an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

0
votes
1answer
77 views

RSA Proof - Is Z(n) closed under multiplication

In RSA proof it can be proved that $\mathbb{Z}^*_n$ is closed under multiplication. Can it be also proved that $\mathbb{Z}_n$ is closed under multiplication? If yes, then how?
0
votes
0answers
39 views

Does RSA work properly with non prime factors? [duplicate]

I know RSA should not use non prime factors for p and q for security reasons, but still, just out of curiosity, will RSA work 100% accurately i.e. message encrypted with one of the key produces same ...
0
votes
2answers
108 views

Is RSA encryption the same as signature generation?

Is performing RSA encryption with the private key identical to performing RSA signature generation (signing)?
7
votes
4answers
499 views

How to argue to a paranoid that RSA is safe?

From today's standpoint, most people would claim RSA to be secure. However, to my knowledge, this is purely based on the speculation that no one knows a computational feasible way to find a $d$ for ...
1
vote
0answers
94 views

Shor's Algorithm values

I'm working with Shor's algorithm and I have a question regarding the following step $$a^r -1 = (a^{r/2}+1)(a^{r/2}-1)=0 \pmod n$$ Now what is going to be the result if ${r/2}$ was -1? this will ...
0
votes
1answer
58 views

Generating the keys for the RSA cryptosystem in probabilistic polynomial time

In general every public key cryptosystem ``has'' a probabilistic polynomial time algorithm $G$ such that $G(1^k)=(\textrm{public key}, \textrm{private key=trapdoor})$; $G$ is called the key generator. ...
1
vote
0answers
44 views

Smart card Strong authentication / Verification ( fingerprints)

I'm trying to make a strong authentication software and embedded software in a java card. I have found many papers and publications about the subject… too much information to process and I'm working ...
2
votes
4answers
295 views

Pseudocode for constant time modular exponentiation

I'm looking to implement modular exponentiation (for RSA) in constant time, but most of the examples I've found are more mathematical descriptions of the operations. Are there any references with ...
2
votes
2answers
378 views

How do institutions like banks do RSA with big primes?

When encrypting with RSA it is often infeasible to decrypt by just doing c^d mod n, because for example when using the primes $(p,q)=(12553,1233)$, which are small ...
7
votes
2answers
236 views

Multiple-prime RSA; how many primes can I use, for a 2048-bit modulus?

In standard RSA, the modulus $n=p_1 p_2$ is a product of two primes $p_1,p_2$ of the same size. Suppose we construct the modulus as a product of multiple primes $p_1,\dots,p_k$, i.e., $n=p_1 p_2 ...
3
votes
1answer
130 views

Are RSA or ECC vulnerable to an attack where the same (unknown) plaintext is encrypted with multiple public keys?

I'm not sure what this attack model is called - it's not known-plaintext and also not quite cipher-text-only. It is similar to this question except the general case (not just two keys) and using keys ...
4
votes
2answers
214 views

State of the art RSA key generation

I would like to know if there is an algorithm to generate a RSA key at the state of the art of the present cryptanalysis. Beside the key lenght I know there are some weakness in the choice of prime ...
6
votes
0answers
228 views

Security of RSA for paranoids with padding?

RSA for Paranoids (RSAP) (in cryptobytes v3n1), also known as Unbalanced RSA, is a variant of RSA proposed in 1995 by Adi Shamir, as a mean to increase the RSA public modulus size while keeping ...
3
votes
1answer
109 views

Is the strength of RSA over quadratic or other cyclotomic fields as strong as over the integers?

If we assume the strength of RSA is based on the difficulty of factoring (which I know we can't guarantee) and we compose the modulus of some other quadratic ring that is a unique factorization domain ...
2
votes
1answer
243 views

Attack of an RSA signature scheme using PKCS#1 v1.5 encryption padding

My best interpretation of this question is that Java's crypto API has been subverted to perform RSA signature using PKCS#1 v1.5 encryption padding. Assume the signature $S$ of a message $M$ is ...
2
votes
2answers
120 views

Perfect Forward Secrecy in TLS

I read that TLS does PFS using Diffie Hellman. However, DH can be used even without certificates - so how is DHE-RSA better than plain DHE? Is DHE a insecure algorithm, that DHE-RSA is needed?
7
votes
2answers
228 views

RSA: Letting $p$ and $q$ have different bit-size

I am aware that there are concerns if $p$ and $q$ are close i.e. $\Delta=|p-q|$ can't be too small. But I would like to know if there are any known attacks for cases where $p$ and $q$ take on ...
2
votes
1answer
150 views

Generate a new public/private key pair for each new message?

