an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

1
vote
0answers
104 views

Is it possible (how difficult) to find MORE than one valid RSA signature?

Is it possible (how difficult) to find more than one valid RSA signatures for a given message m (after padded) and a public key ...
1
vote
2answers
355 views

Public key Issue - same key pair as existing one? [duplicate]

My question is a bit naive, but what if someone generates the same RSA key pair as someone else? This person would have the same private key and so would be able to decrypt messages not intended to ...
1
vote
0answers
44 views

Minimum length of PKI key for signature [duplicate]

I am looking for data which shows how time it would take to brute force (or crack by any other method) different sizes of RSA/DSA keys used for a digital signature. I am looking to use as small a ...
1
vote
0answers
78 views

RSA: Common modulus attack problem [duplicate]

I understand in theory how the common modulus attack works (as described here: how to use common modulus attack?) Though, I did not understand completely how it worked with a negative $s_i$. Since ...
1
vote
0answers
396 views

Commutative Encryption with RSA scheme?

I wanted to know how I could manage to do what I'm going to tell you next, with the RSA encryption/decryption scheme. So Alice and Bob each have a public key $(n, e)$ and a private key $(p, q, d)$; ...
1
vote
0answers
103 views

Shor's Algorithm values

I'm working with Shor's algorithm and I have a question regarding the following step $$a^r -1 = (a^{r/2}+1)(a^{r/2}-1)=0 \pmod n$$ Now what is going to be the result if ${r/2}$ was -1? this will ...
1
vote
0answers
60 views

Smart card Strong authentication / Verification ( fingerprints)

I'm trying to make a strong authentication software and embedded software in a java card. I have found many papers and publications about the subject… too much information to process and I'm working ...
1
vote
1answer
181 views

Sequence of Encrypting RSA like Chaum Blinding scheme

I'd be a noob in cryptography but reading up a little on RSA, I do get some understanding and I want to specifically resolve this issue. UPDATED Lets say we have the following values in place: ...
1
vote
0answers
124 views

RSA timing attack

Given an RSA implementation that uses Montgomery multiplications and CIOS exp algo, but NOT CRT. Given a decryption1 oracle that takes chosen cipher text and responds the plain text and the time it ...
1
vote
0answers
267 views

Is this a secure (and correct) sign-then-encrypt technique for transferring messages?

After reading some information on the way iMessage works I have been working on writing some code to try my hand at securely transferring messages in a similar manner and I wanted to confirm that the ...
1
vote
0answers
172 views

Distributed integer factorization?

I'm looking around for publicly published work on factorization of large numbers using distributed systems of any kind. So far I've come across the PDF "Mapreduce for integer factorization" by Javier ...
1
vote
0answers
151 views

Can you show how that RSA does/doesn't provide anonymity?

Considering a CPA-secure version of RSA where the ciphertext is just a rundom element from $Z^*_N$. Does that meet the anonymity requirement in which an cpa adversary cannot distinguish between a ...
1
vote
0answers
104 views

Is it possible to modify SSL handshakes to enable PFS while still using RSA during the handshake?

I know we could possibly be using DH key exchange, that would enable PFS. However, what if we make modifications on our SSL 3.0 handshake such that the only cipher we use is RSA for the achieving PFS? ...
1
vote
0answers
221 views

Diffie-Hellman exchange

So for a Diffie-Hellman problem, I am given the prime $p$ for the Diffie-Hellman exchange. I am also given $g$, secret number for machine as $A$, secret number for station as $B$, a Diffie-Hellman ...
1
vote
0answers
737 views

Decrypting a message without the private key using CRT

I am given 5 different encryption modulus, $N$, each ranging from 78 to 88 numbers long. Then for the encryption exponent, each has the same which is 5. Then I am given 5 different encrypted messages, ...
1
vote
0answers
159 views

Career advice for our readers [closed]

I am a first year math PhD student with work experience and an MS in math. Do you have any advice regarding internships involved with cryptography and other mathematics other than the NSA? Thanks.
1
vote
0answers
503 views

RSA Attack with some known values

There is an RSA implementation which I need to attack to get the encrypted messages. Some of the values are known. Plain text value for input. So if I enter a message, say it "A", the plain text is ...
1
vote
0answers
155 views

Can anyone explain most popular RSA attacks like I'm 5?

