Questions tagged [symmetric]

Symmetric cryptosystems assume two communicating entities share a pre-established secret key.

Filter by
Sorted by
Tagged with
0
votes
1answer
388 views

How to store keys for a cascading encryption?

What is the best way to implement a cascade encryption? I'm trying to figure out how to cipher a string (or message) using Serpent-Twofish-AES and then store the keys. I'll provide an explanation, ...
2
votes
1answer
309 views

Are there any protocols that are truly secure from active and passive MITM attacks?

Are there are any cryptographic protocols or algorithms that can prevent active MITM attacks or interference when initiating a new connection to a server or someone you have not exchange keys with ...
3
votes
1answer
522 views

Can we decrypt in this order when the message is encrypted twice?

If we encrypt a message twice with symmetric key $k_1$ first and then $k_2$ like $E_{k2}\{E_{k1}\{m\}\}$ , ideally we should decrypt with $k_2$ first and then $k_1$ but is it possible to decrypt with $...
4
votes
1answer
991 views

Serpent cipher : Osvik S-Boxes confusion and test vectors

I'm having hard time with the implementation of the S-Boxes by Osvik found in this paper: Speeding up Serpent. At the end of the paper, all the s-boxes are given and then, I just implement them. Here'...
2
votes
1answer
873 views

Why does Merkle's Puzzle requires Eve quadratic complexity of effort to break the system?

The way Applied cryptography 2ED explains the puzzle is as follows (I paraphrase it): Bob generates 2^20 messages of the form x,y where ...
4
votes
1answer
7k views

What's the difference between the long term key and the session keys?

I'm currently studying secret key cryptography, and I've come across the terms "long-term key" and "session key". What's the difference between these two kinds of keys?
3
votes
1answer
276 views

Camellia cipher - is it a symmetric or asymmetric cipher?

I read a wiki page about Camellia cipher and know that it is a block cipher that can use 128-bit, 192-bit or 256-bit keys. But I cant find any information about if its a symmetric cipher (uses one key ...
1
vote
3answers
703 views

Does MAC provide origin authentication? Why not just use symmetric encryption?

Let's assume Bob and Alice has a secret key for MAC. If MAC is constructed by the key and the message, that means that both Alice and Bob can construct the exact same message and MAC. So, Bob can ...
4
votes
2answers
3k views

Symmetric vs. Asymmetric cryptographic approaches to data security

I know the basic differences between Symmetric vs. Asymmetric cryptography, but I'd love to know more details: Exactly why is the asymmetric approach slower than the symmetric? Why does it make use ...
7
votes
1answer
242 views

Specification of the scream stream cipher is unclear

I am implementing in C++ the Scream stream cipher. The Scream family is composed of Scream-0, Scream-S and Scream-F. For this question, assume that I'm using Scream-S. The specifications of the ...
2
votes
3answers
2k views

Using Whirlpool hashing function to encrypt data

I've read that the Whirlpool hash function can produce footprints that could be used as a pseudorandom generator. Is it "OK" to use it to encrypt some data using something like the following? ...
1
vote
0answers
58 views

Algorithm for sharing secret information with redundant keys [duplicate]

I have an information that I would like to encrypt and give it to someone else. I would like to encrypt it using N separate passwords (say 5) and give each password to some other persons. However the ...
4
votes
1answer
2k views

Where is the S-Box generated in Rijandel/AES?

It's rather kind of lame questions, and I can't find good and clear explanation: In which step of Rijandel is S-box generated? Is the S-box reused in every round of cipher or is generated in every ...
-3
votes
1answer
628 views

List of available symmetric & assymetric ciphers [closed]

I was looking all over the Internet list of ALL existing symmetric and asymmetric ciphers. I know that there's, for example, AES, DES, Blowfish, DSA. But how about more? Where to find such list?
3
votes
1answer
89 views

Should I use distinct MACs for each user, or should I use a *direction* flag when communicating?

Alice and Bob want to communicate using a stream cipher. At the beggining, they create a session key $K_s$ and exchange it via some secure channel (using some asymmetric algorithm). After every ...
-1
votes
2answers
316 views

What are the weaknesses of this message exchange protocol?

