an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

-1
votes
1answer
138 views

Can someone explain how this unpadded RSA formula works?

Taken from http://en.wikipedia.org/wiki/Homomorphic_encryption, $\mathcal{E}(x_1) \cdot \mathcal{E}(x_2) = x_1^e x_2^e$ $\bmod\; m = (x_1x_2)^e \;$ $\bmod\; m = \mathcal{E}(x_1 \cdot x_2)$ What is ...
4
votes
2answers
259 views

Using single EC cert/keying material to derive symmetric encryption key (for storage)?

The situation involves a single party (single certificate) who would want to AES encrypt a file that they can later decrypt. Assume the EC certificate + EC keys have a purpose i.e. "File encryption" (...
1
vote
1answer
244 views

PKCS1 and blind RSA signatures

Wikipedia's article on RSA blind signatures says that you need to raise the message $m$ to the secret exponent $d$ modulo the public modulus $N$. Implicit within that, it seems to me, is that m needs ...
3
votes
1answer
1k views

RSA key pair generation using PRNG with same seed

I see a lot of Q/A where persons are trying to generate a specific key pair using static data such as a password. Now say we use a known PRNG (dangerous assumption), seeded with a the data as a static ...
4
votes
2answers
368 views

Proof of elliptic curve difficulty

Are there any proofs that cryptographic functions on an elliptic curve are any more difficult than the analogues over modulo arithmetic? While at present, ECC appears to be more difficult, as it is ...
9
votes
5answers
594 views

RSA leak bits to factor N

Suppose you randomly generate large primes p and q as in RSA, and then tell me N=pq but not p or q. Then, you would like to actually let me factor N, except you should tell me as few bits of ...
0
votes
2answers
2k views

RSA PCKS1 v2.1 RSAES-OAEP algorithm

Using RSA public key (n,e) the encryption of a message is c= (m^e) mod n and the corresponding message is decrypted as ...
2
votes
1answer
771 views

RSA smaller number work-out-by-hand not working - I think I made a mistake

I tried out the paper/pencil explanation @ http://sergematovic.tripod.com/rsa1.html, and it seemed to make sense just fine until I came to decryption. Here is what I worked out: Key Creation: Choose ...
5
votes
1answer
335 views

How can I take advantage of repeated patterns in non random RSA prime factors?

I am researching vulnerable RSA moduli which are composed of primes generated with poor entropy. Having a list of these primes I searched for variable sized repeated patterns among them and I noticed ...
7
votes
3answers
2k views

Why is the complexity of RSA-1024 80 bit and not 86 bit?

Why is the complexity of RSA-1024 80 bit and not 86.76611925028119 bit? Here is the complexity for the GNFS (pulled from the linked Wikipedia article): $$\exp\left( \left(\sqrt[3]{\frac{64}{...
1
vote
0answers
509 views

RSA Attack with some known values

There is an RSA implementation which I need to attack to get the encrypted messages. Some of the values are known. Plain text value for input. So if I enter a message, say it "A", the plain text is ...
3
votes
2answers
389 views

Is it possible that two distinct RSA moduli share both of their prime factors?

I am using an algorithm (can be found here1) that can compute efficiently the GCD of multiple RSA keys. It intended for RSA keys that were generated with low entropy and may have one of their primes ...
6
votes
1answer
769 views

What signature schemes allow recovering the public key from a signature?

It seems to be possible to retrieve the (public) key used for creating an ECDSA signature just from the signature alone. This seems like an interesting property; as far as I know, RSA doesn't share ...
1
vote
0answers
159 views

Can anyone explain most popular RSA attacks like I'm 5?

Suppose I implement RSA myself in C and I use just the formulas from number theory. What attacks would my implementation be vulnerable to? Can anyone explain this to me like I'm 5?
1
vote
1answer
523 views

Understanding the “cube-root math” behind an RSA signature forgery

I'm trying to understand the math outlined in this paper on a RSA signature forgery attack. I understand it except for one aspect of how the cube root (that makes the forged signature) is computed. ...
1
vote
1answer
266 views

Brute force attack on RSA - success criteria?

In a hypothetical discussion we ended up with a concrete question I'd like to find the answer to: If you try to brute force an RSA encryption, but the original vale which was encrypted was just ...
5
votes
2answers
265 views

Why does OAEP have 2 rounds with 2 random oracles?

