an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

3
votes
1answer
129 views

How do I attack an RSA setup where e is even?

As a challenge, we were shown an RSA setup where we have a big $n$ (617 decimal digits), $e=4$, and asked to recover three messages. (However, the messages are padded to the same length as the key ...
3
votes
2answers
157 views

Why do we need Euler's totient function $\varphi(N)$ in RSA?

After we calculated $N = p * q$, we calculate $\varphi(N)$ and use it later to determine $e$ (PR) and $d$ (PU). But why? For decryption and encryption we only use $N$ and don't need $\varphi(N)$. So ...
1
vote
1answer
160 views

Cracking simple RSA when just the ciphertext and one public key is known

Can someone explain to me (Or better yet, point me to a tool that does the brute forcing) how to crack a standard, simple RSA cipher (So don't bother with padding) if I know just one public key, the ...
4
votes
2answers
323 views

Using Lattice-based cryptography for TLS\SSL

Given the general benefits of Lattice-based cryptography, such as: Post quantum Security Security from worst case scenario Efficiency What could the outlook of shifting from RSA \ ECC-based ...
9
votes
1answer
409 views

Given enough RSA signature values, is it possible to determine the public key value?

Given enough RSA signature values, is it possible to determine which public key is required to verify the values? Could there be enough information to establish which key is required? Is there ...
3
votes
1answer
129 views

Public key exponent coprime with totient proof

I read this question a while back (In RSA, why is it important choosing e so that it is coprime to φ(n)?). I was wondering whether there is a proof that shows that a public key exponent e that is ...
3
votes
1answer
41 views

how is the rsa $publickey(n ,e)$ transformed into a textfile allowing its public distribtution?

wikipedia says about the keys itself: The public key consists of the modulus n and the public (or encryption) exponent e. The private key consists of the modulus n and the private (or ...
1
vote
0answers
62 views

Encryption & decryption of integers using modular multiplicative inverse and extended euclidean algorithm

I'm looking for a neat algorithm, which is capable of encrypting an integer to another integer and decrypting it again AND is secure. When I was in university, my professor showed me an awesome way ...
0
votes
1answer
176 views

Cube-Root attack - RSA with low exponent

I have this RSA public key ...
2
votes
2answers
108 views

Implementing RSA with small integers in CUDA

I have found some researches dedicated for speeding-up RSA calculations using CUDA. But I am wondering how they do that, given that the biggest unsigned int that could be declared in CUDA is 64 bit. ...
4
votes
1answer
35 views

Is it okay to use a variable-time RSA implementation to verify TLS certificates?

RSA as implemented by OpenSSL et al. needs to protect against side channel attacks, at a big performance penalty. However, TLS certificate validation involves no secrets. Therefore, I should be able ...
-3
votes
1answer
54 views

How does the math part of RSA work? [duplicate]

I understand the theoretical part of RSA (the concept of public and private keys), but I don't understand the mathematical part. Can anyone please explain it to me in simple terms? Thanks.
0
votes
1answer
50 views

Is sharing the RSA public key secure?

I am trying to understand how RSA public key cryptography works. I have the following questions: Are any attacks / compromises possible if a server sends its public key $(n,e)$ in the clear to a ...
1
vote
1answer
94 views

Really simple RSA style public private key generator

I am giving a talk to high school students and would love to do a real life encryption/decryption demonstration. I am not too familiar with the maths but is it possible to create like a 5-10 bit ...
3
votes
0answers
73 views

How common are weak RSA keys?

There exist certain attacks that can be used against RSA keys whose prime factors are of specific forms, such as one by Coppersmith. How common are these RSA keys? If you generate primes randomly, ...
1
vote
1answer
91 views

What is the importance of 1 < d < φ(n) and 0 ≤ m < n in RSA?

I'm a first year Maths undergraduate and we have recently gone onto RSA. I understand the majority of the algorithm using Fermat's Theorem etc. From the algorithm stated on Wikipedia: 4) Choose ...
1
vote
2answers
773 views

Use cases and implementations of RSA CRT

I discovered the chinese remainder theorem (CRT) version of RSA cryptosystem which is used in many crypto libraries (OpenSSL, Java...). The use of this theorem improves the speed of decryption so, ...
14
votes
1answer
4k views

Assuming a 1024qb quantum computer, how long to brute force 1024bit RSA, 256bit AES and 512bit SHA512

Assuming in the future there was a functioning 1024 qubit quantum supercomputer and it could run Shor's algorithm or Grover's algorithm to crack encryption very quickly. I'm interested in how the ...
0
votes
3answers
133 views

Does RSA have two trapdoors?