Suppose I implement RSA myself in C and I use just the formulas from number theory. What attacks would my implementation be vulnerable to? Can anyone explain this to me like I'm 5?
1
vote
0answers
154 views

Best Asymmetric Encryption Standard for Communications? [closed]

I'm new to the standards of encryption. I understand the math behind RSA really well. I'm wanting to design an application for private peer to peer communications using RSA and wanted to know what ...
1
vote
0answers
74 views

Why is it impractical to generate a semiprime dictionary? [duplicate]

This might be a very simple question. However, I am just learning the concept, so just excuse me. I am wondering why there is not any attempt to generate all semiprime numbers? (as an dict. attack to ...
1
vote
0answers
324 views

Method and explanation for calculating difference in speed between DES and RSA

Our assignment asks us to convert an RSA speed in bytes per second to a DES speed in bytes per second. Our professor's treatment of this ("RSA is 100 times slower than DES") seems insufficient. Could ...
1
vote
0answers
90 views

Strong RSA problem in $\mathbb Z^*_{n^2}$

Comparing to this question, assume $C, M \in \mathbb Z^*_{n^2}$, $e \ge 3$, is it hard to compute $M$ that satisfies $C=M^e \mod n^2$ when $C$ and $(n, e)$ are given?
1
vote
0answers
542 views

RSA and One Time Password (OTP) service

What is the expert cryptographic opinion on the following? Assume that there is a web server and a client on web page. User on the Client calls an OTP web service on the server which: creates a RSA ...
1
vote
0answers
679 views

How compared encryption algorithm in terms of efficiency

I want to compare two cryptographic algorithms. The first algorithm is RSA, and second algorithm is ElGamal elliptic curve cryptography. Now, I’m looking for a way to compare the speed of the two ...
1
vote
0answers
62 views

Generating Polynomials for the MPQS

I'm going to try and eventually factor RSA-100, but my current QS needs a lot of improvement, so I'm going to try and switch over to the MPQS. I'm a bit confused as to how the MPQS works, which is ...
1
vote
0answers
86 views

Two untrusted party want to exchange data: how to ensure each one gets the data it needs? [duplicate]

Possible Duplicate: Two untrusted party want to exchange data: how to insure each one gets the data it needs? I am trying to come up with what could maybe be a novel algorithm for an ...
1
vote
1answer
147 views

RSA Key composition

I'm trying to figure out how it is composed the RSA key. Follow what I know : For a RSA 2048, 2048 is the bit length of the module. The public key is composed by $(e,M)$ when $e$ is the public ...
0
votes
2answers
273 views

Why are these techniques not feasible to crack RSA?

For $d = e^{-1} \mod \phi(n)$ $$d\cdot e \operatorname{mod} \phi(n)=1$$ $$d = (e^{-1} \operatorname{mod} \phi(n))$$ With having $e$ and $n$, we can calculate the value of $d$ , the private key for ...
0
votes
2answers
2k views

RSA PCKS1 v2.1 RSAES-OAEP algorithm

Using RSA public key (n,e) the encryption of a message is c= (m^e) mod n and the corresponding message is decrypted as ...
0
votes
2answers
131 views

Could Riemann hypothesis solve certainly RSA?

I don't have the background for dealing with Riemann hypothesis but is well known that covers the prime distribution below a specified number. In order to solve the RSA problem you have to factor the ...
0
votes
3answers
383 views

Implementing a web app where the server cannot decrypt its own data?

I'm a cryptography novice, but I think that the world needs to move towards an "encrypt everything" mentality as much as possible. As a result, I've been thinking a lot about ways to build a web app ...
0
votes
1answer
148 views

In RSA. Why is $\phi(n)$ kept secret and $n$ is public?

I mean, $n$ can also be easily used to find the factors $p$ and $q$ right?
0
votes
2answers
123 views

How to determine RSA block size for decryption

A message coded with RSA is broken up into blocks, then padded/transformed prior to encryption via modular exponentiation with the public key. However, the encryption result for each block is not ...
0
votes
2answers
772 views

What prime lengths are used for RSA?