Here is a protocol for a key exchange: Bob encrypts a message $m$ with his key $K_B$: $m_1 = E_{K_B}(m)$. Bob send the result $m_1$ to you. Alice encrypts my encrypted above message with her own key: ...
7
votes
3answers
814 views

Why the symmetric key layer in PGP?

I've been familiarizing myself with the basics of PGP. If I understand correctly, PGP symmetrically encrypts the data of interest using a random single-use key, then encrypts the encrypted data and ...
3
votes
4answers
4k views

Initialization vector in symmetric-key encryption

Can we use symmetric-key algorithms without an initialization vector? I am making an app where both the sender and receiver share a key and there is no way to create an initialization vector for each ...
3
votes
1answer
2k views

Generating an IV for ESP 3DES-CBC

I have an application written in C, running in Linux. It uses IPsec (ESP) (manually putting the IPSec packet together) to send certain packets. The algorithm used ...
0
votes
2answers
481 views

Cryptographic Symmetric Stream Cipher

Let me know a cryptographic symmetric stream cipher system with only two functions say S() and P() and it should satisfy the ...
1
vote
1answer
223 views

Random decomposition of symmetric key

Considering a symmetric cipher (i.e : AES in counter mode), is it possible for any given key to be randomly decomposed into other keys without knowing the message or the ciphertext, such as : ...
6
votes
3answers
8k views

why DES encryption uses different modes like ECB,OFB?

As without using modes we can also encrypt and decrypt data then what is the need of using modes in DES?
3
votes
1answer
466 views

Is this an acceptable authenticated encryption?

After much deliberation, I've decided to use a normal Encrypt-then-MAC scheme instead of an authenticated encryption mode such as GCM as authenticated encryption primitive. This is due to the lack of ...
4
votes
1answer
2k views

Homomorphic Encryption

Homomorphic Encryption (HE) which supports any function on ciphertexts is known as Fully Homomorphic Encryption (FHE), while Partially Homomorphic Encryption (PHE) includes encryption schemes that ...
3
votes
3answers
528 views

What is the best way to send two floating point numbers to a server on the internet from a small device such as an arduino?

I was thinking about sending some sensitive data (temperature) from an arduino (AVR 8-bit processor) to a server on the internet. But I would like to make sure that it would not be possible for Eve ...
3
votes
1answer
100 views

How does the possible attack on passwords and salts mentioned in PKCS#5 v2.1 work?

From PKCS#5 v2.1, 4.1 Salt (page 6, emphasis by me), also in v2.0, RFC 2898: In password-based encryption, the party encrypting a message can gain assurance that these benefits are realized ...
1
vote
1answer
650 views

brute force attack on KDF vs KEY

if we believe 256bit keys are secure in AES against any brute force attack, is that possible we use a KDF (convert user's weak entered password in truecrypt into a fixed AES key) with too much round ...
2
votes
2answers
147 views

Prepend information about encryption implementation to the stored data

I want to preface this by saying i will not be using any of this code/information in a live project, this is only for learning/fun (so I welcome some speculation) I was looking at how the PHP crypt() ...
2
votes
2answers
697 views

IV Security Clarification

After doing lots of reading on SO and other websites relating to AES cryptography, I am trying to understand the security issues surrounding IV's. There seems to be a lot of confusion and ...
3
votes
2answers
518 views

What is the best way to store sensitive information on the client?

I am very inexperienced with cryptography and would like some advice on how to store some sensitive information on client machines. I have some information stored in a central database on my server. ...
3
votes
1answer
518 views

When confusion is applied during encryption?

I know confusion is used in cryptography to make it more difficult to identify any relationship between the ciphertext and the symmetric key. I want to know when the confusion is applied during ...
2
votes
1answer
455 views

Is this method for exchanging private key using RSA sound?

Bob know's Alice's public key, and he wants to make sure he's connecting to the one which has that key. Furthermore, Alice wants to verify when she gets a connection from Bob who'll give his public ...
1
vote
1answer
140 views

Question about use of IV in this cipher

Main cipher objective : Generate a keyed CSPRN stream, that does not expose useful information about the state of the CSPRNG, and xor this with the plaintext. To prevent an attacked who could somehow ...
22
votes
2answers
6k views

Deriving Keys for Symmetric Encryption and Authentication

So here's the concept. Rather than storing 2 keys and using a random IV, which presents its own problems (key rotation, ensuring no key is used in more than 2^32 cycles, sharing the keys, etc), is it ...
5
votes
2answers
6k views

Difference between symmetric and asymmetric hash function?