I strive into understanding why OAEP has two rounds of computations and not just one. I.e: Wouldn't it be safe to hash the random number r and XOR it with the original message?What security risks if ...
16
votes
4answers
2k views

Is Wiener's attack on RSA extendable to larger keys with low hamming weight?

Using small private exponents with RSA improves performance. However, it has been shown (Wiener, 1990) that if $\log d \leq \frac14 \log N$, the private exponent $d$ can be reconstructed from the ...
0
votes
0answers
235 views

How to safely sign a 6 characters String?

I have to decide, whether a document, which I am given, was correctly signed by a private key. my Ideas is to sign the document id using RSA with the private key and to print the following onto the ...
0
votes
1answer
94 views

How to choose the appropriate public (i, m) and private (j, m) keys?

I studied some encryption and decryption and I have found some very interesting problem to solve on the internet. I hope I am writing to right site - there are so many in StackExchange otherwise I ...
10
votes
1answer
1k views

What changed in PKCS#1 v2.2, and why?

PKCS#1 is one of the most used (de-facto) standard for real-world use of RSA. That's for good reasons: PKCS#1 is well thought, versatile, understandable, has been relatively stable for over two ...
5
votes
1answer
223 views

Why work in a subgroup QR(n) of an RSA group $Z^*_n$?

I sometimes read in papers that a (sub-)group generator $g$ is taken from $\mathrm{QR}(n)$ instead of $\mathbb{Z}^*_n$, where $n = p \cdot q$ and $p$ and $q$ are prime. Is there a reason for this? ...
3
votes
1answer
1k views

Extract private RSA key from USB cryptographic token using Bardou et al. attack (variant of “million message attack”)

There is a side channel attack on tamper-resistant USB cryptographic tokens using padding-oracle, described by Bardou, Focardi, Kawamoto, Simionato, Steel and Tsay, titled "Efficient padding oracle ...
1
vote
1answer
1k views

Why is it a security problem that two RSA moduli are not co-prime?

I found this security problem, for example: Alice has an RSA public key: $e = 37$ and $\phi$ (totient, $N_A = (pa-1)(qa-1)$) is $55$, so the key is $(37, 55)$. Bob has an RSA public key: $e = 37$ ...
2
votes
1answer
166 views

using random encrypted RSA challenge as key material

Assume a simple protocol for authentication - one side sends a randomly generated challenge string and encrypts it with RSA. The receiver decrypts it and replies with a hash of the challenge, proving ...
3
votes
1answer
430 views

Is it possible to determine the group order by knowing the “public” and “private” key exponents in an RSA group?

I have an RSA group with modulus $n = p \cdot q$, two safe primes $p=2p'+1$ and $q=2q'+1$ and the "public" and "private" key exponents $d$ and $e$. $\phi(n) = 4p'q'$ is the order of the RSA group. If ...
2
votes
1answer
316 views

is this authenticated key exchange protocol sound? too complicated? obviously flawed?

(significantly reworded this question to fit better into crypto.se). I have static RSA keypairs for both sides and an encrypted transport that needs symmetric keys, and need to exchange session keys. ...
1
vote
1answer
454 views

RSA padding: what is it and how does that work?

If I am not mistaken, plaintext RSA is not secure. So, I have read that padding and hashing is needed to make the RSA algorithm secure. However, I am confused on what does padding or armoring mean in ...
1
vote
2answers
435 views

DSA, RSA, ECDSA etc - which one is cheapest for signing?

For a protocol where the server presents its signature to prove authenticity (e.g. IKE/SIGMA/STS with only one party authenticated), it's essential that the signing is extremely cheap, while ...
8
votes
2answers
610 views

Given a message and signature, find a public key that makes the signature valid

Given a message $M$ and a signature $S$, is it feasible to find a RSA public key $(n,e)$ such that $S$ verifies as a valid signature on $M$ (using this public key)? What if we're given one public key ...
16
votes
2answers
22k views

What's the fundamental difference between Diffie-Hellman and RSA?

