an asymmetric (e.g. public-key) cryptosystem, based on modular exponentiation with big exponents and modulus. RSA can be used both for signature and encryption.

learn more… | top users | synonyms

27
votes
4answers
3k views

How big an RSA key is considered secure today?

I think 1024 bit RSA keys were considered secure ~5 years ago, but I assume that's not true anymore. Can 2048 or 4096 keys still be relied upon, or have we gained too much computing power in the ...
24
votes
3answers
6k views

How can I use asymmetric encryption, such as RSA, to encrypt an arbitrary length of plaintext?

RSA is not designed to be used on long blocks of plaintext like a block cipher, but I need to use it to send a large message. How can I do this?
7
votes
2answers
4k views

Definition of Textbook RSA

What is the definition of Textbook RSA? What are some of the properties of textbook RSA? How does it differ from other RSAs?
8
votes
3answers
11k views

RSA encryption with private key and decryption with a public key

Does the encryption with a private key and decryption with a public key works in RSA? Is it done when we use RSA for sender authentication ? Thanks.
53
votes
3answers
32k views

Why is elliptic curve cryptography not widely used, compared to RSA?

I recently ran across elliptic curve crypto-systems: An Introduction to the Theory of Elliptic Curves (Brown University) Elliptic Curve Cryptography (Wikipedia) Performance analysis of identity ...
25
votes
10answers
4k views

Now that quantum computers have been out for a while, has RSA been cracked?

D-wave systems has released a commercially viable quantum computer. This means in theory, that all asymmetric encryption algorithms — such as RSA — are now useless due to the speed at which quantum ...
10
votes
4answers
2k views

Why RSA encryption key is based on modulo $\varphi(n)$ rather than modulo $n$

While calculating RSA encryption key we take modulo $\varphi(n)$ rather that modulo $n$. I couldn't understand why its so?
6
votes
3answers
933 views

Would the ability to efficiently find Discrete Logs have any impact on the security of RSA?

This answer makes the claim that the Discrete Log problem and RSA are independent from a security perspective. RSA labs makes a similar statement: The discrete logarithm problem bears the same ...
14
votes
5answers
722 views

Is it feasible to build an index of prime factors?

Would it be possible to break an RSA key, in for example 1 week of time, if the cracker have already spent X number of years building an index of primes by performing every permutation of existing ...
1
vote
2answers
143 views

Attacks against El Gamal private key

El Gamal encryption involves picking $(p,g,b)$ which is our public key. We compute $b=a^x$ $mod$ $p$. Here, $x$ is the private key which we don't know. What are some efficient and strong algorithms ...
25
votes
4answers
13k views

How can I generate large prime numbers for RSA?

What is the currently industry-standard algorithm used to generate large prime numbers to be used in RSA encryption? I'm aware that I can find any number of articles on the Internet that explain how ...
18
votes
1answer
609 views

What security authorities and standards reject $e=3$ in RSA, when, and with what rationale?

In RSA, some security authorities and/or standards allow the public exponent $e=3$, others require or recommend $e>2^{16}$ (or perhaps some other minimum). I gathered the following: PKCS#1 allows ...
4
votes
4answers
1k views

Why is it important that phi(n) is kept a secret, in RSA?

Why is it important that $\phi(n)$ is kept a secret, in RSA?
4
votes
2answers
3k views

How much computing resource is required to brute-force RSA?

It's been over 30 years since Rivest, Shamir and Adleman first publicly described their algorithm for public-key cryptography; and the intelligence community is thought to have known about it for ...
8
votes
3answers
2k views

Is it possible to validate a Public Key in RSA?

If I have a 1024-bit number, and someone is telling me that it is in fact a valid RSA public key, is there any way I can quickly validate that it is indeed so (without cracking RSA)? (I suppose I am ...
5
votes
1answer
3k views

Chinese Remainder Theorem and RSA

Wikipedia has a nice section regarding the speedup of the RSA decryption using the Chinese Remainder Theorem here. I need to understand the implementation of a similar speedup for the encryption ...
15
votes
5answers
1k views

Does RSA work for any message M?

I decided to read the original RSA paper A Method for Obtaining Digital Signatures and Public-Key Cryptosystem because of a question I had about RSA (which is not the question I'm about to ask, but ...
11
votes
6answers
5k views

Is Diffie-Hellman mathematically the same as RSA?

