SHA-2 is a family of cryptographic hash functions designed by the NSA and published by NIST in 2001. The family includes various output lengths (224, 256, 384, and 512 bits).

learn more… | top users | synonyms

37
votes
2answers
11k views

“SHA-256” vs “any 256 bits of SHA-512”, which is more secure?

In terms of security strength, Is there any difference in using the SHA-256 algorithm vs using any random 256 bits of the output of the SHA-512 algorithm? Similarly, what is the security difference ...
19
votes
2answers
10k views

Are there any known collisions for the SHA-2 family of hash functions?

Are there any known collisions for the hash functions SHA-1, SHA-224, SHA-256, SHA-384, and SHA-512? By that, I mean are there known values of $a$ and $b$ where $F(a) = F(b)$ and $a ≠ b$?
17
votes
7answers
4k views

Is calculating a hash code for a large file in parallel less secure than doing it sequentially?

I would like to improve the performance of hashing large files, say for example in the tens of gigabytes in size. Normally, you sequentially hash the bytes of the files using a hash function (say, ...
16
votes
2answers
19k views

HMAC-SHA1 vs HMAC-SHA256

I have three questions: Would you use HMAC-SHA1 or HMAC-SHA256 for message authentication? How much HMAC-SHA256 is slower than HMAC-SHA1? Are the security improvements of SHA256 (over SHA1) enough ...
16
votes
2answers
2k views

Are common cryptographic hashes bijective when hashing a single block of the same size as the output?

It's been said that CRC-64 is bijective for a 64-bit block. It the corresponding statement true for typical cryptographic hashes, like MD5, SHA-1, SHA-2 or SHA-3? For example, would SHA-512 be ...
14
votes
1answer
4k views

Assuming a 1024qb quantum computer, how long to brute force 1024bit RSA, 256bit AES and 512bit SHA512

Assuming in the future there was a functioning 1024 qubit quantum supercomputer and it could run Shor's algorithm or Grover's algorithm to crack encryption very quickly. I'm interested in how the ...
12
votes
1answer
821 views

Is Wikipedia's table about SHA-2 collisions correct?

I was looking a Wikipedia article on SHA-2, and the "Comparison of SHA functions" table seems to indicate that SHA-2 is less secure than SHA-1. Is this true, or is the table wrong / misleading? ...
10
votes
1answer
1k views

Using SHA-256 with different initial hash value

FIPS 180-3 defines the initial hash value for SHA-256 as the first 32 bits of the fractional parts of the square roots of the first 8 primes 2..19. What would be the risks of using a different value ...
9
votes
3answers
1k views

SHA-224 Purpose

One of the new features of Java 8 is the SHA-224 message digest. What is the use case for having a 224-bit-length hash?
9
votes
1answer
635 views

Why are the initial states of hashes functions (like SHA-1) often non-zero?

There is already a question asking "Why initialize SHA1 with specific buffer?" and my question follows on from this: Why are the initial states of hash functions often non-zero? For most, I have ...
8
votes
4answers
2k views

Is SHA-256 secure as a CTR block cipher?

Generate a 256-bit random nonce. XOR it with a 256-bit reusable symmetric key. This is x. We represent numbers in simple binary instead of a counting function. ...
8
votes
1answer
589 views

Understanding how SHA-512 achieves its design goals

The Wikipedia entry on SHA-2 contains a usable pseudocode recipe. In the hope of some deeper understanding, I implemented SHA-256 and SHA-512 from it. This was helpful, but I still don't think I have ...
7
votes
1answer
60 views

Difficulty to find any preimages $a$ and $b$ for given $V$ so that $H(a) \oplus H(b) = V$?

Suppose I have the values $a$, $b$, and $V = H(a) \oplus H(b)$ with inputs $a \neq b$ and $H$ being SHA-224. None of these values are a secret. How secure is it to assume that no other possible values ...
6
votes
4answers
22k views

Does the SHA hash function always generate a fixed length hash?

I'm using the SHA1/2 family of algorithms for a particular project. I was wondering if all the SHA algorithms return a fixed length hash regardless of the length of the data.
5
votes
3answers
1k views

A simple block cipher based on the SHA-256 hash function [duplicate]

I've come up with this little routine for doing encryption using the SHA-2 (in this case SHA-256) hash function. As such it is a block cipher with a 256 bit (32 byte) block size and an arbitrary key ...
5
votes
2answers
678 views

Which bitwise operations are used in SHA-256?

