an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

15
votes
1answer
21k views

Calculating RSA private exponent when given public exponent and the modulus factors using extended euclid

When given $p = 5, q = 11, N = 55$ and $e = 17$, I'm trying to compute the RSA private key $d$. I can calculate $\varphi(N) = 40$, but my lecturer then says to use the extended Euclidean algorithm to ...
58
votes
5answers
25k views

How big an RSA key is considered secure today?

I think 1024 bit RSA keys were considered secure ~5 years ago, but I assume that's not true anymore. Can 2048 or 4096 keys still be relied upon, or have we gained too much computing power in the ...
7
votes
2answers
2k views

Which attacks are possible against raw/textbook RSA?

The PKCS#1 standard defines multiple padding schemes for signature generation/verification (EMSA-PSS and EMSA-PKCS1-v1_5), and encryption/decryption (EME-OAEP and the less safe EME-PKCS1-v1_5). ...
21
votes
2answers
11k views

Definition of Textbook RSA

What is the definition of Textbook RSA? What are some of the properties of textbook RSA? How does it differ from other RSAs?
27
votes
2answers
2k views

What security authorities and standards reject $e=3$ in RSA, when, and with what rationale?

In RSA, some security authorities and/or standards allow the public exponent $e=3$, others require or recommend $e>2^{16}$ (or perhaps some other minimum). I gathered the following: PKCS#1 allows ...
18
votes
5answers
4k views

Does RSA work for any message M?

I decided to read the original RSA paper A Method for Obtaining Digital Signatures and Public-Key Cryptosystem because of a question I had about RSA (which is not the question I'm about to ask, but ...
47
votes
4answers
16k views

How can I use asymmetric encryption, such as RSA, to encrypt an arbitrary length of plaintext?

RSA is not designed to be used on long blocks of plaintext like a block cipher, but I need to use it to send a large (encrypted) message. How can I do this?
20
votes
4answers
7k views

Security strength of RSA in relation with the modulus size

NIST SP 800-57 §5.6.1 p.62–64 specifies a correspondence between RSA modulus size $n$ and expected security strength $s$ in bits: ...
20
votes
1answer
10k views

Can you explain Bleichenbacher's CCA attack on PKCS#1 v1.5?

I've studied that the Bleichenbacher's CCA attack on PKCS#1 v1.5. is a base to many versions of attacks in the area. I'm trying to understand that attack, but every explanation I saw starts with the ...
35
votes
11answers
8k views

Now that quantum computers have been out for a while, has RSA been cracked?

D-wave systems has released a commercially viable quantum computer. This means in theory, that all asymmetric encryption algorithms — such as RSA — are now useless due to the speed at which quantum ...
15
votes
3answers
10k views

Why hash the message before signing it with RSA?

The diagram below illustrates the process of digitally signing a message with RSA: As diagram shows, the message is first hashed, and the signature is then computed on the hash, rather than on the ...
22
votes
6answers
2k views

Is it feasible to build an index of prime factors?

Would it be possible to break an RSA key, in for example 1 week of time, if the cracker have already spent X number of years building an index of primes by performing every permutation of existing ...
21
votes
3answers
41k views

RSA encryption with private key and decryption with a public key

When using the RSA cryptosystem, does it still work if you instead encrypt with the private key and decrypt with the public key? What about in the case of using RSA for sender authentication?
7
votes
1answer
13k views

Chinese Remainder Theorem and RSA

Wikipedia has a nice section regarding the speedup of the RSA decryption using the Chinese Remainder Theorem here. I need to understand the implementation of a similar speedup for the encryption ...
10
votes
2answers
3k views

How many RSA keys before a collision?

I was wondering how many possible private/public keys exist? If a million people – for whatever reason – would try to generate 5 keys each in the same minute (on the same date and time) is there a ...
92
votes
4answers
59k views

Why is elliptic curve cryptography not widely used, compared to RSA?

I recently ran across elliptic curve crypto-systems: An Introduction to the Theory of Elliptic Curves (Brown University) Elliptic Curve Cryptography (Wikipedia) Performance analysis of identity ...
4
votes
1answer
1k views

Attack of an RSA signature scheme using PKCS#1 v1.5 encryption padding

My best interpretation of this question is that Java's crypto API has been subverted to perform RSA signature using PKCS#1 v1.5 encryption padding. Assume the signature $S$ of a message $M$ is ...
39
votes
5answers
9k views

How are primes generated for RSA?