Is the Diffie-Hellman key exchange the same as RSA? Diffie Hellman allows key exchange on a observed wire – but so can RSA. Alice and Bob want to exchange a key – Big brother is watching everything. ...
7
votes
1answer
3k views

Calculating RSA private exponent when given public exponent and the modulus factors using extended euclid

When given $p = 5, q = 11, N = 55$ and $e = 17$, I'm trying to compute the RSA private key $d$. I can calculate $\varphi(N) = 40$, but my lecturer then says to use the extended Euclidean algorithm to ...
7
votes
3answers
751 views

Is RSA padding needed for single recipient, one-time, unique random message?

I want a way to encrypt files using this process: http://crypto.stackexchange.com/a/15 . That is: generate a random password, use that to AES-encrypt a file, and use an RSA public key to encrypt the ...
4
votes
4answers
4k views

Why is padding used for RSA encryption given that it is not a block cipher?

In AES we use some padded bytes at end of message to fit 128/256 byte blocks. But as RSA is not a block cipher why is padding used? Can the message size be any byte length (is the encrypting agent ...
5
votes
1answer
1k views

Low Public Exponent Attack for RSA

I'm having trouble understanding the algorithm for finding the original message $m$, when there is a small public exponent. Here is the example I'm trying to follow (you can also read it in the 'Low ...
24
votes
3answers
2k views

How are primes generated for RSA?

As I understand it, the RSA algorithm is based on finding two large primes (p and q) and multiplying them. The security aspect is based on the fact that it's difficult to factor it back into p and q. ...
9
votes
3answers
3k views

What is the relation between RSA & Fermat's little theorem?

I came across this while refreshing my cryptography brain cells. From the RSA algorithm I understand that it somehow depends on the fact that, given a large number (A) it is computationally ...
8
votes
2answers
6k views

What's the fundamental difference between Diffie-Hellman and RSA?

What is the difference in the purpose of DH and RSA? Aren't they both public-key encryption?
14
votes
4answers
806 views

Is Wiener's attack on RSA extendable to larger keys with low hamming weight?

Using small private exponents with RSA improves performance. However, it has been shown (Wiener, 1990) that if $\log d \leq \frac14 \log N$, the private exponent $d$ can be reconstructed from the ...
7
votes
2answers
3k views

Impacts of not using RSA exponent of 65537

This RFC says the RSA Exponent should be 65537. Why is that number recommended and what are the theoretical and practical impacts & risks of making that number higher or lower? What are the ...
10
votes
1answer
958 views

Security strength of RSA in relation with the modulus size

NIST SP 800-57 §5.6.1 p.62–64 specifies a correspondence between RSA modulus size $n$ and expected security strength $s$ in bits: ...
13
votes
8answers
2k views

RSA with small exponents?

Just to establish notation with respect to the RSA protocol, let $n = pq$ be the product of two large primes and let $e$ and $d$ be the public and private exponents, respectively ($e$ is the inverse ...
4
votes
2answers
802 views

RSA blind signatures in practice

Hi I have a problem with moving my blind signature implementation from educational (textbook RSA) to more practical (padded RSA) side. David Chaums paper gives a following figure: $r$ - blinding ...
4
votes
2answers
829 views

Are there any standards of multi-prime RSA key generation?

FIPS 186-3 specifies a method to generate DSA parameters. Is there anything similar (official standard or widely-accepted recommendation) that shows how to generate the primes for multi-prime RSA?
2
votes
1answer
715 views

Is RSA of a random nonce with no padding safe?

Consider the following protocol: Bob has a private RSA key $B_{priv}$, and Alice knows the public key $B_{pub}$. Alice wants to send confidential messages to Bob (no integrity intended). To send a ...
6
votes
2answers
364 views

What is the key strength reduction encrypting only 160 bits of data using RSA1024 for signatures?

I am attempting to determine the strength of an incorrectly implemented 1024 bit RSA signature scheme. The weakness in the implementation is that the padding data lacks random numbers. As a result, ...
5
votes
1answer
234 views

In textbook RSA with low public exponent, how big does a random message needs to be?