From the wikipedia entry on SHA-256 I'm a bit confused about which operations actually go into the algorithm. From the pseudo code it appears the operations are $\texttt{xor}$, $\texttt{and}$, rotate, ...
5
votes
3answers
801 views

Timing Attacks on ECDSA, ECDHE, AES and SHA2

Are there any known timing attacks (both practical and theoretical) on any implementations of the following? ECDSA (I'm aware of this one - are there any applicable to prime fields?), ECDHE (again, ...
5
votes
2answers
5k views

Does SHA-1024 hash exist?

Does SHA-1024 cryptographic hash function exist similarly to SHA-512? If not, what's the reason for that? Links: SHA-2 at Wikipedia
5
votes
1answer
1k views

What does Maj and Ch mean in SHA-256 algorithm?

I'm guessing they're some kind of standard function but what do they do and what do the names mean? A little explaination or link me to an article would be great.
5
votes
4answers
309 views

Are derived hashes weakening the root?

Given a root hash root = H(plaintext) and two (or more) derived hashes h1 = H(salt1 + root) h2 = H(salt2 + root) would the ...
5
votes
1answer
3k views

SHA1 no longer considered secure for SSL Certificates — what about Cipher Suites?

Many browsers and Internet companies have recently claimed that SSL Certificates with a signature algorithm of SHA1 will imminently no longer be considered secure. Most notably, Google and Google ...
5
votes
1answer
98 views

Transforming SHA-512 into SHA-512/256?

Based on my skimming over FIPS 180-4 it looks like the only difference between SHA-512 and SHA-512/256 is the initial hash value and the fact that the final output is truncated to 256 bits. My ...
4
votes
3answers
205 views

Can the SHA256 hashes of consecutive integers be attacked?

Suppose that the attacker knows the SHA256 values of integers $n, n+1, n+2 ... n+k$. $n$ is sufficiently big, so we do not expect to be able to brute force $n$ just by $\operatorname{SHA256}(n)$ ...
4
votes
1answer
2k views

HMAC-SHA1 input size

I know that the HMAC is a message authentication code that uses a cryptographic key in conjunction with a hash function (SHA1 , MD5, etc.). The HMAC output is 160 bits for HMAC-SHA160 and 256 bits for ...
4
votes
1answer
231 views

Is the last step of an iterated cryptographic hash still as resistant to preimage attacks as the original hash?

Considering a cryptographic hash, such as MD5 or SHA2, denoted by the function $H(m)$ where $m$ is an arbitrary binary string, there is a lot of material available that deals with potential weakness ...
4
votes
1answer
174 views

Is hashing a list of hashes safe?

I have an arbitrary long list of hashes (e.g. git tree hashes), and I'm wondering by how much I am increasing the risk of hash collisions by condensing them into a single hash, like so: ...
4
votes
0answers
120 views

Rationale for use of right-shift (rather than rotate) in SHA-2?

The SHA-2 hashes in FIPS 180 define $\Sigma$ and $\sigma$ bijections of words, with $\Sigma$ used in the round function, and $\sigma$ used in preparing 48 words of message schedule from 16 words of a ...
3
votes
1answer
787 views

Why are these specific values used to initialise the hash buffer in SHA-512?

I'm reading the book Network Security Essentials written by William Stallings. To create a message digest with SHA-512, we have to go through some steps: append padding bits. append length ...
3
votes
1answer
4k views

How is input message for SHA-2 padded?

I read about how is an input message prepared to be hashed by MD4,MD5 or SHA-1: Step1 Append padding bits The input message is "padded" (extended) so that its length (in bits) equals to 448 ...
3
votes
2answers
190 views

What is the difference between SHA-3(Keccak) and previous generation SHA algorithms?

SHA-1 and SHA-2 share the same structure and mathematical operation as their predecessors - SHA-0 and MD5. Both SHA-0 and MD5 have been broken. This is one of the main reasons why SHA-1 is considered ...
3
votes
2answers
104 views

Same 64-bit preimage resistance security for SipHash and SHA-512/64?

If I have to chose a 64 bit preimage resistant hash function; will there be any difference in security between SipHash and SHA-512/64 (SHA-512 truncated to 64 bits)? How long will it take an ...
3
votes
1answer
11k views

Decrypting the password from SHA-512 hash value

I am currently studying AES algorithm and writing a Code using Python. I am trying to add 'Salt' into the user input password, Here is what I am doing, ...
3
votes
2answers
61 views

Is Schannel supposed to use SHA1 for (EC)DHE params?