As I understand it, the RSA algorithm is based on finding two large primes (p and q) and multiplying them. The security aspect is based on the fact that it's difficult to factor it back into p and q. ...
8
votes
2answers
3k views

Using the same RSA keypair to sign and encrypt

The RSA signature operation is basically the same as encrypting with the private key. In particular, both operations use the same kind of keys. Is it safe to use the same RSA keypair both for ...
6
votes
1answer
2k views

how to use common modulus attack?

I am struck with the following problem: Let Alice, Bob, Chris and Eve communicate over a public network. They encrypt all messages they send using RSA system. Bob and Chris have the RSA modulus $...
48
votes
6answers
36k views

How can I generate large prime numbers for RSA?

What is the currently industry-standard algorithm used to generate large prime numbers to be used in RSA encryption? I'm aware that I can find any number of articles on the Internet that explain how ...
27
votes
2answers
12k views

Impacts of not using RSA exponent of 65537

This RFC says the RSA Exponent should be 65537. Why is that number recommended and what are the theoretical and practical impacts & risks of making that number higher or lower? What are the ...
10
votes
4answers
6k views

Why is it important that phi(n) is kept a secret, in RSA?

Why is it important that $\phi(n)$ is kept a secret, in RSA?
13
votes
4answers
3k views

Why is RSA encryption key based on modulo $\varphi(n)$ rather than modulo $n$?

While calculating RSA encryption key we take modulo $\varphi(n)$ rather than modulo $n$. I can’t understand why it’s done this way.
2
votes
4answers
1k views

RSA with composite numbers

It has been said that RSA uses a modulus product of two prime numbers for security reasons. But does RSA even work correctly if we allow composite integers instead? I think that the answer is "NO". ...
6
votes
2answers
4k views

In RSA, why is it important choosing e so that it is coprime to φ(n)?

When choosing the public exponent e, it is stressed that $e$ must be coprime to $\phi(n)$, i.e. $\gcd(\phi(n), e) = 1$. I know that a common choice is to have $e = 3$ (which requires a good padding ...
5
votes
1answer
947 views

Why can ECC key sizes be smaller than RSA keys for similar security?

I understand how ECC is based on the discrete log problem and RSA on integer factorization. I've read several references that show how a solution to either of these problems can typically be adapted ...
4
votes
1answer
404 views

Is knowing the private key of RSA equivalent to the factorization of $N$?

Given the RSA modulus $N$ the fastest method to factor it is of sub-exponent order. But, now if I know the private key $d$ of RSA, does that mean I can factor $N$ efficiently?. It intuitively seems ...
10
votes
2answers
1k views

Why RSA can't handle numbers above 76?

I'm going to encrypt the characters Zhu, and decrypt them using RSA. I'm using the public key $\{e, n\}$ and private key $\{d, n\}$. The values of $e$, $d$ and $p$ ...
4
votes
2answers
2k views

Is RSA in a ECB-like-mode safe for bulk encryption?

Let's say I would like to communicate with my friend using asymmetric/public-key encryption, e.g. RSA. (Note: I do realize that in practice this is done through an intermediate symmetric key, but ...
23
votes
1answer
30k views

How does RSA signature verification work?

I understand how the RSA algorithm works for encryption and decryption purposes but I don't get how signing is done. Here's what I (think) I know and is common practice: If I have a message that I ...
47
votes
1answer
3k views

Why does my SSH private key still work after changing some bytes in the file?

I (for a test) just randomly altered a private RSA key by opening it up in Vim and changing a few bytes. It is the private part of an SSH key pair used for logging in on a remote system. Puzzlingly, ...
8
votes
2answers
14k views

How much computing resource is required to brute-force RSA?

It's been over 30 years since Rivest, Shamir and Adleman first publicly described their algorithm for public-key cryptography; and the intelligence community is thought to have known about it for ...
9
votes
2answers
11k views

What makes RSA secure by using prime numbers?

I am just learning about the RSA algorithm. Looking at the first two steps: Choose two distinct prime numbers $p$ and $q$. Compute $n = pq$. I have some probably stupid questions: Why do $p$ ...
16
votes
9answers
5k views

RSA with small exponents?