Let's assume we have an RSA 2048 that was produced by two primes multiplication. What is the digit's difference in those 2 factors? For example one prime is 1024 digits and second one 1024 or, one is ...
0
votes
2answers
269 views

Factors of RSA modulus

In the article A Method for Obtaining Digital Signatures and Public-Key Cryptosystems, the original RSA article, it is mentioned that Miller has shown that n (the modulus) can be factored using any ...
0
votes
2answers
364 views

Encryption of a number with RSA bigger than $n$

I'm having trouble understanding why encrypting a number $m$, which is larger than $n=p\cdot q$. I've looked into the following threads: Why RSA can't handle numbers above 76? Why does plain RSA ...
0
votes
1answer
51 views

Computing the cardinality of the co-domain of specific modular exponentiations

Consider the following function: $f: \mathbb{Z}_n \rightarrow Y,~x \mapsto x^e \bmod n$, where $n = p \cdot q$ is an RSA modulus and $gcd(\varphi(n),e) \neq 1$ (different as required for a public ...
0
votes
1answer
94 views

How much stronger is RC4 if it is keyed with an RSA private key?

My idea is to generate a RSA 2048 bit key and use RC4 with the private RSA key to encrypt a stream of data. RC4 is weak because RC4 keys are small, 256-bit. But when we use RC4 with private RSA 2048 ...
0
votes
1answer
2k views

Does ssl_rsa_with_rc4_128_md5 have known weaknesses?

My bank's website uses HTTPS with the cipher suite ssl_rsa_with_rc4_128_md5. What are the known weaknesses of this suite? Do they have a practical impact for ...
0
votes
3answers
133 views

Does RSA have two trapdoors?

I watched some videos from Khan Academy explaining the algorithm for RSA encryption/decryption. They explained that there are two trapdoors, modular exponentiation being one and prime factorization ...
0
votes
3answers
122 views

How to convert RSA public keys to one key to use for text hashing?

I've recently asked a question about RSA encryption. One of the things that I don't understand is the usage of two public keys. In the example on Wikipedia, a message is encrypted like: ...
0
votes
1answer
58 views

When homomorphic encryption goes wrong?

Consider I have two ciphertext $c_1$ and $c_2$ encrypted using RSA encryption. By definition if I multiply them I'd get $c_1.c_2 \ modN$. My question is what would happen if $c_1.c_2 >N$. Can we ...
0
votes
3answers
238 views

Question on RSA trapdoor permutation

You plan to use a public-key cryptosystem based on the RSA trapdoor permutation in three different real-life applications, in which the attacker has, respectively, only one of the following resources: ...
0
votes
1answer
79 views

One-time pad using RSA and Diffie-Hellman functions

Suppose that Alice and Bob use an encryption algorithm based on a one-way function $F$ (Eve knows it), and $r$, a secret key shared between Alice and Bob (Eve doesn't know it). Key is computed as: $K ...
0
votes
1answer
73 views

Clifford Cocks Interview: “Raising numbers to a power with the product as modulus”

Disclaimer: I'm new to cryptography Background: Clifford Cocks, the former GCHQ mathemetician and crytologist, gave an interview where he said: "My thinking was that you need something that is ...
0
votes
1answer
49 views

Is sharing the RSA public key secure?

I am trying to understand how RSA public key cryptography works. I have the following questions: Are any attacks / compromises possible if a server sends its public key $(n,e)$ in the clear to a ...
0
votes
1answer
37 views

Key sizes for RSA over elliptic curves

I know that it is possible to define RSA over elliptic curves just as DSA and Diffie-Hellman have been. I know that it doesn't offer much of a speed advantage, but does it at least reduce the size of ...
0
votes
2answers
101 views

What is the typical block size in RSA?

If the input text is divided into a fixed block size for encryption and decryption, what could be the typical block size for RSA algorithm for different size of input like 8 MB, 16 MB, 126 MB and 256 ...
0
votes
2answers
95 views

RSA algorithm private key extraction

Decrypting messages can be done by using the following formula: $$M = C^d \mod n$$ Where $M$ is the decrypted message, $C$ is the encrypted message and $d$ is the private key Theoretically ...
0
votes
1answer
105 views

Is this a good communication scheme?

I'm writing a wrapper for a chat program to allow for end-to-end encryption. I'm using Python and PyCrypto to accomplish this. I'd like to use a well known library to do this, but to my knowledge, ...