What is the difference in the purpose of DH and RSA? Aren't they both public-key encryption?
3
votes
4answers
934 views

RSA by hand - did I do something wrong? (c = m on encryption)

to understand RSA better I am doing a little calculation by hand, this is what I got: Choosing: $p = 3$ $q = 5$ $n = 15$ $\phi(pq) = 2 \cdot 4 = 8$ $e > \phi(n) => e = 13$ $e \cdot d = 1 \...
5
votes
2answers
875 views

uniqueness of the RSA public modulus

What is the probability that two separate RSA public moduli are the same? For example, consider a 2048-bit modulus. The number seems to be huge, but the choice for prime factors p and q is much more ...
1
vote
0answers
154 views

Best Asymmetric Encryption Standard for Communications? [closed]

I'm new to the standards of encryption. I understand the math behind RSA really well. I'm wanting to design an application for private peer to peer communications using RSA and wanted to know what ...
1
vote
1answer
1k views

Help with example RSA problem

While learning about RSA, I found this example problem. The answer is supposed to be "a 4-digit number that is a pattern of digits." I have computed it to be 16657 twice. OK, now to see if you ...
4
votes
1answer
155 views

low-exponent RSA

I have questions from http://link.springer.com/chapter/10.1007%2F3-540-68339-9_1 Suppose we have 2 messages $m_1$ and $m_2$ related by a known relation $m_2=m_1+1$. Suppose further the messages are ...
3
votes
1answer
702 views

Cracking an RSA with no padding and very small e

I have a project wherein I have to crack a given cipher text encrypted using RSA and have been given N and e. Can someone suggest an RSA attack using a very small exponent e(here e=3) and no padding?
1
vote
2answers
458 views

Amateur question: two-way RSA?

Is this a sensible scheme for 2-way client/server communication? A client connects to a server. The server and client both generate RSA keys, and send over the public ones to each other. If the client ...
1
vote
1answer
274 views

Preimage resistance hash in digital signature

I'm studying about preimage resistance property of the hash functions. In particularly I'm reading as the missing of this property can be fatal in digital signatures that use RSA. Further details: ...
1
vote
0answers
74 views

Why is it impractical to generate a semiprime dictionary? [duplicate]

This might be a very simple question. However, I am just learning the concept, so just excuse me. I am wondering why there is not any attempt to generate all semiprime numbers? (as an dict. attack to ...
5
votes
1answer
664 views

Given a private RSA key, how do we get the public key?

Is it possible to pre-choose a private RSA key, then obtain a public key from it?
1
vote
1answer
138 views

What kind of cryptography should i use?

I have a trusted third part A that issues an access token (xml file) to an untrusted client C that uses this token to log into an untrusted server S and access to the authorized files. I want only ...
5
votes
3answers
600 views

What are some good references for the implementation weaknesses in RSA

I'm pretty sure I understand textbook RSA. Choose p and q, large primes, and compute n=pq. Choose e such that $gcd(\phi(n),e)=1.$ Publish n and e. Compute d such that $de=1$ (mod $\phi(n)$). To ...
3
votes
1answer
651 views

Can you identify the public key used to encrypt something?

If I encrypt a string with a public key, does the encrypted ciphertext reveal the public key I used to encrypt it? Basically, I don't want anyone to know who the ciphertext is addressed to. I'm ...
1
vote
1answer
4k views

How long to bruteforce a RSA key [duplicate]

Suppose I have a 2048 bit RSA public key, and want to brute force the corresponding private key. I guess there are 2048^16 possible combinations? How long would this take me to brute force with an i7,...
-1
votes
2answers
424 views

Is triple des similiar to RSA in that they message size is limited to the key size?

Is triple des similiar to rsa in that the message size you can encrypt is limited (unlike AES)? Yes you can break the message size into parts and apply it, but I'm not interested in doing that so I ...
5
votes
1answer
402 views

What do recent announcements about solving the DLP in $GF(2^{6120})$ mean for RSA

After just reading the post Do recent announcements about solving the DLP in $GF(2^{6120})$ apply to schemes proposed for cryptographic use? I was a bit confused. DSA, ElGamal and others are based on ...
2
votes
1answer
575 views

When making public key fingerprints - is a sha1 hash still a good idea?

I'm thinking about trying to save some space (and readability) when referencing 2k and 4k public keys (millions of them) by storing the fingerprint in some places instead of the full public key. ...
3
votes
3answers
1k views

If RSA is limited to 117-200 bytes or so, is that a very limited use case?

Am I missing something, or is RSA very very limiting when it comes to ecrypting data when it comes to the actual message size? I have read that you can only encrypt a message of around 117 to 200 ...
2
votes
1answer
1k views

How is text converted to a number for RSA? [duplicate]

According to http://en.wikipedia.org/wiki/RSA_%28algorithm%29#Key_generation the key length is the number of bits in n. So how can a message of many megabytes (millions of bits) be modded by a 1024 ...