Just to establish notation with respect to the RSA protocol, let $n = pq$ be the product of two large primes and let $e$ and $d$ be the public and private exponents, respectively ($e$ is the inverse ...
7
votes
3answers
4k views

Why hash or salt when signing? [duplicate]

I've seen an example of how to sign using RSA. Besides the signing itself (s = m^d mod n) it also hashes and adds an IV. Why is that needed?
10
votes
3answers
2k views

Would the ability to efficiently find Discrete Logs have any impact on the security of RSA?

This answer makes the claim that the Discrete Log problem and RSA are independent from a security perspective. RSA labs makes a similar statement: The discrete logarithm problem bears the same ...
6
votes
1answer
3k views

Is a known plaintext, ciphertext, and public-key a viable attack on RSA?

Assume Alice and Bob are using RSA to create a common session key and Cindy is listening, attempting to obtain the session key. Alice and Bob each have their public- and private-key pairs ($\left[...
9
votes
2answers
2k views

Multiple-prime RSA; how many primes can I use, for a 2048-bit modulus?

In standard RSA, the modulus $n=p_1 p_2$ is a product of two primes $p_1,p_2$ of the same size. Suppose we construct the modulus as a product of multiple primes $p_1,\dots,p_k$, i.e., $n=p_1 p_2 \...
5
votes
2answers
844 views

Is RSA encryption of a cryptographic hash with a private key the same as signature generation?

It is often said that RSA encryption with a private key is the same as signing (signature generation). Will RSA encryption with a private key over a cryptographic hash give the same result as ...
1
vote
2answers
289 views

Factors of RSA modulus

In the article A Method for Obtaining Digital Signatures and Public-Key Cryptosystems, the original RSA article, it is mentioned that Miller has shown that n (the modulus) can be factored using any ...
11
votes
3answers
7k views

What is the relation between RSA & Fermat's little theorem?

I came across this while refreshing my cryptography brain cells. From the RSA algorithm I understand that it somehow depends on the fact that, given a large number (A) it is computationally ...
8
votes
3answers
3k views

Is sharing the modulus for multiple RSA key pairs secure?

In the public-key system RSA scheme, each user holds beyond a public modulus $m$ a public exponent, $e$, and a private exponent, $d$. Suppose that Bob's private exponent is learned by other users. ...
10
votes
0answers
699 views

Who first published the interest of more than two prime factors in RSA?

Multi-prime RSA is now a well known technique (described here): it uses $k>2$ distinct secret prime factors in the public RSA modulus, with the advantage that, using the CRT, we can gain a speed ...
10
votes
0answers
474 views

Security of RSA for paranoids with padding?

RSA for Paranoids (RSAP) (in cryptobytes v3n1), also known as Unbalanced RSA, is a variant of RSA proposed in 1995 by Adi Shamir, as a mean to increase the RSA public modulus size while keeping ...
14
votes
4answers
4k views

Is it possible to validate a Public Key in RSA?

If I have a 1024-bit number, and someone is telling me that it is in fact a valid RSA public key, is there any way I can quickly validate that it is indeed so (without cracking RSA)? (I suppose I am ...
11
votes
4answers
17k views

Why is padding used for RSA encryption given that it is not a block cipher?

In AES we use some padded bytes at end of message to fit 128/256 byte blocks. But as RSA is not a block cipher why is padding used? Can the message size be any byte length (is the encrypting agent ...
8
votes
2answers
2k views

RSA and prime difference

It is known that the two prime factors $p$ and $q$ of an RSA modulus $n$ should not be too close to each other, otherwise an attacker may factor the modulus. In other words, $\Delta = \left| p - q \...
3
votes
1answer
1k views

Is RSA of a random nonce with no padding safe?

Consider the following protocol: Bob has a private RSA key $B_{priv}$, and Alice knows the public key $B_{pub}$. Alice wants to send confidential messages to Bob (no integrity intended). To send a ...
3
votes
2answers
380 views

Small Prime Difference in RSA

In RSA, the $p$ and $q$ should be randomly generated, and they are the same size. The difference between $p$ and $q$ should not be small. Suppose that $u=|p-q|<20$ and $p \times q =...