Assume RSA with a public modulus $N$ of $n$ bits, a small odd public exponent $e$, plaintext $M$ a random non-negative integer less than $2^m$ for some integer parameter $m$, with $M\mapsto C=M^e\bmod ...
2
votes
2answers
215 views

How to calculate the maximum output size for data encrypted with a RSA Private Key?

I have an an encryption algorithm I am working with that looks like this: prv_key_enc(sha1_hash(data)) Where, the RSA parameters are: RSA/ECB/PKCS1Padding 1024 ...
2
votes
2answers
1k views

What makes RSA secure by using prime numbers?

I am just learning about the RSA algorithm. Looking at the first two steps: Choose two distinct prime numbers $p$ and $q$. Compute $n = pq$. I have some probably stupid questions: Why do $p$ ...
2
votes
2answers
415 views

risk of attacker decrypting RSA ciphertext without public or private key

As I describe in my previous question I am trying to decide if it's worth it for me to use the Offline Private Key Protocol in creating some long term private archives, instead of just going with a ...
2
votes
1answer
290 views

using Post-quantum asymmetric ciphers instead of RSA

We can't trust RSA to encrypt our Emails so what is best post-quantum cryptography system as alternative for RSA which provide good security and don't be breakable? because McEliece cryptosystem looks ...
2
votes
3answers
1k views

Is it safer to encrypt twice with RSA?

I wonder if it's safer to encrypt a plain text with RSA twice than it is to encrypt it just once. It should make a big difference if you assume that the two private keys are different, and that the ...
0
votes
1answer
124 views

Attack of an RSA signature scheme using PKCS#1 v1.5 encryption padding

My best interpretation of this question is that Java's crypto API has been subverted to perform RSA signature using PKCS#1 v1.5 encryption padding. Assume the signature $S$ of a message $M$ is ...
9
votes
3answers
376 views

Can we ensure the security of a crypto-algorithm and -implementaton against acoustic cryptanalysis?

Like people always say: “Attacks only get worse…” — which is why I'm asking early. I have been reading the paper “RSA Key Extraction via Low-Bandwidth Acoustic Cryptanalysis” published December 18, ...
5
votes
2answers
187 views

RSA Signature Weak Padding Attack

Assume that we have a message $m$ of size $n$, and it is padded with two 01 bytes in front. Then the signature $s$ is computed using a private key $ks$. Can we ...
8
votes
2answers
368 views

Given a message and signature, find a public key that makes the signature valid

Given a message $M$ and a signature $S$, is it feasible to find a RSA public key $(n,e)$ such that $S$ verifies as a valid signature on $M$ (using this public key)? What if we're given one public key ...
8
votes
5answers
414 views

RSA leak bits to factor N

Suppose you randomly generate large primes p and q as in RSA, and then tell me N=pq but not p or q. Then, you would like to actually let me factor N, except you should tell me as few bits of ...
8
votes
2answers
7k views

When to use RSA and when ElGamal asymmetric encryption

If i am not wrong in cryptography there are 2 basic cryptographic schemes for public key cryptography. RSA encryption whose security is based on the infeasibility of solving the factoring of big ...
5
votes
1answer
3k views

How does RSA signature verification work?

I understand how the RSA algorithm works for encryption and decryption purposes but I don't get how signing is done. Here's what I (think) I know and is common practice: If I have a message that I ...
2
votes
2answers
3k views

How does a chosen plaintext attack on RSA work?

How can one run a chosen plaintext attack on RSA? If I can send some plaintexts and get the ciphertexts, how can I find a relation between them which helps me to crack another ciphertext?
1
vote
2answers
240 views

One-way function and factoring

I am confused about the hardness of the one-way function behind cryptography -- if someone could factor the large number produced back into two primes quickly then the one-way function would be ...
7
votes
3answers
2k views

Why hash or salt when signing?

I've seen an example of how to sign using RSA. Besides the signing itself (s = m^d mod n) it also hashes and adds an IV. Why is that needed?
6
votes
2answers
924 views

RSA and prime difference

It is known that the two prime factors $p$ and $q$ of an RSA modulus $n$ should not be too close to each other, otherwise an attacker may factor the modulus. In other words, $\Delta = \left| p - q ...