I watched some videos from Khan Academy explaining the algorithm for RSA encryption/decryption. They explained that there are two trapdoors, modular exponentiation being one and prime factorization ...
3
votes
1answer
133 views

Relationship between exponent and modulus in RSA (as RSA properties as listed in X.509)

In one of my assignments, I had the following question (Please read on. Not a homework assignment :) ): X.509 (1998 version) lists properties that RSA keys must satisfy to be secure. One such ...
0
votes
2answers
106 views

RSA algorithm private key extraction

Decrypting messages can be done by using the following formula: $$M = C^d \mod n$$ Where $M$ is the decrypted message, $C$ is the encrypted message and $d$ is the private key Theoretically speaking,...
3
votes
2answers
282 views

Is there any reason to use RSA or DSA when we have ECC?

I am having trouble coming up with a use case for RSA or DSA. It appears that ECC is better in every way. Is this true? I am looking for cases where RSA/DSA is superior to ECC, not where it is used ...
5
votes
1answer
120 views

How to attack RSA-CRT with large public exponent?

Suppose we have $(n,e)$ and the ciphertext $c$ where the public exponent $e$ is of the same length, 1023-bit, as the modulus $n$. It is also assumed that the factors of $n$ are balanced. The message ...
2
votes
1answer
154 views

Help understanding basic Franklin-Reiter related message attack

I am trying to understand this attack at the most basic level. I set up the following basic scenario: Let the public encryption exponent, e = 3. Let p, be some arbitrary but known (to the ...
0
votes
1answer
85 views

How to decrypt RSA if ciphertext is less than the modulus and e=3?

I'm given a public key. Using openssl rsa ..... I got the public key has the exponent as 3. When I calculated the size of the ciphertext, it is 8 bits smaller than the 2048-bit modulus. How can I ...
0
votes
0answers
24 views

Is RSA safe anymore? [duplicate]

Some people may have heard of Shor's algorithm. It allows for integer factorization on a quantum computer. This wasn't a problem a little while ago since we didn't have any quantum computers. Google ...
0
votes
1answer
38 views

Key sizes for RSA over elliptic curves

I know that it is possible to define RSA over elliptic curves just as DSA and Diffie-Hellman have been. I know that it doesn't offer much of a speed advantage, but does it at least reduce the size of ...
1
vote
1answer
87 views

Can RSA with padding detect all errors in ciphertext?

I'm new in cryptography and there are a couple of things that i'm not sure if i understand correctly. First, when using padding (PKCS or OAEP), if the chiphertext has errors in transmission we'll we ...
3
votes
2answers
121 views

Can RSA (theoretically) be used as a block cipher?

Assume AES gets a devastating attack making it unusable. Is it possible to use RSA in a secure way that can encrypt data in bulk? I can't see how RSA (assuming OAEP padding) can be used in normal ...
4
votes
3answers
101 views

Choosing which is public vs private key

When I calculate two RSA keys, what if anything, would make any difference which I call the public vs which I call the private key?
3
votes
2answers
241 views

Why are recomended RSA key lengths so high? [duplicate]

I was checking for authoritative sources to back up my recommendation of a minimum RSA key length of 1024 and was shocked to find that NIST 800-56Br1 and FIPS 186-4 both recommend at least 2048 bits ...
0
votes
0answers
61 views

RSA : Double-Encryption and order of Encryption

I'm studying cryptography and we're looking at RSA. We're required to do a double encryption from Alice to Bob and then Bob back to Alice. We've been told the order of encryption is important and it ...
0
votes
2answers
182 views

What is the typical block size in RSA?