I captured a TLS 1.2 handshake on my server (WIN2012.R2/IIS 8.5) and noticed that SHA1 is being used to hash ECDHE parameters despite both the server and client(s) supporting SHA2 signatures. ...
3
votes
1answer
110 views

SHA512 vs HKDF key expansion

I'm working on a secure file storage server. This server allows users to upload and download files based on a "seed". This "seed" is a 128-bit value. From this 128-bit seed, we run SHA512 to derive a ...
3
votes
1answer
124 views

How can I generate a good password from a SHA512 hash?

I have to change local administrator passwords on machines. I don't want to store password in a database. I have to generate a password that I can find later to connect to the machine again. So I ...
3
votes
1answer
84 views

Does displaying HMAC hashes of user inputs compromise the HMAC validation?

Here is the scenario: "SECRET" is a secret key that is kept private and only used in this one application. The application allows users to enter in any "VALUE" (within various open-ended limits such ...
3
votes
1answer
18 views

Randomness and reversibility of a sequence generated by taking sha256 hashes of an predictably-changing input?

Let's say we generate a sentence in a way like for example this: Fix an initial seed. Attach '1' at the end of the seed and compute sha256 of such a string. This hash is our first number. Now attach 2 ...
3
votes
2answers
389 views

Algorithm for generating OAuth tokens

I'm trying to find a good algorithm for generating authorization codes, access tokens and refresh tokens in an API. Currently, I am looking into the following setup: Tokens are generated using the ...
3
votes
1answer
38 views

How are the IVs of SHA512/256 and SHA512/224 calculated?

This seems odd to me, because there are a lot of resources out there saying that the initializer values of SHA512 and SHA384 are the first 64 bits of the fractional parts of the square roots of prime ...
3
votes
0answers
83 views

Is modular Barrett reduction usable for Ed25519?

I currently try to implement Ed25519 following this draft. I have implemented every field operation except the reduction by the group order $q$ (in chapter 5). I looked for a reduction algorithm and ...
2
votes
1answer
258 views

Is base64 the best two-way hash function to encrypt and trasmit a set of integer numbers via Internet?

I am writing a mobile game and I need to save my game data on my game server, So crackers can not find and access the saved files(data) on their mobile, the game data can be expressed by numbers, So, ...
2
votes
2answers
270 views

What makes SHA-2 and SHA-3 have security levels half their output hash length?

The tag wiki for sha-256 says, in part: SHA-256 ... processes the input in 512-bit block and has a 256-bit output, for a 128-bit security level. I'm not a cryptographer, just an interested ...
2
votes
1answer
105 views

Would SHA-1 be safe for certificates with short validity?

There are articles floating around the topic of SHA-1 deprecation. The gist of it is that in (mostly) developing countries, people are still using mobile/computing devices that are 5 years old (or ...
2
votes
1answer
79 views

Is “Bit Independence” of SHA-2 hashes secure?

I know bit independence is good in SHA2 function output, but is it truly 100% secure? For example: Y = SHA512(secretKeyNonce256bit) A = first 32ytes / 256bits of Y, used as message encryption key B ...
2
votes
1answer
465 views

Encryption and HMAC key derivation

I'm deriving keys from a user-supplied passphrase for symmetric encryption using AES-256 in CBC mode with a HMAC for authenticity/integrity. My key derivation function currently looks like this: ...
2
votes
1answer
945 views

Digital Signature size requirement

What is an approximate length for a digital signature (SHA) given the following? Using RFID tags, size ranging from 100 to 2000 bytes (8000 bits), our project is setting aside a portion for a digital ...
2
votes
1answer
34 views

What's the difference between PBKDF and SHA and why use them together?

I've been reading a little bit about hashing lately and according to AgileBits, they use "SHA512 within PBKDF2" in their new vault file. I've looked in Wikipedia for both names and I know PBKDF2 is a ...
2
votes
0answers
54 views

SHA-512 hash collisions [duplicate]

Possible Duplicate: Is SHA-512 bijective when hashing a single 512-bit block? Is there any guarantee that there are no collisions for all 512-bit input values for SHA-512 (every 512-bit ...
1
vote
2answers
716 views

What is the best hash for HMAC?

Long question but I am starting to lose sight of all the HASH algo's there are. I know SHAKE128 and 256 are part of the SHA-3 standard but is the SHA3 standard officially released yet? i can only ...
1
vote
2answers
1k views

What is the length field in SHA-512 padding?

If I am using SHA-512 on a message and need to determine the padding field and length field, how do I determine the length field? I think I understand the padding, but not the length field. For ...