The Linux kernel supports symmetric and asymmetric hash functions. E.g. sha1, sha256, ... See tcrypt.c and search for test_hash_speed and ...
1
vote
1answer
7k views

True 128bit secured password length?

assume we say 128bit keys are secure so a 16 character long password is safe, but if i even use lower case and upper case letters with numbers and special characters on my keyboard its about 80 ...
7
votes
2answers
1k views

Is storing the hash of a key together with ciphertext encrypted with that key secure?

Is it secure to store the hash of a symmetric cipher key along with data encrypted with that key? Are there any circumstances or algorithms in which this combination could lead to potential weaknesses ...
1
vote
2answers
2k views

Does gpg's symmetric encryption keep information about the filename?

If I encrypt a file with gpg -c file.zip, and change the filename. Is there any way I can restore the filename as I used as a password. or the name encrypted to?
5
votes
2answers
752 views

Encryption scheme with equivalent keys?

I've long been looking for a symmetric encryption scheme (or algorithm) with equivalent keys. Let me define what I want: Symmetric encryption algorithm with encryption function $E_k$ and inverse ...
5
votes
1answer
611 views

Is this a good way to encrypt a file?

I need to encrypt a file, distribute it over an insecure channel, and decrypt it later. Using a symmetric-key algorithm. Here's what I intend to do: Get a password P from the user. Generate a 16-byte ...
1
vote
1answer
1k views

How do I calculate the maximum plain text length allowable for a certain cipher text length?

I am encrypting and storing sensitive values in the database. I have a set max length in the database, but in order to provide useful user feedback, I'd like to know the max input I should allow for a ...
0
votes
1answer
380 views

Polynomial for secure communication

Can we use a polynomial $P(x)$ to securely communicate ? For example Alice & Bob agree on a degree of a polynomial. The value $x$ & the coeficients are generated from a seed using a hash ...
1
vote
1answer
7k views

AES GCM symmetric encryption of data at rest in c#, ciphertext much longer than plaintext

I've written encryption/decryption routines using AES GCM. Code can be found here. I recently realized that the cipher text is longer than I believe it should be. It should add the tag and IV onto ...
5
votes
1answer
3k views

Is this design of client side encryption secure?

I want to build a secure file storage web application. Users should be sure that server doesn't know how to decrypt files so encryption should take place at client side (i.e. in Javascript) and TLS ...
3
votes
2answers
680 views

Are there standards for transport layer security using only symmetric keys?

I have an embedded system with AES-128 implemented in hardware. There is very little flash/RAM and the (8-bit) CPU runs relatively slowly. Public key crypto isn't a viable option. This system is ...
3
votes
1answer
802 views

Separate Read and Write Keys in TLS Key Material

Why does the TLS protocol use different symmetric keys for receiving and sending data? Isn't it enough to have a single key used for both reading and writing?
1
vote
2answers
144 views

How can I protect against the failure of a block or symmetric cipher?

Can I protect against the failure of a block or symmetric cipher by chaining different techniques together? If so what implementation details should I be aware of? Are some combination of ciphers ...
5
votes
1answer
1k views

Can I secure my key by XORing it with a hashed password?

I'd like to build a simple password-protected symmetric key system. The key-creation process in my system operates as follows: The system creates a 256-bit key purely at random. The user chooses a ...
2
votes
3answers
569 views

Realize a MAC using a Pseudo-random function?

Given a pseudo-random function and assuming that we do not have any other tools, How can we construct a MAC? I believe this can be done. Would like to know if there is more than one way of doing ...
9
votes
5answers
15k views

Why do we need asymmetric algorithms for key exchange?

In SSL protocols, both symmetric and asymmetric algorithms are used. Why is it so? The symmetric algorithms are more secure and easier to implement. Why are asymmetric algorithms usually preferred in ...

1
9 10 11
12
13