If the input text is divided into a fixed block size for encryption and decryption, what could be the typical block size for RSA algorithm for different size of input like 8 MB, 16 MB, 126 MB and 256 ...
3
votes
1answer
170 views

RSA private key finding method

Bob uses RSA with $p=83$ and $q=103$. His public key is $e=445$. Alice claims that she can calculate Bob's private key without using the definition $d=e^{−1}\bmod φ(n)$? But how?
2
votes
1answer
72 views

Why is AES-128 considered secure while RSA needs a 1024-bit size to be considered secure [duplicate]

I got asked this question today and I didn't know the answer, AES-128 is considered secure, the key size is 2^128, so you would need in average 2^127 tries to break the key. Why does RSA need at least ...
1
vote
1answer
194 views

RSA PKCS#1, v1.5 padding output

If I make use of RSA PKCS#1 in v1.5 what padding length is used. Basically, it is not allowed that the plaintext is bigger than the modulus. But what if the length in bits is the same (padding to ...
4
votes
3answers
119 views

Common Modulus Attack not reproducible

I want to calculate a simple example of the RSA common modulus attack. However, the result is not correct and I do not find my mistake. p=$29, q=37, n=p*q = 1073, \phi(n) = 1008, e1 = 5, e2 = 11$ ...
0
votes
2answers
101 views

How to encrypt incomplete block with RSA as a block cipher?

I have a question about an RSA academic example. If we are using block-RSA with a block-size of 3 and we have this message: "android". It is broken into 'and', 'roi', 'd'. How to encrypt the last ...
10
votes
2answers
3k views

How many RSA keys before a collision?

I was wondering how many possible private/public keys exist? If a million people – for whatever reason – would try to generate 5 keys each in the same minute (on the same date and time) is there a ...
3
votes
1answer
137 views

How to determine if padding has been used while encrypting a message with RSA?

I am trying to decrypt a RSA encrypted text file. I have a 2048 bit public key. Analyzing the public key with openssl reveals the exponent used is 3. ...
1
vote
1answer
408 views

MiTM on RSA public key encryption

a) Alice just generated a new pair of public and private RSA keys (pkA , skA ) = ((N, e), d) and would like to start a private conversation with Bob. How can Alice interact with Bob and exchange a ...
3
votes
1answer
268 views

Key exchange and man in the middle issue. Secure solution

I am trying to design MiTM protected key exchange algorithm. For instance I am using RSA asymmetric keys. Alice and Bob respectively have each their own pair of keys. And they should be able to ...
2
votes
4answers
3k views

Is 512-bit RSA still safe for signature generation?

The standard CSP on Windows XP only supports RSA up to 512-bit, which means that it's the maximum key size I can use for authenticity verification of updates. The public key is embedded in the updater,...
0
votes
1answer
105 views

Is this a good communication scheme?

I'm writing a wrapper for a chat program to allow for end-to-end encryption. I'm using Python and PyCrypto to accomplish this. I'd like to use a well known library to do this, but to my knowledge, ...
1
vote
2answers
67 views

RSA numerical questions

Let $n$ be the modular arithmetic, $p$ and $q$ the two large primes such that $n=p*q$ and $e$ the public exponent. Here they are two "simple" numerical questions: If $p = 13$ and $q = 17$, what is ...
2
votes
2answers
127 views

Why does the time complexity of RSA encryption and decryption depend on the size of the modulus?

I would think that the time complexity would depend on the exponent, not the number of bits in the modulus. For example, if the exponent were 5, using the "naive" method, we would perform 5 ...
0
votes
3answers
155 views

How to convert RSA public keys to one key to use for text hashing?

I've recently asked a question about RSA encryption. One of the things that I don't understand is the usage of two public keys. In the example on Wikipedia, a message is encrypted like: ...
2
votes
2answers
96 views

How can a message encrypted with the public key be decrypted with the private key? [duplicate]

I've been reading about encryption and have a basic understanding of the concept. What I don't understand, however, is how a calculation with one key can result in a number that, through calculation ...
6
votes
2answers
189 views

What is wrong in the following algorithm for computing a hash function using RSA?

I'm studying for a cryto exam and have run across this question which has stumped me. What is wrong in the following algorithm for computing a hash function? Take a message $M$, generate a random ...
2
votes
1answer
97 views

Plaintext and ciphertext block sizes

How can you determine the largest plaintext block size and smallest ciphertext size if you used RSA with $n=59768553302699443$ using an alphabet with $27$ characters?