When using PGP type public encrypted communication, would it be a good idea to generate a new public for each message and attach that in the new public key in the reply to back to sender mail body? ...
-1
votes
1answer
69 views

How to keep phi(n) secret in RSA?

As we know, RSA cryptosystem have both private key(a,p,q) and public key(b,n), by chinese remainder theorem and fermat's little theorem, we know that the importance of keep p and q secret, and from ...
7
votes
3answers
2k views

What are some disadvantages of homomorphic encryption schemes?

I'm doing some self-teaching / research for my own benefit in homomorphic cryptography. I've studied both additive and multiplicative schemes (Pallier and RSA respectively), but all I can seem to ...
1
vote
3answers
241 views

What is h in the improved solution of RSA algorithm?

I am trying to implement a proposed improved algorithm of RSA . Here the author has increased the number of exponents. However I am unable to understand what $h$ is in the Key generation step. Can ...
2
votes
2answers
186 views

RSA Key Generation Parameters - public exponent, certainty, string-to-key count

I want to know what values are appropriate for the public exponent and certainty when generating an RSA Key (for example using Bouncy Castle RSAKeyGenerationParameters function). What is the ...
2
votes
2answers
180 views

Private RSA key for HMAC key

I am creating software tokens for future request authentication, and I want to use an HMAC for the token to make them tamper-resistant. To ensure I can check the HMAC later I need a secret, persistent ...
7
votes
2answers
1k views

Cycle attack on RSA

I originally posted this question in the mathematics section, you can see it here. Let $p$ and $q$ be large primes, $n=pq$ and $e : 0<e<\phi(n), \space gcd(e, \phi(n))=1$ the public encyption ...
1
vote
0answers
112 views

Defending hybrid encryption schemes against padding oracle attacks

I intend to use a generic integrated/hybrid encryption scheme for transmitting information between a client and a server. Key encapsulation: a 128-bit symmetric key is generated and asymmetrically ...
2
votes
2answers
258 views

At what stage is DHE and RSA used during the SSL/TLS handshake?

At what stage of the SSL/TLS handshake is the DHE and RSA used and what is the purpose of using a pre-master secret when you could just use RSA to exchange the symmetric key (i.e. AES) for further ...
1
vote
1answer
67 views

Is it secure to choose d in a RSA key pair?

An RSA key pair consists of the private key $(n,d)$ and a public key $(n,e)$ such that $de \equiv 1 \bmod{\lambda(n)} $. Usually one chooses a small $e$ and computes $d$ by inverting it modulo ...
-1
votes
1answer
285 views

Verify Signature Failed [closed]

I am writing a small module which will verify signed message. Message will be signed using private key in Smart Card. The inputs are: Signed Message Original Message Public Key / Certificate with ...
-2
votes
1answer
350 views

Encrypting with private key in Public Key InfraStructure [closed]

In Public key infrastructure, the MD5 of a piece of data is encrypted with the private key of a sender and this encrypted MD5 – along with the data – is again encrypted using an algorithm like AES or ...
2
votes
1answer
273 views

Is it true that for RSA with no padding, the length of data must be equal to the length of key?

The question pertains not in terms of security but computing operational functionality, as it how the computation is done. Is it true that for RSA with no padding, the length of data must be equal to ...
5
votes
1answer
291 views

How are trapdoor functions developed/found and where can I find existing ones?

Trapdoor functions are a fundamental part of public key cryptography. An example of the most common trapdoor is Prime Factorization, used in cryptosystems such as RSA How are these trapdoor ...
4
votes
1answer
226 views

Is PKCS #1 v1.5 RSA encryption padding secure under these conditions?

