like AES or ...
4
votes
2answers
2k views

Are there any standards of multi-prime RSA key generation?

FIPS 186-3 specifies a method to generate DSA parameters. Is there anything similar (official standard or widely-accepted recommendation) that shows how to generate the primes for multi-prime RSA?
2
votes
2answers
6k views

Decrypt digital signature using RSA public key with openssl

I have a digital signature that was created using the following algorithm: a SHA-256 hash of the body of the message is calculated. It is then signed using an RSA private key and the result is ...
4
votes
0answers
175 views

Ring Signature - paper/code difference in trying to solve inverse trap door function?

there is a paper on ring signatures and a python implementation of it here. The Step 4 in the paper describes $y_s = v =C_k,_v(y_1, y_2, ... y_r)$ for all $1 \leq i \leq r$ where $i \neq s$. The ...
5
votes
2answers
224 views

Why does OAEP have 2 rounds with 2 random oracles?

I strive into understanding why OAEP has two rounds of computations and not just one. I.e: Wouldn't it be safe to hash the random number r and XOR it with the original message?What security risks if ...
2
votes
3answers
2k views

Is it safer to encrypt twice with RSA?

I wonder if it's safer to encrypt a plain text with RSA twice than it is to encrypt it just once. It should make a big difference if you assume that the two private keys are different, and that the ...
1
vote
1answer
1k views

What is a trapdoor permutation?

Can anyone explain to me what a trapdoor one-way permutation is? Is RSA a trapdoor one-way permutation? Context: I was reading about ring signatures. On page 560, it describes steps to ...
1
vote
2answers
203 views

Breaking RSA, given a special kind of oracle that decrypts related ciphertexts for us

Let $c=E^{RSA}_{e}(w)$ be the ciphertext belonging to the plaintext $w$ if an $RSA$ system is used. Assume that the public exponent $e$ satisfies $e \le 10$. Furthermore, assume there is an oracle ...
7
votes
2answers
1k views

RSA and prime difference

It is known that the two prime factors $p$ and $q$ of an RSA modulus $n$ should not be too close to each other, otherwise an attacker may factor the modulus. In other words, $\Delta = \left| p - q ...
7
votes
4answers
533 views

Is an RSA variant with public exponent $e=f+(p-1)\cdot(q-1)$ safe (for $f$ random in some small interval)?

Alice is going to use some existing RSA scheme (employing industry-standard signature or/and encryption with proper padding), which she can't change, or influence beyond her choice of key. In this ...
3
votes
1answer
780 views

Why do we need in RSA the modulus to be product of 2 primes?

I think I roughly understand how the RSA alorithm is working. However, I don't understand why we need the $N$, which we use as a modulus, to be $pq$ for some large primes $p, q$. I vaguely know it ...
2
votes
2answers
175 views

RSA keys finding when messages are known

I have this situation, where, in a game, people send messages to each other (game moves etc...) These messages need to be encrypted, and should only be readable by the destination person. I am using ...
3
votes
1answer
543 views

What's the main difference between Pohlig-Hellman and RSA?

Both Pohlig-Hellman and RSA perform encryption and decryption by exponentiation modulo some integer ($p$ prime for PH, $n$ composite for RSA). They both use a key $e$ as the exponent to encrypt a ...
1
vote
1answer
153 views

RSA encryption input range - plaintexts that map to ciphertexts?

According to the wiki article on the RSA encryption function, the valid range of input $m$ is $0 \leq m \lt n$. However I have found that the following values of $m$ always return themselves when ...
2
votes
3answers
2k views

Is 512-bit RSA still safe for signature generation?

The standard CSP on Windows XP only supports RSA up to 512-bit, which means that it's the maximum key size I can use for authenticity verification of updates. The public key is embedded in the ...
2
votes
1answer
407 views

What is the strength of unpadded RSA?

I would like to use unpadded RSA for homomorphic encryption in a toy P2P game, for things like fair coin flips and shuffling. How many bits of security does unpadded RSA have, in relation to its key ...
4
votes
1answer
574 views

is this RSA private key valid?

is this RSA private key valid? First, here's the RSA private key in question: ...
2
votes
2answers
3k views

Is RSASSA-PKCS1-v1_5 a good signature scheme for new systems?

Is RSASSA-PKCS1-v1_5 a good signature scheme to recommend that people use in new systems? Is it believed to be secure and represent the state-of-the-art in RSA-based signatures? I understand that ...
10
votes
2answers
748 views

Why RSA can't handle numbers above 76?

I'm going to encrypt the characters Zhu, and decrypt them using RSA. I'm using the public key $\{e, n\}$ and private key $\{d, n\}$. The values of $e$, $d$ and $p$ ...
2
votes
1answer
650 views

ABC Conjecture's Impact on RSA Encryption

A recent proof of the ABC Conjecture has been released by one Shinichi Mochizuki. Now, I'm not well versed in mathematics but it would appear that this proof implies that finding prime factors could ...
-1
votes
1answer
94 views

modulus condition [closed]

In RSA algorithm, the modulus $n$ should be chosen based on the below condition $2^{8(k-1)} \leqslant n < 2^{8k}$ Where $k$ is the byte length of the modulus $n$. for this condition I want the ...
1
vote
2answers
83 views

find solutions that solve the equations

I am implementing a timing attack on RSA for school and I need to generate two sets of messages $Y$ and $Z$ for which holds: $ (Y^d \mod N) \cdot Y < N $ and $ (Z^d \mod N) \cdot Z > N $ where ...
3
votes
3answers
2k views

How do ciphers change plaintext into numeric digits for computing?

For example, in RSA, we use this for encryption: $ciphertext = (m^e \mod n)$ and for decryption. If our message is "hello world", then what number do we have to ...
8
votes
4answers
8k views

Why is padding used for RSA encryption given that it is not a block cipher?

In AES we use some padded bytes at end of message to fit 128/256 byte blocks. But as RSA is not a block cipher why is padding used? Can the message size be any byte length (is the encrypting agent ...