The PKCS #1 v1.5 padding scheme for RSA has been proven to have some weakness when used with TLS for example. My question is: is it still secure under the following conditions? Alice sends a ...
1
vote
1answer
131 views

Non-interactive Zero-knowledge proof signature validation without public key

I'm looking for a method for a scenario with following requirements: At least 3 people (A,B,C,...) are in a Network where they can broadcast messages to everyone but not communicate with a specific ...
1
vote
0answers
73 views

RSA timing attack

Given an RSA implementation that uses Montgomery multiplications and CIOS exp algo, but NOT CRT. Given a decryption1 oracle that takes chosen cipher text and responds the plain text and the time it ...
1
vote
0answers
124 views

Is this a secure (and correct) sign-then-encrypt technique for transferring messages?

After reading some information on the way iMessage works I have been working on writing some code to try my hand at securely transferring messages in a similar manner and I wanted to confirm that the ...
1
vote
1answer
107 views

Difference between known-plaintext attack and forward search attack

I am looking at the different attacks on RSA. I came across known-plaintext attack where the public key can be used to encrypt all possible messages until it finds a match on the sent encrypted ...
4
votes
1answer
102 views

Should different key pairs be used for signing and encryption?

In the recent iOS Security white paper from Apple (February 2014), the section on iMessage discusses using two different asymmetric key types as part of its standard operation: When a user turns ...
4
votes
1answer
141 views

Difference RSA keypair creation openSSL and openPGP?

Creating a 2048bits RSA keypair I figured that doing this using openssl takes as an input 32bytes of "randomness" from /dev/urandom gpg (openGPG) takes as input ...
1
vote
2answers
482 views

RSA problem if i choose two specific small prime numbers?

I know that rsa normally is made to make it with big integers, but i trying to make the algorithm myself (with the help of wikipedia) and I´m making it with small numbers to track the problems easily. ...
-3
votes
1answer
53 views

Selection of cryptographic functions for OAEP

I can't understand how the "cryptographic functions" are to be selected RSA + OAEP which are used in OAEP. How to choose these "cryptographic functions"(G and H)?
2
votes
0answers
59 views

Timing attacks against RSA, DH and AES

I have been reading about “Timing Attacks on RSA: Revealing Your Secrets through the Fourth Dimension” by Wing H. Wong. I was wondering if this attack is feasible while signing with RSA and, if yes, ...
2
votes
2answers
681 views

How to calculate the maximum output size for data encrypted with a RSA Private Key?

I have an an encryption algorithm I am working with that looks like this: prv_key_enc(sha1_hash(data)) Where, the RSA parameters are: RSA/ECB/PKCS1Padding 1024 ...
1
vote
0answers
81 views

Is MITM possible after key exchange phase done successfully in RSA?

Is MITM attack theoretically possible after public/private key pair exchange is done successfully. Say Alice and Bob have genuine public keys of each other. Is MITM possible further during ...
1
vote
1answer
101 views

Can I use asymmetric encryption for more powerful write-protection?

I have a game that I am developing which uses a locally-stored internal database. It does not matter to me whether a user can read the file (which, to me, means I don't need a symmetric cipher), but I ...
3
votes
1answer
189 views

Questions about OAEP for RSA

I have two questions about OAEP for RSA. How are the number of bits to pad with 0 chosen? For example, if I'm sending a 255 byte message with RSA-2048 I have 8 unused bits (1 byte). Should I split ...
1
vote
1answer
169 views

Check the validity of a rsa key pair with only the public key? [duplicate]

I am currently developing a messaging application that uses rsa end to end encryption. The client generates permanent rsa keys, and sends the public key to my server for account management. As it ...
5
votes
2answers
1k views

How to calculate the time it'll take to crack RSA or DH?

Sometimes the easiest way to describe security of a type of cryptography is to say that "the time it takes to solve for an x-bit key would be y years". How would one go about doing such a calculation ...
6
votes
1answer
644 views

Why Elliptic curve cryptography are not popular in practice

RSA and ElGamal can be implemented using the technique of Elliptic curves. I am confused on why the it seems that Elliptic curves are not so popular in cryptographic applications since they provide ...
1
vote
4answers
253 views

Does it make sense to have a 4000 bit long key?

My question is about the key length of a asymetric algorithm. How is it possible to memorize or remember a key that is about 4000 bits long?
-3
votes
1answer
112 views

RSA public key security issue

The public key for RSA is $[e,n]$. Since $n = p * q$, are $p$ and $q$ already exposed because it takes no effort to figure out $p$ and $q$ from $n$?